Solid State Logic MixPander User manual

Brand: Solid State Logic

Model: MixPander

Category: Audio cards

Type: User manual

soundscape mixpander



DSP-Powered PCI Audio Card

for PC based Audio Workstations

Installation &

QuickStart Guide

Version 4.3

English Version

Soundscape Mixpander

Page 2 of 59

Table of Contents

Welcome to the SSL Soundscape Mixpander ............................................................................ 4

1. Introduction ....................................................................................................................... 5

How to use the manuals ............................................................................................................................................. 5

Reading conventions .................................................................................................................................................. 5

Key commands and key combinations ............................................................................................................... 5

Menus ...................................................................................................................................................................... 5

Screenshots .............................................................................................................................................................. 5

Disclaimer .................................................................................................................................................................... 6

Trademarks .................................................................................................................................................................. 6

Website ......................................................................................................................................................................... 6

SSL Soundscape Mixpander ...................................................................................................................................... 6

Software drivers .......................................................................................................................................................... 7

Digital mixing, effects and processing ..................................................................................................................... 7

DSP-based processing ................................................................................................................................................ 7

Native effects and processing plug-ins .................................................................................................................... 8

Studio friendly! ............................................................................................................................................................ 8

Master Clock synchronization options .................................................................................................................... 8

2. Technical Specifications ..................................................................................................... 9

SSL Soundscape Mixpander ...................................................................................................................................... 9

SSL Soundscape Mixpander/9 .............................................................................................................................. 9

SSL Soundscape Mixpander/5 .............................................................................................................................. 9

SSL Soundscape Mixpander/9 and Mixpander/5............................................................................................... 9

3. Installation ...................................................................................................................... 10

Minimum system requirements .............................................................................................................................. 10

PC Configuration ...................................................................................................................................................... 10

Recommended BIOS settings .............................................................................................................................. 11

IRQ assignment .................................................................................................................................................... 11

Hardware and software installation overview ..................................................................................................... 12

Installing the SSL Soundscape Mixpander ............................................................................................................ 13

Connecting the SSL Soundscape Mixpander to the XLogic Alpha-Link ........................................................... 14

Installing the SSL Soundscape Device Drivers ..................................................................................................... 15

Installing the SSL Soundscape Device Drivers under Windows XP .................................................................. 16

Device Manager .................................................................................................................................................... 19

Preparing Windows Plug and Play ........................................................................................................................ 20

Installing the SSL Soundscape Mixer software ..................................................................................................... 21

Shortcuts and automatic SSL Soundscape Mixer startup .................................................................................... 22

Installing Soundscape format DSP-powered plug-ins ......................................................................................... 24

Installing the SSL Soundscape WDM/KS Driver under Windows XP .............................................................. 26

Plug and play device detection .......................................................................................................................... 26

Software updates and uninstalling older software versions ............................................................................... 31

Driver updates and uninstalling older driver versions ....................................................................................... 31

Configuring a multiple unit system ....................................................................................................................... 32

4. Driver Settings ................................................................................................................. 33

Soundscape Mixpander

Page 3 of 59

Using the WDM/KS drivers ..................................................................................................................................... 33

Using the Multimedia (MME) drivers.................................................................................................................... 34

Using the SSL Soundscape ASIO-2 driver ............................................................................................................. 35

Multiple SSL Soundscape hardware devices and Cubase .............................................................................. 36

5. Quick Start Tutorial .......................................................................................................... 37

Starting the SSL Soundscape Mixer for the first time .......................................................................................... 37

Entering the mixer password .................................................................................................................................. 39

Setting the Master Clock .......................................................................................................................................... 42

Mixer concepts ........................................................................................................................................................... 42

Mixer example: the default 64 Ch Mixer................................................................................................................ 44

Supplied mixer files .................................................................................................................................................. 47

Modifying the routing .............................................................................................................................................. 48

6. Step by Step Multitrack Recording .................................................................................... 50

Multitrack recording example using the SSL Soundscape Mixer and Cubase SX ........................................... 50

Index .................................................................................................................................. 55

Soundscape Mixpander

Page 4 of 59

Welcome to the SSL Soundscape Mixpander

Congratulations for your purchase of an SSL Soundscape Mixpander PCI audio card.

