MSI H61MA-E35 (B3) User manual

Category
Motherboards
Type
User manual
H61MA-E35 (B3)/
H61M-E21 (B3)
seres
MS-7740 (v1.x) Manboard
G52-77401X1

Preface
MS-7740
Preface
Preface
MS-7740
Preface
Copyrght Notce
The materal n ths document s the ntellectual property of MICRO-STAR INTERNA-
TIONAL. We take every care n the preparaton of ths document, but no guarantee s
gven as to the correctness of ts contents. Our products are under contnual mprove-
ment and we reserve the rght to make changes wthout notce.
Trademarks
All trademarks n ths manual are propertes of ther respectve owners.
MSI
®
s regstered trademark of Mcro-Star Int’l Co.,Ltd.
NVIDIA
®
s regstered trademark of NVIDIA Corporaton.
ATI
®
s regstered trademark of AMD Corporaton.
AMD
®
s regstered trademarks of AMD Corporaton.
Intel
®
s regstered trademarks of Intel Corporaton.
Wndows
®
s regstered trademarks of Mcrosoft Corporaton.
AMI
®
s regstered trademark of Amercan Megatrends Inc.
Award
®
s a regstered trademark of Phoenx Technologes Ltd.
Sound Blaster
®
s regstered trademark of Creatve Technology Ltd.
Realtek
®
s regstered trademark of Realtek Semconductor Corporaton.
JMcron
®
s regstered trademark of JMcron Technology Corporaton.
Netware
®
s regstered trademark of Novell, Inc.
Lucd
®
s trademark of LucdLogx Technologes, Ltd.
VIA
®
s regstered trademark of VIA Technologes, Inc.
ASMeda
®
s regstered trademark of ASMeda Technology Inc.
Pad, Phone, and Pod are trademarks of Apple Inc.
Revson Hstory
Revson Revson Hstory Date
V1.0 Frst release 2011/05
Techncal Support
If a problem arses wth your system and no soluton can be obtaned from the user’s
manual, please contact your place of purchase or local dstrbutor. Alternatvely, please
try the followng help resources for further gudance.
Vst the MSI webste for FAQ, techncal gude, BIOS updates, drver updates,
and other nformaton:
http://www.ms.com/servce/download/
Contact our techncal sta at:
http://support.ms.com/
Preface
MS-7740
Preface

Preface
MS-7740
Preface
Safety Instructons
Always read the safety nstructons carefully.
Keep ths User’s Manual for future reference.
Keep ths equpment away from humdty.
Lay ths equpment on a relable at surface before settng t up.
The openngs on the enclosure are for ar convecton hence protects the equpment
from overheatng. DO NOT COVER THE OPENINGS.
Make sure the voltage of the power source and adjust properly 110/220V before
connectng the equpment to the power nlet.
Place the power cord such a way that people can not step on t. Do not place any
-
thng over the power cord.
Always Unplug the Power Cord before nsertng any add-on card or module.
All cautons and warnngs on the equpment should be noted.
Never pour any lqud nto the openng that could damage or cause electrcal
shock.
If any of the followng stuatons arses, get the equpment checked by servce
personnel:
The power cord or plug s damaged.
Lqud has penetrated nto the equpment.
The equpment has been exposed to mosture.
The equpment does not work well or you can not get t work accordng to User’s
Manual.
The equpment has dropped and damaged.
The equpment has obvous sgn of breakage.
DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60
o
C (140
o
F),
IT MAY DAMAGE THE EQUIPMENT.
CAUTION: There s a rsk of exploson, f battery s ncorrectly replaced.
Replace only wth the same or equvalent type recommended by the manufacturer.
警告使用者:
這是甲類資訊產品,在居住的環境中使用時,可能會造成無線電干擾,在這種情況下,
使用者會被要求採取某些適當的對策。
廢電池請回收
For better envronmental protecton, waste batteres should be
collected separately for recyclng specal dsposal.
v
Preface
MS-7740
Preface
Preface
MS-7740
Preface
FCC-B Rado Frequency Interference Statement
Ths equpment has been tested and found
to comply wth the lmts for a Class B dg-
tal devce, pursuant to Part 15 of the FCC
Rules. These lmts are desgned to provde
reasonable protecton aganst harmful nter-
ference n a resdental nstallaton. Ths equpment generates, uses and can radate
rado frequency energy and, f not nstalled and used n accordance wth the nstruc-
tons, may cause harmful nterference to rado communcatons. However, there s no
guarantee that nterference wll not occur n a partcular nstallaton. If ths equpment
does cause harmful nterference to rado or televson recepton, whch can be deter-
mned by turnng the equpment o and on, the user s encouraged to try to correct the
nterference by one or more of the measures lsted below.
