Dell E5515H User manual

Page is loading ...

NOTE: A NOTE indicates important information that helps you make

better use of your monitor.

CAUTION: A CAUTION indicates potential damage to hardware or

loss of data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage,

personal injury, or death.

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the

written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks

of Dell Inc. Microsoft and Windows are either registered trademarks

or trademarks of Microsoft Corporation in the United States and/ or

other countries. ENERGY STAR is a registered trademark of the U.S.

Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc.

has determined that this product meets the ENERGY STAR guidelines for

energy efficiency.

Other trademarks and trade names may be used in this document to refer

to either the entities claiming the marks and names or their products.

Dell Inc. disclaims any proprietary interest in trademarks and trade names

other than its own.

2014 – 08 Rev. A00

 3

Contents

Dell Display Manager User's Guide ................6

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Using the Quick Settings Dialog . . . . . . . . . . . . . . . . 6

Setting Basic Display Functions . . . . . . . . . . . . . . . . 7

Assigning Preset Modes to Applications . . . . . . . . . . . 7

Organizing Windows with Easy Arrange . . . . . . . . . . . 9

Applying Energy Conservation Features . . . . . . . . . . .11

About Your Monitor ............................12

Package Contents . . . . . . . . . . . . . . . . . . . . . . . 12

Product Features . . . . . . . . . . . . . . . . . . . . . . . . 13

Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . 14

Inserting the batteries in the remote control. . . . . . . . . . . . . 15

Handling the remote control . . . . . . . . . . . . . . . . . . . . . . 15

Operating range of the remote control . . . . . . . . . . . . . . . . 16

Identifying Parts and Controls . . . . . . . . . . . . . . . . .17

Monitor Specifications . . . . . . . . . . . . . . . . . . . . . 19

Power Management Modes . . . . . . . . . . . . . . . . . . . . . . . 19

Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Plug and Play Capability . . . . . . . . . . . . . . . . . . . . 23

Flat-Panel Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 23

Resolution Specifications . . . . . . . . . . . . . . . . . . . . . . . . 24

Support Video Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . 24

Preset Display Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4 

Physical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . 26

Environmental Characteristics . . . . . . . . . . . . . . . . . . . . . 27

LCD Monitor Quality & Pixel Policy . . . . . . . . . . . . . 28

Maintenance Guidelines . . . . . . . . . . . . . . . . . . . 28

Caring for Your Monitor . . . . . . . . . . . . . . . . . . . . . . . . . 28

Setting Up the Monitor..........................29

Attaching the Monitor . . . . . . . . . . . . . . . . . . . . . 29

Connecting Your Monitor . . . . . . . . . . . . . . . . . . . 30

Connecting the blue VGA Cable . . . . . . . . . . . . . . . . . . . . 30

Connecting the black HDMI Cable . . . . . . . . . . . . . . . . . . . 30

Removing the Monitor Stand . . . . . . . . . . . . . . . . 32

Wall Mounting (Optional) . . . . . . . . . . . . . . . . . . . 32

Operating the Monitor ..........................34

Power On the Monitor . . . . . . . . . . . . . . . . . . . . . 34

Using the Function Controls . . . . . . . . . . . . . . . . . 34

Front-Panel Keys. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Using the On-Screen Display (OSD) Menu . . . . . . . . . 36

Accessing the Menu System . . . . . . . . . . . . . . . . . . . . . . . 36

OSD Warning Messages . . . . . . . . . . . . . . . . . . . . 47

Setting the Maximum Resolution . . . . . . . . . . . . . . 50

Troubleshooting ...............................51

Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Built-in Diagnostics. . . . . . . . . . . . . . . . . . . . . . . 53

Product-Specific Problems . . . . . . . . . . . . . . . . . . 58

Appendix ......................................59

FCC Notices (U.S. Only) and Other Regulatory Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

 5

Contact Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Setting Up Your Monitor ........................60

Setting the display resolution to 1920 x 1080 (Maximum) 60

If you have a Dell desktop or a Dell portable computer with

Internet access . . . . . . . . . . . . . . . . . . . . . . . . . 61

If you have a non Dell desktop, portable computer, or

graphics card . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Procedures for setting up dual monitors in Windows® 7 or

Windows® 8/Windows® 8.1 . . . . . . . . . . . . . . . . . 62

For Windows® 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

For Windows® 8/Windows® 8.1 . . . . . . . . . . . . . . . . . . . . 64

Setting Display Styles For Multiple Monitor . . . . . . . . . . . . . 66

6  Dell Display Manager User's Guide

Dell Display Manager User's Guide

Overview

Dell Display Manager is a Windows application used to manage a monitor

or a group of monitors. It allows manual adjustment of the displayed

image, assignment of automatic settings, energy management, image

rotation and other features on select Dell models. Once installed, Dell

Display Manager will run each time the system starts and will place its

icon in the notification tray. Information about monitors connected to the

system is always available when hovering over the notification tray icon.