This user guide describes the use of the SSL Soundscape Mixpander DSP-powered audio card in

conjunction with the XLogic Alpha-Link Converter series. For more information on using the SSL

Soundscape Mixpander as a DSP expansion card with the Soundscape 32 DAW, please refer

directly to the Soundscape Editor manual.

Please be assured that the SSL Soundscape Mixpander will provide you with many years of

reliable service and a level of audio quality normally associated with systems costing several times

its price, while its expandability, the ergonomics of the software and the worldwide customer

support from Solid State Logic are unmatched at any price.

IMPORTANT: Please register your SSL Soundscape Mixpander audio card on our website.

This will ensure that you receive notifications of future software upgrades and other

important information, and that your guarantee is registered. Registration will also make

you eligible for technical support. The Solid State Logic home page is at: http://www.solid-

state-logic.com/

Solid State Logic is committed to the development and marketing of top-class solutions for native

PC-based digital audio recording systems.

The SSL Soundscape Mixpander PCI card, used in combination with our Alpha-Link audio

converter products, delivers the most powerful input/output, DSP-powered mixing, effects and

processing solution for PC-based audio recording and editing systems.

The included SSL Soundscape Mixer software, a high-end application based on the mixer section

of the SSL Soundscape Editor DAW software, offers unparalleled flexibility and ease of use. Its

functionality goes far beyond that of a basic routing system between the external inputs and

outputs and your native audio applications, offering a totally configurable mixer architecture and

support for Soundscape format DSP-powered plug-ins from Solid State Logic and third party

developers including Cedar Audio, Dolby Laboratories Inc., Wave Mechanics, TC Electronic, Sonic

Timeworks, Aphex Systems, Arboretum Systems, Spinaudio, Drawmer, Acuma Labs and

Algorithmix. VST plug-ins running on the host PC’s CPU can also be inserted directly in the

Soundscape Mixer. Naturally, simple preset mixer configurations can be loaded for basic routing

tasks if you wish to work from a single, native application.

The SSL Soundscape Mixpander PCI card and associated software run under Microsoft®

Windows® 2000 and Windows® XP.

Soundscape Mixpander

Page 5 of 59

1. Introduction

How to use the manuals

The SSL Soundscape product range has been designed from the ground up to be easy to use. If you

are familiar with the Windows environment, installing PCI cards and the basics of recording and

playing back digital audio, you could probably just set the system up and feel comfortable running

a session within an hour. However, the SSL Soundscape Mixer offers a wealth of powerful and

helpful features that you will only discover quickly by reading the SSL Soundscape Mixer

Reference Guide, as well as this Installation and QuickStart Guide. It is therefore advisable, at

some point, to read them both from cover to cover. For example, the Mixer is fully configurable,

and while a few ready-made Mixers are provided, it is absolutely necessary to read the “Mixer”

chapter of the Reference Guide early on to take full benefit from its capabilities. If you are new to

digital audio recording, reading the manuals first is highly recommended. Please make sure you

understand the Master Clock and Sample Rate concepts and that you understand the Mixer

software’s routing possibilities. It is also a good idea to have the system switched on while you

read the manuals, so that you can experiment with the features you read about. We trust that you

will soon feel confident creating and using your own mixer configurations. However, even when it

has become second nature, the comprehensive Table of Contents and Index (located respectively at

the beginning and end of each manual) will provide convenient ways to check specific information

whenever you need it.

Reading conventions

Key commands and key combinations

Some functions of the SSL Soundscape Mixer can be accessed through the use of computer

keyboard keys or key combinations, as well as by using a mouse or other input device. In this

manual computer keys will be shown between square brackets. For example, the key for the letter

“E” will be written: [E]. Key combinations will be written using “+” signs. For example, pressing

the “D” key while holding the “Control” key will be written as [Ctrl]+[D].