Reorent or relocate the recevng antenna.
Increase the separaton between the equpment and recever.
Connect the equpment nto an outlet on a crcut derent from that to whch the
recever s connected.
Consult the dealer or an experenced rado/televson techncan for help.
Notce 1
The changes or modcatons not expressly approved by the party responsble for com
-
plance could vod the user’s authorty to operate the equpment.
Notce 2
Shelded nterface cables and A.C. power cord, f any, must be used n order to comply
wth the emsson lmts.
VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.
Ths devce comples wth Part 15 of the FCC Rules. Operaton s subject to the follow
-
ng two condtons:
ths devce may not cause harmful nterference, and
ths devce must accept any nterference receved, ncludng nterference that may
cause undesred operaton.
1)
2)
Mcro-Star Internatonal
MS-7740
Preface
MS-7740
Preface
v
Preface
MS-7740
Preface
WEEE (Waste Electrcal and Electronc Equpment) Statement
ENGLISH
To protect the global envronment and as an envronmentalst, MSI must re-
mnd you that...
Under the European Unon (“EU”) Drectve on Waste Electrcal and Electron
-
c Equpment, Drectve 2002/96/EC, whch takes eect on August 13, 2005,
products of “electrcal and electronc equpment” cannot be dscarded as mu
-
ncpal wastes anymore, and manufacturers of covered electronc equpment
wll be oblgated to take back such products at the end of ther useful lfe. MSI wll com
-
ply wth the product take back requrements at the end of lfe of MSI-branded products
that are sold nto the EU. You can return these products to local collecton ponts.
DEUTSCH
Hnwes von MSI zur Erhaltung und Schutz unserer Umwelt
Gemäß der Rchtlne 2002/96/EG über Elektro- und Elektronk-Altgeräte dürfen Elek
-
tro- und Elektronk-Altgeräte ncht mehr als kommunale Abfälle entsorgt werden. MSI
hat europawet verschedene Sammel- und Recyclngunternehmen beauftragt, de n
de Europäsche Unon n Verkehr gebrachten Produkte, am Ende senes Lebenszyklus
zurückzunehmen. Btte entsorgen Se deses Produkt zum gegebenen Zetpunkt aus-
schlesslch an ener lokalen Altgerätesammelstelle n Ihrer Nähe.
FRANÇAIS
En tant qu’écologste et an de protéger l’envronnement, MSI tent à rappeler cec...
Au sujet de la drectve européenne (EU) relatve aux déchets des équpement élec
-
trques et électronques, drectve 2002/96/EC, prenant eet le 13 août 2005, que les
produts électrques et électronques ne peuvent être déposés dans les décharges ou
tout smplement ms à la poubelle. Les fabrcants de ces équpements seront oblgés de
récupérer certans produts en n de ve. MSI prendra en compte cette exgence relatve
au retour des produts en n de ve au sen de la communauté européenne. Par con-
séquent vous pouvez retourner localement ces matérels dans les ponts de collecte.
РУССКИЙ
Компания MSI предпринимает активные действия по защите окружающей среды,
поэтому напоминаем вам, что....
В соответствии с директивой Европейского Союза (ЕС) по предотвращению
загрязнения окружающей среды использованным электрическим и электронным
оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13
августа 2005 года, изделия, относящиеся к электрическому и электронному
оборудованию, не могут рассматриваться как бытовой мусор, поэтому
производители вышеперечисленного электронного оборудования обязаны
принимать его для переработки по окончании срока службы. MSI обязуется
соблюдать требования по приему продукции, проданной под маркой MSI на
территории EC, в переработку по окончании срока службы. Вы можете вернуть
эти изделия в специализированные пункты приема.
Thank you for choosng the H61MA-E35 (B3)/ H61M-E21
(B3) Seres (MS-7740 v1.X) Mcro-ATX manboard. The
H61MA-E35 (B3)/ H61M-E21 (B3) Seres manboards
are based on Intel
®
H61 (B3) chpsets for optmal system
ecency. Desgned to t the advanced Intel
®
LGA1155
processor, the H61MA-E35 (B3)/ H61M-E21 (B3) Seres
delver a hgh performance and professonal desktop
platform soluton.