E5515H

Using the Quick Settings Dialog

Clicking Dell Display Manager’s notification tray icon opens the Quick

Settings dialog box. When more than one supported Dell model is

connected to the system, a specific target monitor can be selected using

the menu provided. The Quick Settings dialog box allows convenient

adjustment of the monitor’s Brightness and Contrast levels, Preset Modes

can be manually selected or set to Auto Mode, and the screen resolution

can be changed.

E5515H

1920x1080

Dell Display Manager User's Guide  7

The Quick Settings dialog box also provides access to Dell Display

Manager’s advanced user interface which is used to adjust Basic

functions, configure Auto Mode and access other features.

Setting Basic Display Functions

A Preset Mode for the selected monitor can be manually applied using

the menu on the Basic tab. Alternatively, Auto Mode can be enabled. Auto

Mode causes your preferred Preset Mode to be applied automatically

when specific applications are active. An onscreen message momentarily

displays the current Preset Mode whenever it changes.

The selected monitor’s Brightness and Contrast can also be directly

adjusted from the Basic tab.

Assigning Preset Modes to Applications

The Auto Mode tab allows you to associate a specific Preset Mode

with a specific application, and apply it automatically. When Auto

Mode is enabled, Dell Display Manager will automatically switch to the

corresponding Preset Mode whenever the associated application is

activated. The Preset Mode assigned to a particular application may be

the same on each connected monitor, or it can vary from one monitor to

the next.

8  Dell Display Manager User's Guide

Dell Display Manager is pre-configured for many popular applications. To

add a new application to the assignment list, simply drag the application

from the desktop, Windows Start Menu or elsewhere, and drop it onto the

current list.

NOTE: Preset Mode assignments targeting batch ﬁles, scripts, and

loaders, as well as non-executable ﬁles such as zip archives or packed

ﬁles, are not supported and will be ineective.

Dell Display Manager User's Guide  9

Organizing Windows with Easy Arrange

Some Dell models feature Easy Arrange, which allows the selected

monitor’s desktop to be organized into various predefined or custom

window layouts. When Easy Arrange is enabled, windows can easily be

made to reposition and resize automatically to fill specific regions within a

window layout.

To get started with Easy Arrange, choose a target monitor and select one

of the predefined layouts. The regions for that layout will be displayed

momentarily on the monitor. Next, drag an open window across the

monitor. While the window is being dragged, the current window layout

will be displayed and an active region will be highlighted as the window

passes over it. At any time, drop the window into the active region and it

will automatically resize and reposition to fill that region.

To create a custom window layout, first size and position up to 10

windows on the desktop and then click the Save link in Easy Arrange.

The size and position of thewindows is saved as a custom layout and the

custom layout icon is created.

NOTE: The application that owns each window is not saved in the

custom layout. Only the size and position of the windows is saved.

10  Dell Display Manager User's Guide

To use the currently saved custom layout, select the custom layout icon.

To save a new custom layout, first postion and size up to 10 windows on

the desktop andthen click the Save link in Easy Arrange. To delete the

currently saved custom layout, close all windows on the desktop and then

click the Save link in Easy Arrange.

Dell Display Manager User's Guide  11

Applying Energy Conservation Features

On supported Dell models the PowerNap tab will be available to provide

energy conservation options. When the screensaver activates, the

monitor’s Brightness can automatically be set to minimum level or the

monitor can be put to sleep in order to save additional power.

12  About Your Monitor

About Your Monitor

Package Contents

Your monitor ships with all the components shown below. Ensure that

you have received all the components and Contact Dell if anything is

missing.

NOTE: Some items may be optional and may not ship with your

monitor. Some features or media may not be available in certain

countries.