Menus

Where appropriate, to indicate a “path” under one of the main menus, the following format will be

used: menu: Header|Submenu 1|Submenu 2|Submenu3|Item.

Screenshots

The appearance of the SSL Soundscape Mixer software on your computer screen may be different

from the screenshots in this manual. This could be because your SSL Soundscape hardware

Soundscape Mixpander

Page 6 of 59

configuration is different, because you are using a different version of Windows, because you are

using different Windows settings, or because the look of the SSL Soundscape Mixer can vary (e.g.,

the Toolbar can be moved around the main window). The screenshots themselves were not always

made using the SSL Soundscape Mixer’s default settings.

Disclaimer

These manuals have been written with great care and attention to detail, and we have attempted to

cover every operational aspect of the SSL Soundscape Mixer. However, they are not contractual

documents. Solid State Logic and/or the writer(s) of this manual cannot be held responsible for any

loss or damage arising directly or indirectly from any error or omission in these manuals.

Trademarks

All trademarks are the property of their respective owners and are hereby acknowledged.

Website

The URL for the Solid State Logic website is: http://www.solid-state-logic.com/

SSL Soundscape Mixpander

The SSL Soundscape Mixpander, the absolute reference in multi-DSP effects and processing cards,

used to be the exclusive privilege of Soundscape digital audio workstation users. Connected to the

expansion port of a Soundscape 32 or compatible digital audio workstation via a proprietary bus,

the SSL Soundscape Mixpander lends its awesome power to the Soundscape system to accomplish

the most formidable mixing and processing tasks without breaking a sweat and allows multi-

channel audio streaming between the Soundscape DAW and the host PC.

Today, with the SSL Soundscape Mixpander and XLogic Alpha-Link, users of native PC-based

systems can enjoy many of the same benefits as Soundscape DAW users when recording or

mixing.

The SSL Workstation I/O solutions combine three main elements to provide, quite simply, the

ultimate digital audio solution for native PC-based systems:

- An SSL Soundscape Mixpander/9 (or Mixpander/5) multi-DSP card for mixing, effects and

processing.

- An SSL XLogic Alpha- Link audio converter.

- The associated SSL Soundscape Mixer software, based on the mixer section of the Soundscape

Editor DAW software.

Soundscape Mixpander

Page 7 of 59

Software drivers

The SSL Soundscape Mixpander comes with Low-latency MME drivers, WDM drivers, ASIO-2

drivers, DWave drivers and GSIF drivers for Windows 2000 and XP. It can be used with any PC

based MIDI+Audio sequencer, recording and editing software or other audio applications.

All SSL Soundscape native systems are truly multiclient. This means that you can share your SSL

Soundscape audio hardware between several different applications. You could for instance run

Steinberg’s Cubase or Nuendo, Sony’s ACID and Tascam’s Gigastudio simultaneously, with each

application using a predefined number of the available audio channels. You could also record the

output of Gigastudio into the audio software via the SSL Soundscape Mixer, along with external

sources… adding real-time DSP-powered effects and processing as you go along.

Digital mixing, effects and processing

The SSL Soundscape Mixer software runs on the on-board DSP-powered mixing engine of the SSL

Soundscape Mixpander . The Mixer’s architecture is the same as used for the high end Soundscape

Digital Audio Workstations, but adapted for the native environment: the “Track” inserts, which

can be placed anywhere in the Mixer, are available as audio inputs and outputs to Windows audio

applications such as MIDI+Audio sequencers or software samplers.

The included Soundscape Audio Toolbox provides some essential building blocks for commercial

standard mixes, with multi-function dynamics processors (gate, expansion, compression and

limiting), delay and delay based effects (chorus, flanger) and dither. Optional effects and

processing plug-ins are available from Solid State Logic and other world renowned developers

including Wave Mechanics, TC Electronic, Dolby Laboratories Inc., Cedar Audio, Sonic

Timeworks, Aphex Systems, Arboretum Systems, Spinaudio, Drawmer, and Acuma Labs.

