TEAC’s complete line of SD Tow er Duplicators easily and
accurately duplicate SD cards without the need for a computer.
Advanced Asynchronous Duplication Mode allows each
channel to operate independently so there is no need to wait for
duplication to start or finish at the same time.
Unique Source Analysis Function analyzes the content on
the master and intelligently copies only the data to speed up
copy time.
© 2010 TEAC AMERICA, INC. All rights reserved. All trademarks and registered trademarks mentioned herein are the property of their respective companies.
TEAC AMERICA, INC., 7733 Telegraph Road, Montebello, CA 90640 • phone 323.727-4859 • fax 323.727.7652 • email discpublishing@teac.com
www.teac.com/DSPD
DSPD-88633/5-10/pdf
Secure Digital (SD)
Tower Duplicators
Product Specifications
Model: 1:3: SDDUPLICATOR/3
1:7: SDDUPLICATOR/7
1:11: SDDUPLICATOR/11
1:15: SDDUPLICATOR/15
1:23: SDDUPLICATOR/23
Operating Type: Standalone (No PC Required)
Number of Targets: 3, 7, 11, 15 and 23
Supported Media: Secure Digital (SD)
Transfer Speeds: Up to 600 MB/min
Copy Mode: Synchronous or Asynchronous
LCD Display: 1x16 Backlit
Power Requirements: 115 V OR 230 V
S D Tower Duplicators
• Standalone solution, no computer required.
• 1:3, 1:7, 1:11, 1:15 and 1:23 configurations.
• Supports Synchronous and Asynchronous
duplicating modes.
• No warm-up and cool-down required.
• User-friendly interface and simple operation.
• Real-time display of detailed information on
LCD screen.
• Supports all file formats, file, size and card/drive
capacities.
• High-speed copy up to 10 MB / sec.
• Copy and compare function ensures successful
and accurate copy.
• Unique Source Analysis function.
Copies up to
10MB/sec
600MB/min
Become a
TEAC "FAN" today:
www.facebook.com/teac.us
/