•Monitor

•Monitor Base

•Screws: M4 (12mm) x 4

•Remote Control & Batteries (AAA x 2)

•Audio Cable

•Power Cable (varies by countries)

•VGA Cable

About Your Monitor  13

•Mini HDMI to HDMI Cable

•USB Upstream Cable (enable the USB

ports on the monitor)

Q70G55C170001A

G6MH8A00

G6MH8

August 2014

E5515H

•Drivers and Documentation media

•Quick Setup Guide

•Safety, Environment, and Regulatory

Information (SERI)

Product Features

The Dell E5515H flat-panel display has an active matrix, Thin-Film

Transistor, Liquid Crystal Display. The monitor’s features include:

• E5515H: 1386.84 mm (54.6 inches) diagonal viewable image size,

1920 x 1080 resolution, plus full-screen support for lower resolutions.

• LED backlight.

• Removable pedestal and Video Electronics Standards Association

(VESA) 400 mm x 400 mm mounting holes for flexible mounting

solutions.

• Plug and play capability if supported by your system.

• Connectivity : VGA, HDMIx2

• On-Screen Display (OSD) adjustments for ease of set-up and screen

optimization.

• Software and documentation media which includes an information file

(INF), Image Color Matching File (ICM), and product documentation.

• Dell Display Manager Software (comes in the CD shipped with the

monitor).

• ENERGY STAR-compliant.

• Asset Management Capability.

• Build-in Speaker (5W)x2

• RoHS compliant.

• BFR/PVC Free (Halogen-Free) monitor excluding external cables.

• Arsenic-Free glass and Mercury-Free for panel only.

• 0.5W Standby power when in the sleep mode.

14  About Your Monitor

4

Left

Press to move the selection left in

OSD menu.

5

Down

Press to move the selection down in

OSD menu.

6

Menu

Press to turn on the OSD menu.

7

Brightness -

Press to decrease the Brightness.

8

Volume -

Press to decrease the Volume.

9

MUTE

Press to turn the mute function on/

o.

10

Preset Modes

Display information about Preset

Modes.

11

Right

Press to move the selection right in

OSD menu.

12

OK

Conﬁrm an entry or selection.

13

Exit

Press to exit the Menu.

14

Brightness +

Press to increase the Brightness.

15

Volume +

Press to increase the Volume.

Remote Control

1

11

14

15

2

3

4

5

6

7

8

9

13

10

12

1

Power On/O

Switch this monitor on or o.

2

Input Source

Select input source. Press [<] or

[>] button to select from

HDMI1

,

HDMI2

or

VGA

. Press [

√

] button to

conﬁrm and exit.

3

Up

Press to move the selection up in

OSD menu.

About Your Monitor  15

Inserting the batteries in the remote control

The remote control is powered by two 1.5V AAA batteries.

To install or replace batteries:

1. Press and then slide the cover to open it.

2. Align the batteries according to the (+) and (–) indications inside the

battery compartment.

3. Replace the cover.

CAUTION:

The incorrect use of batteries can result in leaks or bursting. Be sure to

follow these instructions:

• Place “AAA” batteries matching the (+) and (–) signs on each battery to

the (+) and (–) signs of the battery compartment.

• Do not mix battery types.

• Do not combine new batteries with used ones. It causes shorter life or

leakage of batteries.

• Remove the dead batteries immediately to prevent them from liquid

leaking in the battery compartment. Don’t touch exposed battery acid,

as it can damage your skin.

• NOTE: If you do not intend to use the remote control for a long

period, remove the batteries.

Handling the remote control

• Do not subject to strong shock.

• Do not allow water or other liquid to splash the remote control. If the

remote control gets wet, wipe it dry immediately.

• Avoid exposure to heat and steam.

• Other than to install the batteries, do not open the remote control.

16  About Your Monitor

Operating range of the remote control

Point the top of the remote control toward the LCD monitor’s remote

sensor during button operation.

Use the remote control within a distance of about 8 m from remote

control sensor or at a horizontal and vertical angle of within 15° within a

distance of about 5.6 m.

NOTE: The remote control may not function properly when the

remote control sensor on the display is under direct sunlight or

strong illumination, or when there is an obstacle in the path of signal

transmission.

15 15

About Your Monitor  17

Identifying Parts and Controls

Front View

1

1 IR Lens (with LED indicator)

Back View

CAN ICES-3 (B)/NMB-3(B)

Service Tag:1NGTQV1

Express SVC code:359 576 607 7

S/N: CN-0 P2NYV-64180-46D-001T

REV A00

Manufactured Date: Jul. 2014

DELL

Model No. : E5515Hc

: 100-240V 50/60Hz 2.5A

The equipment must be connected to an earthed mains socket-outlet.

L'appareil doit être branché sur une prise de courant munie d'une mise

à la terre.