DSP-based processing

PC-based mixers suffer from a certain amount of processing delay, also known as “latency”. This

may be very small on an expertly configured, modern PC, but gets worse as native effects and

processors are added in the signal path, so much so that it can be impossible to play an instrument

and monitor the output in real-time through a software mixer with a few plug-ins. This is why

most native MIDI+Audio sequencers now include a “plug-in delay compensation” feature. This

solves the problem in mixing situations, but is by its very nature unusable while recording.

In contrast, the SSL Soundscape Mixer and Soundscape format DSP-powered plug-ins offer a level

of performance on a par with high-end audio hardware in terms of sound quality and comparable

to a hardware mixing console in terms of latency (…or absence thereof!). This is a major advantage

when recording live vocals or instruments. DSP effect plug-ins can be inserted at any point in the

signal path and the wet signal can be monitored in real-time (i.e. without any annoying processing

delay) while recording the dry or wet signal, or both, into your chosen application.

Soundscape Mixpander

Page 8 of 59

When using a native MIDI+Audio sequencer in parallel with the SSL Soundscape Mixer, you can

use VST and/or DirectX (depending on your choice of sequencer) and DSP-powered effects at the

same time. In situations where the computer runs out of power, when the audio quality suffers or

the MIDI timing becomes so poor that you cannot work with it, the SSL Soundscape hardware can

take some of the work off the computer, allowing it to perform at its best and giving you the extra

power needed to complete your work.

Native effects and processing plug-ins

While Soundscape format DSP-powered effects and processing plug-ins provide a unique

combination of superior sonic quality, negligible latency and rock-solid reliability, we recognize

that native processing has a part to play. The SSL Soundscape Mixer supports the VST format. This

means that VST effect plug-ins running on the host CPU can be inserted directly in the SSL

Soundscape Mixer. This is extremely useful in situations where latency is not an issue (e.g., during

mastering) and allows access to a multitude of plug-ins.

Studio friendly!

The SSL Soundscape hardware is friendly to the rest of your studio too. You can hook up your

external effects units to the SSL Soundscape Mixer using any number of pre/post sends and insert

additional mixer strips to mix the return signal. Every element in the Mixer is in fact a plug-in that

you can place exactly where required, which means that you can record to disk through the EQs,

compressors or other effects.

If you already have a mixing console or you use the native EQs from your sequencer or audio

software, then use the power of the SSL Soundscape hardware for the cool DSP effects rather than

straightforward EQs and compressors. It's all up to you, and it means that you do not end up

paying for processing power that you do not need, as is the case with some PCI cards that offer an

inflexible mixer, with no possibility of running plug-in DSP effects from third party developers.

All settings and the entire mixer configuration can be saved and loaded from a PC file, so you

never need to lose that perfect mix you were working on yesterday!

Master Clock synchronization options

The clock reference for the SSL Mixpander is provided by the Alpha-Link AX, Alpha-Link MADI-

AX or Alpha-Link MADI-SX. These units have an on-board Master Clock generator and

WordClock input and output connectors. They can be set to operate as Clock Master, or

synchronize to external WordClock or to ADAT/AES Clock.

Soundscape Mixpander

Page 9 of 59

2. Technical Specifications

SSL Soundscape Mixpander

SSL Soundscape Mixpander/9

• Motorola 56301 80MHz DSP for Bus Master PCI interfacing and up to 36 channel full

duplex 24-bit audio streaming via 36 buses. The Multi-client SLL (Super Low Latency)

drivers are fully Bus Mastering for minimal load on the host PC.

• 8 x Motorola 56362 100MHz DSP, 6 with 384kB and 2 with 1.5MB of fast SRAM. The total

processing capability is up to 2.6 GIPS (Giga Instructions per Second).

SSL Soundscape Mixpander/5

• Motorola 56301 80MHz DSP for Bus Master PCI interfacing and up to 36 channel full

duplex 24-bit audio streaming via 36 buses. The Multi-client SLL (Super Low Latency)

drivers are fully Bus Mastering for minimal load on the host PC.

