ANGLE ADJUSTMENT:
Adjust light angle by rotating the light unit forward or backward.
BATTERY INSERTION / REPLACEMENT INSTRUCTIONS:
1. To remove battery cap, twist cap counter-clockwise to the unlock position.
2. Insert batteries according to the orientation markings on the inside of the battery cavity.
3. Reattach battery cap by aligning the white mark on the cap with unlock logo on the casing.
Twist cap clockwise to the lock position.
Step 1 Step 3 Step 2
Energizer
®
Triple Beam LED Headlight
Instruction Sheet
HEADBAND INSERTION:
Step 1 Step 2 Step 3
1. Thread headband through the back of the left slot.
2. Pull headband across the bracket. (The solid side of the strap should be facing outward.)
3. Thread headband through the front of the right slot.
Energizer
®
Triple Beam LED Headlight
Instruction Sheet
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
GSM Outdoors CYC-RL3W Datasheet
-
Advanced Bionics Neptune Owner's manual
-
Antra AH6-660-6217 User manual
-
Centurion max respiratory helmets User manual
-
Plantronics CS500 XD Series User manual
-
NightStick XPP-5452G User manual
-
Telex Airman 8 User manual
-
Gentex PUREFLO PURELITE XSTREAM User manual
-
Plantronics CS500 Series Owner's manual
-
Trend AIRPRO MAX User Instructions