Chapter 1
Gettng Started
1-2
Gettng Started
Manboard Speccatons
Processor Support
Intel
®
Core
TM
7/ Core
TM
5 /Core
TM
3/ Pentum
®
/ Celeron
®
processor n the LGA1155
package
(For the latest nformaton about CPU, please vst
http://www.ms.com/servce/cpu-support)
Chpset
Intel
®
H61 (B3) chpset
Memory Support
2 DDR3 DIMMs support DDR3 1333/ 1066 DRAM (16GB Max)
Supports Dual-Channel mode
(For more nformaton on compatble components, please vst
http://www.ms.com/servce/test-report/)
LAN
Supports LAN 10/100/1000 by Realtek
®
RTL8111E (H61MA-E35 (B3))
Supports LAN 10/100 by Realtek
®
RTL8105E (H61M-E21 (B3))
Audo
Chp ntegrated by Realtek
®
ALC887
Flexble 8-channel audo wth jack sensng
Complant wth Azala 1.0 Spec
SATA
4 SATA 3Gb/s ports by Intel
®
H61 (B3)
2 SATA 6Gb/s ports by ASMeda
®
ASM1061 (H61MA-E35 (B3))
Connectors
Back panel
1 PS/2 keyboard/mouse port
4 USB 2.0 ports
2 USB 3.0 ports (H61MA-E35 (B3))
1 HDMI port*
1 VGA port*
1 DVI-D port*
1 LAN port
6 exble audo ports (H61MA-E35 (B3))
3 exble audo ports (H61M-E21 (B3))
*(The HDMI, DVI and VGA ports only work wth Integrated Graphcs Processor)
On-Board
2 USB 2.0 connectors
1 Chasss Intruson connector
1 S/PDIF-Out connector
1 Front Panel Audo connector
1 TPM Module connector
1 Seral connector
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
1-3
MS-7740
Chapter 1
Slots
1 PCIE 2.0 x16 slot
2 PCIE 2.0 x1 slots
Form Factor
M-ATX (24.5cm X 21.5 cm)
Mountng
6 mountng holes
1-4
Gettng Started
H61MA-E35 (B3)/ H61M-E21 (B3) Seres
(MS-7740 v1.X) M-ATX Manboard
Manboard Layout
PCI _E3
PCI _E2
PCI _E1
BATT
+
JAUD1
SYSFAN
JPWR2
CPUFAN
JCI1
JBAT1
JUSB1
JCOM1
JUSB2
SA
TA
3
JFP1
DIMM1
DIMM2
JPWR
1
SA
TA
4
T:
M:
B:
Line-In
Line-Out
Mic
T:RS-Out
M:CS-Out
B:SS-Out
Top: VGA Port
Bottom: DVI-D Port
Top: LAN Jack
Bottom: USB ports
USB 3.0 ports (optional)
HDMI port
Top : mouse/
Bottom:USB ports
keyboard
JSP1
JTPM1
JUSB_PW1
SA
TA
5
(
optional)
SA
TA
6
(
optional)
SA
TA
1
SA
TA
2
(optional)
1-5
MS-7740
Chapter 1
Packng Contents
* These pctures are for reference only and may vary wthout notce.
* The packng contents may vary accordng to the model you purchased.
* If you need to purchase the optonal accessores, please vst http://www.ms.com/n
-
dex.php to nqure the part numbers or consult the dealer.
Manboard
Drver / Utlty
DVD
User Gude Back IO Sheld
M-Connector
SATA Cable
SATA Power
Cable
USB 2.0
Bracket
S/PDIF Out
Bracket
Optonal Accessores
Ths chapter provdes you wth the nformaton about
hardware setup procedures. Whle performng the nstal-
laton, be careful n holdng the components and follow-
ng the nstallaton procedures. For some components, f
you nstall n the wrong orentaton, the components wll
not work properly.
Use a grounded wrst strap before handlng computer
components. Statc electrcty may damage the compo
-
nents.
Chapter 2
Hardware Setup
2-2
Hardware Setup
MS-7740
Chapter 2
Hardware Setup
MS-7740
Chapter 2
Quck Components Gude
Back Panel,
p.2-10
CPU, p.2-4
CPUFAN, p.2-13
DDR3, p.2-7
JPWR2, p.2-9
PCIE, p.2-18
SYSFAN, p.2-13
JAUD1, p.2-14
JSP1, p.2-15
JUSB1~2, p.2-14
JFP1, p.2-13
SATA1~6, p.2-12
JPWR1, p.2-9
JBAT1, p.2-17
JCI1, p.2-12
JCOM1, p.2-15
JTPM1, p.2-16 JUSB_PW1, p.2-17
Hardware Setup
MS-7740
Chapter 2
2-3
Hardware Setup
MS-7740
Chapter 2
Screw Holes
When you nstall the manboard, you have to place the manboard nto the chasss n the
correct drecton. The locatons of screws holes on the manboard are shown as below.