• 4 x Motorola 56362 100MHz DSP, 3 with 384kB and 1 with 1.5MB of fast SRAM. The total

processing capability is up to 1.4 GIPS (Giga Instructions per Second).

SSL Soundscape Mixpander/9 and Mixpander/5

• On board configurable 36 bus digital mixer with full 5.1 surround processing, real-time

plug-in capability and 64 inputs and outputs to and from other host PC applications via the

PCI bus and drivers.

• Expansion Bus connector on the rear bracket for connection to Alpha-Link AX, Alpha-Link

MADI-AX or Alpha-Link MADI-SX. The bi-directional bus includes WordClock and

SuperClock.

• Sample Rates: 10kHz to 96kHz, supplied via Expansion Bus.

Soundscape format DSP-powered plug-ins

Many high quality software plug-ins are available for the SSL Soundscape Mixer platform, both

from specialist third party companies and from Solid State Logic. Visit our website for further

details on available optional plug-ins for the SSL Soundscape Mixpander.

Soundscape Mixpander

Page 10 of 59

3. Installation

In order to run the SSL Soundscape Mixer software you need:

- The drivers, SSL Soundscape Mixer software, and any plug-ins you own a password for. Please

always use the latest software, downloadable from our website.

- One or more SSL Soundscape Mixpander cards.

Minimum system requirements

The minimum specifications for running the SSL Soundscape Mixer software are as follows:

• A PC running Windows 2000 or Windows XP.

• One free full length PCI expansion slot (one per card if you plan to use multiple cards).

• One free IRQ, or one IRQ that can be shared (one per card if you plan to use multiple

cards).

• Mouse, track ball, or tablet and pen.

• SVGA color monitor 800x600 resolution and 16bit graphics.

NOTE:TheSSLSoundscapeMixersoftwarerequiresacorrectinstallationofWindowsonthehost

PC.TrysomeofthesampleprogramsthatcomewithWindows. Ifyouexperienceanyproblems,try

tosorttheseoutthroughMicrosoftTechnical

SupportbeforeinstallingtheSSLSoundscapeDevice

DriverandSSLSoundscapeMixer.Itismucheasiertodealwithoneproblematatimeanditwill

bemoredifficult for usto help you if you do nothaveareliableWindowsinstallation. Also, if you

arenewtoWindows

andthePCenvironment,itwouldbeusefultospendsometimetryingoutthe

Windowsapplicationssupplied,becauseinordertousetheSSLSoundscapeMixeryouwillneedto

be familiar with normal Windows tasks such as using the menus, selecting files and directories,

usingthemouse,etc.

PC Configuration

In most cases there is no need for any special tweak to your PC configuration for Soundscape PCI

audio cards to operate effectively. However, if you encounter problems, please consider the

information in this section.

The Soundscape PCI audio cards use Motorola Farmchips for their PCI to DSP interface. They rely

on a fully compliant PCI implementation with little or no tolerance for abnormal PCI

implementations.

Soundscape Mixpander

Page 11 of 59

This makes the Soundscape platform more efficient than others, since the "native" PCI Burst Speed

can be used for an Interrupt (PCI Latency Timer set to 64), whereas other cards may use different

values like for instance 255, making them more tolerant but also making it difficult for other

devices to get CPU attention.

Generally speaking, if you are specifying a PC for Soundscape, we recommend NForce chipsets for

AMD processors and Intel chipsets for Intel processors. VIA and SIS chipsets are best avoided,

whatever your choice of processor.