Raheen Business Park Limerick Ireland www.dell.com

Made in China

Flat Panel Monitor /Moniteur écran plat

CAN ICES-3 (B)/NMB-3(B)

Service Tag:1NGTQV1

Express SVC code:359 576 607 7

S/N: CN-0 P2NYV-64180-46D-001T

REV A00

Manufactured Date: Jul. 2014

DELL

Model No. : E5515Hc

: 100-240V 50/60Hz 2.5A

The equipment must be connected to an earthed mains socket-outlet.

L'appareil doit être branché sur une prise de courant munie d'une mise

à la terre.

Raheen Business Park Limerick Ireland www.dell.com

Made in China

Flat Panel Monitor /Moniteur écran plat

1

2

3

4

5

Back View with monitor stand

Label Description Use

1 VESA mounting holes (400

mm x 400 mm)

Wall mount monitor using VESA-

compatible wall mount kit (400 mm x

400 mm).

2 Regulatory label Lists the regulatory approvals.

3 AC power connector To connect the monitor power cable.

4 Function buttons (For more

information, see Operating

the Monitor)

Use the buttons on the back of the

monitor to adjust the image settings.

5 Security lock slot Secures monitor with security lock.

18  About Your Monitor

Side View

1

2

3

4

5

Label Description Use

1 USB downstream

port

Connect your USB device. You can only use

this connector after you have connected the

USB cable to the computer and USB upstream

connector on the monitor.

2 USB upstream port Connect the USB cable that comes with your

monitor to the computer. Once this cable is

connected, you can use the USB connectors on

the monitor.

3 Audio-Line in Connect your computer audio output with

audio cable.

4 VGA connector Connect your computer to the monitor using a

VGA cable.

5 HDMI 1/HDMI 2 Connect your HDMI devices with HDMI cable.

Bottom View

1 1

1 Speakers

About Your Monitor  19

Monitor Specifications

The following sections give you information about the various power

management modes and pin assignments for the various connectors of

your monitor.

Power Management Modes

If you have VESA’s DPM compliance display card or software installed

in your PC, the monitor automatically reduces its power consumption

when not in use. This is referred to as Power Save Mode. If the computer

detects input from keyboard, mouse, or other input devices, the monitor

automatically resumes functioning. The following table shows the power

consumption and signaling of this automatic power saving feature:

VESA

Modes

Horizontal

Sync

Vertical

Sync

Video

Power

Indicator

Power

Consumption

Normal

operation

Active Active Active White 135 W (Maximum)**

65 W (Typical)***

Active-o

mode

Inactive Inactive Blank Glowing

white

Less than 0.5 W

Switch o - - O Less than 0.5 W*

* Zero-power consumption in OFF mode can only be achieved by

disconnecting the main cable from the monitor.

** Maximum power consumption with max luminance and contrast.

*** Typical power consumption with OSD default setting, audio and USB

inactive.

The OSD will only function in the normal operation mode. When any

button except power button is pressed in Active-off mode, the following

messages will be displayed:

Dell

E5515H

There is no signal coming from your computer. Press any key on the

keyboard or move the mouse to wake it up. If there is no display, press

the monitor button now to select the correct input source on the

On-Screen-Display menu.

20  About Your Monitor

Activate the computer and monitor to gain access to the Using the On-

Screen Display (OSD) Menu.

NOTE: The Dell E5515H monitor is ENERGY STAR®-compliant.

Pin Assignments

15-pin D-Sub connector

1 2 3 4 5

6 7 8 9 10

11 12 13 14 15

Pin Number Monitor Side of the 15-pin Side Signal Cable

1 Video-Red

2 Video-Green

3 Video-Blue

4 GND

5 Self-test

6 GND-R

7 GND-G

8 GND-B

9 DDC +5 V

10 GND-sync

11 GND

12 DDC data

13 H-sync

14 V-sync

15 DDC clock

About Your Monitor  21

19-pin HDMI connector

Pin Number Monitor Side of the 19-pin Side Signal Cable

1 TMDS Data2+

2 TMDS Data2 Shield

3 TMDS Data2-

4 TMDS Data1+

5 TMDS Data1 Shield

6 TMDS Data1-

7 TMDS Data0+

8 TMDS Data0 Shield

9 TMDS Data0-

10 TMDS Clock+

11 TMDS Clock Shield

12 TMDS Clock-

13 CEC

14 Reserved (N.C. on device)

15 SCL

16 SDA

17 DDC/CEC Ground

18 +5V Power

19 Hot Plug Detect

Page is loading ...

Dell E5515H User manual

Dell E5515H User manual

Related papers

Other documents