Refer above pcture to nstall standos n the approprate locatons on chasss and then
screw through the manboard screw holes nto the standos.
Important
To prevent damage to the manboard, any contact between the manboard crcut and
chasss or unnecessary standos mounted on the chasss s prohbted.
Please make sure there are no metal components placed on the manboard or wthn
the chasss that may cause short crcut of the manboard.
Screw holes
The sde has to
toward the rear,
the poston for
the I/O sheld of
the chasss.
2-4
Hardware Setup
MS-7740
Chapter 2
Hardware Setup
MS-7740
Chapter 2
CPU (Central Processng Unt)
When you are nstallng the CPU, make sure to nstall the cooler to prevent overheatng.
If you do not have the CPU cooler, consult your dealer before turnng on the computer.
For the latest nformaton about CPU, please vst
http://www.ms.com/servce/cpu-support/
Important
Overheatng
Overheatng wll serously damage the CPU and system. Always make sure the coolng
fan can work properly to protect the CPU from overheatng. Make sure that you apply
an even layer of thermal paste (or thermal tape) between the CPU and the heatsnk to
enhance heat dsspaton.
Replacng the CPU
Whle replacng the CPU, always turn o the ATX power supply or unplug the power
supply’s power cord from the grounded outlet rst to ensure the safety of CPU.
Overclockng
Ths manboard s desgned to support overclockng. However, please make sure your
components are able to tolerate such abnormal settng, whle dong overclockng. Any
attempt to operate beyond product speccatons s not recommended. We do not guar
-
antee the damages or rsks caused by nadequate operaton or beyond product spec-
catons.
Introducton to LGA 1155 CPU
The surface of LGA 1155 CPU. Remember to apply some thermal paste on t for
better heat dsperson.
Algnment Key
Yellow trangle s the
Pn 1 ndcator
Algnment Key
Hardware Setup
MS-7740
Chapter 2
2-5
Hardware Setup
MS-7740
Chapter 2
CPU & Cooler Installaton
When you are nstallng the CPU, make sure the CPU has a cooler attached on the top
to prevent overheatng. Meanwhle, do not forget to apply some thermal paste on CPU
before nstallng the heat snk/cooler fan for better heat dsperson.
Follow the steps below to nstall the CPU & cooler correctly. Wrong nstallaton wll
cause the damage of your CPU & manboard.
Open the load lever. 1. Lft the load lever up to fully open
poston.
2.
After conrmng the CPU drecton for
correct matng, put down the CPU n
the socket housng frame. Be sure to
grasp on the edge of the CPU base.
Note that the algnment keys are
matched.
3. Remove the plastc cap. Engage the
load lever whle pressng down lghtly
onto the load plate.
4.
Algnment Key
Important
Vsually nspect f the CPU s seated well nto the socket. If not, take out the CPU wth
pure vertcal moton and renstall.
2-6
Hardware Setup
MS-7740
Chapter 2
Hardware Setup
MS-7740
Chapter 2
Secure the lever near the hook end
under the retenton tab.
5. Make sure the four hooks are n proper
poston before you nstall the cooler.
Algn the holes on the manboard
wth the cooler. Push down the cooler
untl ts four clps get wedged nto the
holes of the manboard.
6.
Press the four hooks down to fasten
the cooler. Turn over the manboard
to conrm that the clp-ends are
correctly nserted.
7. Fnally, attach the CPU Fan cable
to the CPU fan connector on the
manboard.
8.
Important
Conrm f your CPU cooler s rmly nstalled before turnng on your system.
Do not touch the CPU socket pns to avod damagng.
Whenever CPU s not nstalled, always protect your CPU socket pn wth the plastc
cap covered to avod damagng.
Please refer to the documentaton n the CPU cooler package for more detals about
the CPU cooler nstallaton.
Read the CPU status n BIOS.
Hardware Setup
MS-7740
Chapter 2
2-7
Hardware Setup
MS-7740
Chapter 2
Memory
These DIMM slots are used for nstallng memory modules. For more nformaton on
compatble components, please vst
http://www.ms.com/servce/test-report/
DDR3
240-pn, 1.5V
48x2=96 pn 72x2=144 pn
Memory Populaton Rule
Please refer to the followng llustratons for memory populaton rules.
Dual-Channel mode Populaton Rule
In Dual-Channel mode, the memory modules can transmt and receve data wth two
data bus lnes smultaneously. Enablng Dual-Channel mode can enhance the system
performance. The followng llustratons explan the populaton rule for Dual-Channel
mode.