Recommended BIOS settings

Parameter Recommended setting

PCI Latency Timer * 64

Spread Spectrum Clock Disable

System Speed and Overclocking (Turbo Mode) Disable or Standard

Onboard Audio/Gameport/MIDI Disable

Unused onboard devices (e.g. Serial Port/Com, LPT Printer, FW, USB) Disable

Parameter Recommended setting

PCI Latency Timer * 64

Spread Spectrum Clock Disable

System Speed and Overclocking (Turbo Mode) Disable or Standard

Onboard Audio/Gameport/MIDI Disable

Unused onboard devices (e.g. Serial Port/Com, LPT Printer, FW, USB) Disable

* If your BIOS does not allow you to set the PCI Latency value, you may use the "PCI Latency

Tool" available from http://downloads.guru3d.com/download.php?det=951

IRQ assignment

Soundscape PCI audio cards require an IRQ number to operate (this is not the case for the PCI

Host Interface card). They may share an IRQ with another device, provided that the other device is

also fully capable of sharing an IRQ. Multiple Soundscape PCI audio cards may share the same

IRQ.

On systems that use hyperthreading there is no way to assign physical IRQs to chosen PCI slots. In

ACPI mode (which is a must when using hyperthreading or dual CPU systems), the BIOS and

Windows manage all PCI devices through the PCI Interrupt Handler on IRQ 9, and only allow

IRQs higher than 15 for PCI devices, regardless of settings made in the BIOS.

Soundscape Mixpander

Page 12 of 59

Common symptoms of unsuccessful IRQ sharing may include any of the following:

- Low latency values are not possible without clicks in the audio.

- Communication error messages from the Soundscape driver/application.

- PC crashes or freezes.

- CPU Load Spikes

- Bad system performance with e.g. slow graphics or slow response, even with a low system load.

Hardware and software installation overview

For an easy installation please follow these steps in the order indicated:

1. Make sure you have the SSL Soundscape Mixpander Installation CD ready. Windows will

require the CD to find the Soundscape Device Driver files during installation. The SSL

Soundscape Mixer software, plug-in installers and plug-in demo are also included on the

CD. The most up to date versions of all these files can always be downloaded from our

website, but using the CD is the easiest way to proceed for a first installation.

2. Shut down the computer and physically install the Mixpander. Connect the Alpha-Link

unit to the Mixpander via the Expansion ports.

3. Start the computer and install the driver when prompted.

4. Install the SSL Soundscape Mixer software and any Soundscape format DSP-powered plug-

ins you own a password for and shut down the computer. (Plug-ins can also be installed at

any time later). You can also install plug-in demos at this point.

5. Switch on the XLogic Alpha-Link unit and restart the computer. The SSL Soundscape Mixer

software will start automatically and Windows will request the WDM/KS drivers. Install

them when prompted.

NOTE: Multiple SSL Soundscape Mixpanders can be installed at the same time. To install more

SSLSoundscapeMixpandercardsatalatertime,simplyrepeatsteps2.,3.and5.

.

All the steps above are described in greater detail in the following sections.

Soundscape Mixpander

Page 13 of 59

Installing the SSL Soundscape Mixpander

NOTE: The guidelines below are general and apply in most cases. However, since all PCs are

different, itis advisable to check your computer’s instruction manual for specific information. For

example, for some PCs, the front panel needs to be removed first in order the access the cover

mountingscrews.

NOTE:Ifpossible,useananti‐staticwristbandwheninstallingtheSSLSoundscapeMixpander. If

not, touch the computer casing before you touch the card, and avoid touching the circuit board or

componentsunnecessarily(althoughyouwillneedtopushtheedgeofthecircuitboardinordertofit

thecardintoaPCIslot).

1. Turn off all power to your computer, unplug it from the mains and disconnect all

peripheral devices.

2. Remove the computer cover. This usually involves removing some screws, sliding the

cover forwards or backwards, and then lifting it away from the base.

3. Position the computer so that you can easily see and access its motherboard.

4. Locate a free full length PCI expansion slot and remove the corresponding expansion slot

cover from the back of the computer. This involves removing a screw, which will be used

later to secure the card into place.

5. Grab the card by its metal backplate and place the gold-fingered edge connector directly

above the chosen PCI expansion slot on the computer’s motherboard, with the 68-pin

connector facing towards the rear panel. Gently push the card into the slot until it fits into

place. You may place your fingers on the edge of the card to push it into place without

using excessive force. Make sure the card is fully inserted into the slot before proceeding to

the next step.

6. Use the screw which held the expansion slot cover to secure the card.

7. Replace the computer cover and secure it with the screws removed in step 2.

8. Connect the Expansion Bus port on the backplate to the Expansion Bus port on the back of

the Alpha Link unit. The SSL Soundscape Mixer software will only recognize an SSL

Soundscape Mixpander if a suitable XLogic Alpha-Link unit is connected and switched on.

WARNING: The PC and Alpha-Link must be switched off when connecting the Expansion

Bus ports, otherwise damage may result.

Soundscape Mixpander

Page 14 of 59

Connecting the SSL Soundscape Mixpander to the XLogic Alpha-Link

The SSL Soundscape Mixpander features a single Expansion Bus connector (or “expansion port”):

Use the supplied Expansion Bus cable to connect the SSL Soundscape Mixpander’s Expansion Bus

port to the XLogic Alpha-Link’s Expansion Bus port:

ansion Bus connector

Soundscape Mixpander

Page 15 of 59

Installing the SSL Soundscape Device Drivers

The driver installation procedure is similar under Windows 2000 and Windows XP

Windows needs to find the “Ssdev.inf” file which is part of the Soundscape Device Driver

installation files. For the WDM/KS driver, the file is named “Sswdm.inf”.

Installing hardware drivers is in itself a Windows procedure and is described in the Windows

documentation. The installation procedure under Windows XP is described here for convenience.

WARNING: Please do not install the drivers unless your Windows installation is running

correctly (as implied in the “System Requirements” section above). Preferably, do not

attempt to install the SSL Soundscape Device Drivers if any hardware components other

than the SSL Soundscape Mixpander card(s) need drivers to be installed.

NOTE:Whe neveranewversionofthe SSLSoundscapeMixeris installed,anyolddriversthatare

detected are automatically overwrittenwith the latestones. Therefore it is normallynot possible to

usethelatestversionoftheMixerwitholddrivers.

Soundscape Mixpander

Page 16 of 59

Installing the SSL Soundscape Device Drivers under Windows XP

The SSL Soundscape Mixpander card is “Plug and play”, and is automatically detected by

Windows when the computer is started after installing the card in a PCI slot. Then a dialog box is

displayed which lets you choose between an automatic or a manual installation procedure. Select

“No, not this time” and click “Next”:

Soundscape Mixpander

Page 17 of 59

Windows will then invite you to insert the installation CD for your hardware. Insert the SSL

Soundscape Mixpander Installation CD. Windows will normally detect it automatically and find

the driver files (otherwise you will just need to click “Next” for the installation to start):

Soundscape Mixpander

Page 18 of 59

Further windows will be displayed while Windows copies the driver files. Depending on the

specificities of your system, this could take a few seconds or a few minutes.

Soundscape Mixpander

Page 19 of 59

Eventually, the dialog box below confirms that the installation has been completed. Clicking

“Finish” closes the Wizard:

Device Manager

After a successful installation, the SSL Soundscape Mixpander appears in the “SSL Soundscape

Devices” category in the Windows Device Manager:

Soundscape Mixpander

Page 20 of 59

Preparing Windows Plug and Play

If you prefer, you can also prepare the Windows Plug and Play system to recognize your SSL

Soundscape Hardware automatically.

In order to do this, before physically installing the hardware, run the SSL Soundscape Driver Setup

program (DrvSetup.exe) located in the “DRIVER” folder of the SSL Soundscape Mixpander

installation CD (or in the Ssdrvxxxx folder, where xxxx is the driver version number, if you have

downloaded the driver installation package from our website).

You can start this program in the CD navigator by clicking the “Install Driver” button:

In the SSL Soundscape Driver Setup program window, press the “UPDATE” button to copy the

driver data to your Windows installation.

Install Driver button

Page is loading ...

Solid State Logic MixPander User manual

Brand: Solid State Logic

Model: MixPander

Category: Audio cards

Type: User manual

Download PDF

report

Solid State Logic MixPander User manual

Solid State Logic MixPander User manual

Related papers

Other documents