1
DIMM1
DIMM2
Important
DDR3 memory modules are not nterchangeable wth DDR2, and the DDR3 standard
s not backwards compatble. You should always nstall DDR3 memory modules n
the DDR3 DIMM slots.
In Dual-Channel mode, make sure that you nstall memory modules of the
same type
and densty n derent channel DIMM slots.
To ensure a successful system boot-up, always nsert the memory modules nto the
DIMM1 rst.
Due to the chpset resource deployment, the system densty wll only be detected up
to 15+GB (not full 16GB) when each DIMM s nstalled wth a 8GB memory module.
Installed
Empty
2-8
Hardware Setup
MS-7740
Chapter 2
Hardware Setup
MS-7740
Chapter 2
Installng Memory Modules
The memory module has only one notch on the center and wll only t n the rght
orentaton.
Insert the memory module vertcally nto the DIMM slot. Then push t n untl the
golden nger on the memory module s deeply nserted n the DIMM slot. The plastc
clp at each sde of the DIMM slot wll automatcally close when the memory module
s properly seated.
Manually check f the memory module has been locked n place by the DIMM slot
clps at the sdes.
Notch
Volt
Important
You can barely see the golden nger f the memory module s properly nserted n the
DIMM slot.
1.
2.
3.
Hardware Setup
MS-7740
Chapter 2
2-9
Hardware Setup
MS-7740
Chapter 2
Power Supply
ATX 24-pn Power Connector: JPWR1
Ths connector allows you to connect an ATX 24-pn power supply. To connect the ATX
24-pn power supply, make sure the plug of the power supply s nserted n the proper
orentaton and the pns are algned. Then push down the power supply rmly nto the
connector.
You may use the 20-pn ATX power supply as you lke. If you’d lke to use the 20-pn
ATX power supply, please plug your power supply along wth pn 1 & pn 13.
13.+3.3
V
1.+3.3
V
14.-12V
2.+3.3
V
15.Ground
3
.Ground
16.PS-ON
#
4.+5
V
17.Ground
5
.Ground
18.Ground
6.+5
V
19.Ground
7
.Ground
22.+5
V
10.+12V
20.Res
8.PW
R O
K
23.+5
V
11
.+12V
21.+5
V
9.5VSB
24.Ground
12.+3.3
V
ATX 4-pn Power Connector: JPWR2
Ths connector s used to provde the power output to the CPU.
4.+12V
2
.Ground
3.+12V
1
.Ground
Important
Make sure that all the connectors are connected to proper ATX power supples to en-
sure stable operaton of the manboard.
2-10
Hardware Setup
MS-7740
Chapter 2
Hardware Setup
MS-7740
Chapter 2
Back Panel
Mouse/Keyboard
The standard PS/2
®
mouse/keyboard DIN connector s for a PS/2
®
mouse/keyboard.
USB 2.0 Port
The USB (Unversal Seral Bus) port s for attachng USB devces such as keyboard,
mouse, or other USB-compatble devces. Supports data transfer rate up to 480Mbt/s
(H-Speed).
HDMI Port
The Hgh-Denton Multmeda Interface (HDMI) s an all-dgtal audo/vdeo nterface
capable of transmttng uncompressed streams. HDMI supports all TV format, nclud
-
ng standard, enhanced, or hgh-denton vdeo, plus mult-channel dgtal audo on a
sngle cable.
VGA Port
The DB15-pn female connector s provded for montor.
DVI-D Port
The DVI-D (Dgtal Vsual Interface-Dgtal) connector allows you to connect a LCD
montor. It provdes a hgh-speed dgtal nterconnecton between the computer and ts
dsplay devce. To connect an LCD montor, smply plug your montor cable nto the DVI
connector, and make sure that the other end of the cable s properly connected to your
montor (refer to your montor manual for more nformaton.)
Important
The HDMI, VGA and DVI-D dsplay nterfaces on the manboard are desgned to serve
as IGP (Integrated Graphcs Processor) used. If you nstalled a processor wthout
ntegrated graphcs chp, these dsplay ports wll have no eect.
Mouse/
Keyboard
HDMI Port
LAN
USB 3.0 Port
(optonal)
VGA Port
USB 2.0 Port
DVI-D Port
Lne-In
Lne-Out
Mc
RS-Out
CS-Out
SS-Out
USB 2.0 Port
(optonal)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58

MSI H61MA-E35 (B3) User manual

Category
Motherboards
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI