Dell 858-BBBE User manual

Regulatory model: E2014Tt

User’s Guide

Dell E2014T

NOTE: A NOTE indicates important information that helps you make better

use of your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of

data if instructions are not followed.

WARNING: A WARNING indicates a potential for property damage, personal

injury, or death.

Information in this document is subject to change without notice.Reproduction of these

materials in any manner whatsoever without the written permission of Dell Inc. is strictly

forbidden. Trademarks used in this text: Dell™, the DELL logo are trademarks of Dell Inc.;

Microsoft

®

, Windows

®

, and the Windows start button logo are either trademarks or registered

trademarks of Microsoft Corporation in the United States and/or other countries; Other

trademarks and trade names may be used in this document to refer to either the entities

claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in

trademarks and trade names other than its own.

2014 – 03 Rev. A02

 3

Contents

About Your Monitor .............................5

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Plug-and-Play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

LCD Monitor Quality and Pixel Policy. . . . . . . . . . . . . . . . 17

Maintenance Guidelines. . . . . . . . . . . . . . . . . . . . . . . . 17

Setting Up the Monitor..........................18

Attaching the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Connecting Your Monitor. . . . . . . . . . . . . . . . . . . . . . .19

Organizing Cables . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Removing the Stand . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Wall Mounting (Optional) . . . . . . . . . . . . . . . . . . . . . . . 21

Operating the Monitor ..........................22

Side-Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Using the On-Screen Display (OSD) Menu . . . . . . . . . . . . .24

Setting the Maximum Resolution . . . . . . . . . . . . . . . . . . 35

Tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Troubleshooting ...............................36

Self-Test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Common Problems. . . . . . . . . . . . . . . . . . . . . . . . . . .39

Touchscreen Problems . . . . . . . . . . . . . . . . . . . . . . . . 42

Product Specific Problems . . . . . . . . . . . . . . . . . . . . . . 43

Universal Serial Bus (USB) Specific Problems . . . . . . . . . . . 44

4  About Your Monitor

Appendix ......................................45

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

FCC Notices (U.S. only) and Other Regulatory Information . . 45

Contacting Dell . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Setting Display Resolution to 1600x900 (maximum) . . . . . .46

Downloading Latest Video Drivers . . . . . . . . . . . . . . . . . 46

Setting up Dual Monitors . . . . . . . . . . . . . . . . . . . . . . . 47

Display Styles For Multiple Monitors . . . . . . . . . . . . . . . . 52

About Your Monitor  5

About Your Monitor

Package Contents

Your monitor ships with the components shown below. Make sure that you have

received all the components and contact Dell if something is missing.

NOTE: Some items may be optional and may not ship with your monitor.

Some features or media may not be available in certain countries.

NOTE: To set up with any other stand, see the documentation for the stand.

Monitor

Stand

Power cable (varies by country)

HDMI cable

6  About Your Monitor

USB cable (enables touch screen

function on the monitor)

Screen cleaning cloth

Velcro strap

• Quick Setup Guide

• Drivers and Documentation Media

• Product and Safety Information

Guide

About Your Monitor  7

Features

Your monitor features the following:

• 49.41 cm (19.5 inch) diagonal display area.

• Resolution of 1600 x 900.

• Tilt adjustment (5.5 degrees up and 31 degrees down).

• Removable stand.

• 100 mm x 100 mm Video Electronics Standards Association (VESA) compliant

mounting holes.

• Plug-and-play support.

• On-Screen Display (OSD) controls for easy setup and screen optimization.

• Security cable slot.

• Stand lock.

• INF ﬁle, Image and color matching (ICM) ﬁle, Dell Display Manager software, and

product documentation included in the media shipped with your monitor.

• Asset management capability.

• Energy Star compliant.

• EPEAT Gold compliant.

• BFR/PVC-reduced.

• Arsenic-free glass and mercury-free panel.

• Real-time energy gauge to check the energy being used by the monitor.

• TCO certiﬁed.

8  About Your Monitor

Parts and Controls

Front View ew Side-panel controls

Label Description

1 Function buttons (For more information, see Operating the Monitor)

2 Power On/O button (with indicator light)

Back View

Label Description Use

1

100 mm x 100 mm

VESA mounting holes

(under VESA cover)

Wall mount monitor using

100 mm x 100 mm VESA-compatible

wall-mount kit.

2 Regulatory label Lists the regulatory approvals.

3

Stand release button Releases the stand from the monitor.

About Your Monitor  9

4

Barcode serial

number label

Refer to this label if you need to

contact Dell for technical support.

5

Dell soundbar

mounting slots

Attaches the Dell Soundbar (optional).

6

Cable management

slot

Organize cables by placing them through the slot.

Side View

Bottom View

Label Description Use

1 Stand lock

Use a M3 x 6 mm screw to lock the stand to the

monitor. (screw not included)

2 AC power cord port Connect the power cable.

3 DisplayPort port

Connect a DisplayPort cable from your computer to

the monitor.

4 HDMI (MHL)1 port

Connect your computer with HDMI cable or

portable device with MHL cable (optional).

5 HDMI (MHL)2 port

Connect your computer with HDMI cable or

portable device with MHL cable (optional).

6 VGA port

To connect your computer to the monitor using a

VGA cable (optional).

10  About Your Monitor

7 Audio line-out port

Connect speakers to playback audio coming

through HDMI or DisplayPort audio channels.

Only supports 2-channel audio.

NOTE: The audio line-out port does not support

headphones.

8 USB upstream port

Connect the USB cable from the monitor to the

computer to allow you to use the USB ports and

touch screen function on the monitor.

9

USB 2.0 downstream

ports

Connect your USB device. You must connect the

USB upstream cable to your monitor and computer

before you can use these ports.

10

Security cable slot

Use a security cable to prevent unauthorized

removal of the monitor. (security cable sold

separately)

Specifications

Panel

Screen type Active matrix - TFT LCD

Panel type TN

Viewable image

Diagonal

Horizontal Active Area

Vertical Active Area

Area

49.41 cm (19.5 inches)

432.00 mm (17.01 inches)

239.76 mm (9.44 inches)

103576.32 mm

2

(160.54 inch

2

)

Pixel pitch 0.27 mm (H) x 0.27 mm (W)

Viewing angle

Horizontal

Vertical

170 degrees (typical)

160 degrees (typical)

Luminance

Panel

Monitor

250 cd/m

2

(typical)

225 cd/m

2

(typical)

Contrast ratio 1000:1 (typical)

Dynamic contrast ratio 8,000,000 : 1

Faceplate coating Anti-glare with hard coating 3H

Bezel gloss 3~5 gloss units

Touch glass gloss >30 gloss units

NOTE: The user should consider the placement of

the display as the reﬂection of surrounding light and

bright surfaces from the glass may cause

disturbances to users.

Backlight LED edgelight system

About Your Monitor  11

Response time 2 ms (with overdrive)

Color depth 16.77 million colors

Color gamut (typical)

72% (CIE1976)

NOTE: Color gamut (typical) is based on CIE1976

(72%) and CIE1931 (72%) test standards.

Touch

Type Infrared Optical System

Panel diagonal 19.5”

Panel thickness 6.5 ± 0.3 mm

Active area Extended beyond viewing area

Cover glass thickness 3.0 +0.0/-0.3 mm

Input method Bare ﬁnger, thin gloves, conductive stylus

Touch point 5 touch-points

Output position resolution 32767 x 32767

Touch method Fingers and thin gloves

Operating system Windows 8 certiﬁed

NOTE: When the monitor is in Sleep mode, move the mouse, press any key on

the keyboard, or double-tap firmly on the screen to wake up the monitor.

Resolution

Horizontal scan range 30 kHz to 83 kHz (automatic)

Vertical scan range 56 Hz to 75 Hz (automatic)

Maximum resolution 1600 x 900 at 60 Hz

Video display capabilities 480p, 576p, 720p, 1080p, and 1080i

Electrical

Video input signals DisplayPort 1.2 / HDMI / MHL / VGA

Synchronization input signals

• Separate horizontal and vertical

synchronizations.

• Polarity-free TTL level

• SOG (composite SYNC on green)

AC input voltage 100 VAC to 240 VAC

Frequency 50 Hz or 60 Hz + 3 Hz

Current 1.5 A (Max.)

Inrush current

120 V:70 A (Max.)

240 V:150 A (Max.)

12  About Your Monitor

Environmental Characteristics

Temperature

Operating 0 °C to 40 °C (32 °F to 104 °F)

Non-operating -20 °C to 60 °C (-4 °F to 140 °F)

Humidity

Operating 10% to 80% (non-condensing)

Non-operating 5% to 90% (non-condensing)

Altitude

Operating 5,000 m (16,400 ft) max

Non-operating 12,191 m (40,000 ft) max

Thermal dissipation

136.49 BTU/hour (maximum)

54.59 BTU/hour (typical)

Preset Display Modes

Display Mode

Horizontal

Frequency (kHz)

Vertical

Frequency

(Hz)

Pixel Clock

(MHz)

Sync Polarity

(Horizontal/

Vertical)

720 x 400

31.5

70.0

28.3

-/+

640 x 480

31.5

60.0

25.2

-/-

640 x 480 37.5 75.0 31.5 -/-

800 x 600

37.9

60.0

40.0

+/+

800 x 600

46.9

75.0

49.5

+/+

1024 x 768 48.4 60.0 65.0 -/-

1024 x 768

60.0

75.0

78.8

+/+

1152 x 864

67.5

75.0

108.0

+/+

1280 x 1024 64.0 60.0 108.0 +/+

1280 x 1024

80.0

75.0

135.0

+/+

1600 x 900

60.0

97.8

+/-

Physical Characteristics

Connector type

DisplayPort

One DisplayPort 1.2 port

Maximum resolution: 1600 x 900

HDMI

Two HDMI/MHL ports

Maximum resolution: 1600 x 900

VGA

One VGA port

Maximum resolution: 1600 x 900

About Your Monitor  13

USB

One USB 2.0 upstream port

Two USB 2.0 downstream ports

Audio One audio-out port

Signal cable type

• D-Sub

• HDMI

• MHL

• DisplayPort

• USB2.0

Dimensions (with stand)

Height 376.0 mm (14.80 inches)

Width 505.9 mm (19.92 inches)

Depth 165.0 mm (6.50 inches)

Dimensions (without stand)

Height 311.2 mm (12.25 inches)

Width 505.9 mm (19.92 inches)

Depth 51.7 mm (2.04 inches)

Stand dimensions

Height 289.8 mm (11.41 inches)

Width 180.0 mm (7.09 inches)

Depth 165.0 mm (6.50 inches)

Weight

Weight with packaging 6.07 kg (13.35 lb)

Weight with stand assembly

and cables

4.89 kg (10.76 lb)

Weight without stand

assembly

(For wall mount or VESA

mount considerations - no

cables)

3.43 kg (7.55 lb)

Weight of stand assembly 1.08 kg (2.38 lb)

Power Management Modes

If you have VESA’s DPM™ compliance display card or software installed in your PC,

the monitor can automatically reduce its power consumption when not in use. This

is referred to as Power Save Mode. If the computer detects input from keyboard,

mouse, or other input devices, the monitor automatically resumes functioning. The

following table shows the power consumption and signaling of Power Save Mode:

14  About Your Monitor

VESA

Modes

Horizontal

Sync

Vertical

Sync

Video Power Indicator Power Consumption

Normal

operation

Active Active Active White 16 W (typical)

40 W (maximum)

Active-o

mode

Inactive

Inactive Blank

Brething white

Less than 0.5 W

Switch o

-

- -

O Less than 0.5 W

NOTE: This monitor is ENERGY STAR

®

-compliant.

NOTE: Zero power consumption in OFF mode can only be achieved by

disconnecting the power cable from the monitor.

The OSD functions only in the normal operation mode. If you press any button is

pressed in Active-o mode, the following message is displayed:

About Your Monitor  15

Pin Assignments

VGA

Number

15-pin Side of the

Connected Signal Cable

Number

15-pin Side of the

Connected Signal Cable

1 Video-Red 9 Computer 5 V/3.3 V

2 Video-Green 10 GND-sync

3 Video-Blue 11 GND

4 GND 12 DDC data

5 Self-test 13 H-sync

6 GND-R 14 V-sync

7 GND-G 15 DDC clock

8 GND-B

HDMI

Number

19-pin Side of the monitor

connector

Number

19-pin Side of the monitor

connector

1 TMDS Data 2+ 11 TMDS Clock Shield

2 TMDS Data 2 Shield 12 TMDS Clock-

3 TMDS Data 2- 13 Floating

4 TMDS Data 1+ 14 Floating

5 TMDS Data 1 Shield 15 DDC Clock (SDA)

6 TMDS Data 1- 16 DDC Data (SDA)

7 TMDS Data 0+ 17 Ground

8 TMDS Data 0 Shield 18 +5 V Power

9 TMDS Data 0- 19 Hot plug detect

10 TMDS Clock

16  About Your Monitor

DisplayPort

Pin Number

20-pin Side of the monitor

connector

Pin Number

20-pin Side of the monitor

connector

1 ML0 (p) 11 GND

2 GND 12 ML3 (n)

3 ML0 (n) 13 GND

4 ML1 (p) 14 GND

5 GND 15 AUX (p)

6 ML1 (n) 16 GND

7 ML2 (p) 17 AUX (n)

8 GND 18 HPD

9 ML2 (n) 19 DP_PWR Return

10 ML3 (p) 20 +3.3 V DP_PWR

Universal Serial Bus (USB)

This section gives you information about the USB ports available on your monitor.

Your computer has the following USB ports:

•1 upstream

•2 downstream

NOTE: The USB ports on this monitor are USB 2.0 compliant.

Transfer speed Data Rate Power Consumption

Hi-Speed 480 Mbps 2.5 W each port (maximum)

Full speed 12 Mbps 2.5 W each port (maximum)

USB Upstream port USB Downstream port

About Your Monitor  17

Number

Signal

name

1 DMU

2 VCC

3 DPU

4 GND

Number

Signal

name

1 VCC

2 DMD

3 DPD

4 GND

NOTE: USB 2.0 functionality requires a USB 2.0-capable computer.

NOTE: The monitor’s USB ports work only when the monitor is on or in the

power save mode. If you turn o the monitor and then turn it on, the attached

peripherals may take a few seconds to resume normal functionality.

Plug-and-Play

You can install the monitor in any Plug-and-Play-compatible computer. The

monitor automatically provides its Extended Display Identiﬁcation Data (EDID) to the

computer using Display Data Channel (DDC) protocols so the system can conﬁgure

itself and optimize the monitor settings. Most monitor installations are automatic;

you can select dierent settings if desired. For more information about changing the

monitor settings,see Operating the Monitor.

LCD Monitor Quality and Pixel Policy

During the LCD Monitor manufacturing process, it is not uncommon for one or

more pixels to become ﬁxed in an unchanging state. These are hard to see and

do not aect the display quality or usability. For more information on Dell Monitor

Quality and Pixel Policy, see dell.com/support/monitors.

Maintenance Guidelines

Cleaning Your Monitor

WARNING: Read and follow the safety instructions before cleaning the

monitor.

WARNING: Before cleaning the monitor, unplug the monitor power cable

from the electrical outlet.

For best practices, follow these instructions while unpacking, cleaning, or handling

your monitor:

• To clean your screen, use a soft, clean cloth lightly dampened with water. You

can also use special screen-cleaning tissue or solution suitable for the antistatic

coating. To avoid using detergent of any kind as some detergents leave a milky

ﬁlm on the monitor, use a lightly-dampened, warm cloth to clean the monitor.

18  Setting Up the Monitor

CAUTION: Do not use benzene, thinner, ammonia, abrasive cleaners, or

compressed air.

• Use a lightly-dampened, warm cloth to clean the monitor. Avoid using detergent

of any kind as some detergents leave a milky film on the monitor.

• Ifyounoticewhitepowderwhenyouunpackyourmonitor,wipeitowithasoft

and clean cloth.

• Handleyourmonitorwithcaretoavoidscratchesandscumarks.

• Tohelpmaintainthebestimagequalityonyourmonitor,useadynamically

changing screen saver and turn o your monitor when not in use.

Setting Up the Monitor

Attaching the Stand

NOTE: The stand is detached from monitor when it is shipped from the

factory.

NOTE: If you purchased a dierent stand for your monitor, see the

documentation for that stand for setup instructions.

To attach the monitor stand:

1. Place the monitor on a ﬂat surface.

2. Insert the two tabs on the upper part of the stand to the groove in the back

of the monitor.

3. Press-down on the stand till it snaps into its place.

Setting Up the Monitor  19

Connecting Your Monitor

WARNING: Follow the Safety Instructions before you perform any of the

procedures in this section,

To connect your monitor to the computer:

1. Turn o your computer anddisconnect the power cable from the wall outlet.

2. Connect the USB cable and only one of the following display cables to your

computer:

VGA cable,

DisplayPort cable, or

HDMI cable

NOTE: Do not connect multiple display cables to the same computer.

Connecting the VGA Cable

Connecting the DisplayPort Cable

Connecting the HDMI Cable

20  Setting Up the Monitor

Connecting the USB Cable

NOTE: The graphics are used for the purpose of illustration only. Appearance

of the computer may vary.

Organizing Cables

After you connect all necessary cables to your monitor and computer, use the

cable-management slot toorganize the cables.

Removing the Stand

NOTE: To avoid scratching on the LCD screen while removing the

stand,make sure that the monitor is placed on a clean surface.

NOTE: If you purchased a dierent stand for your monitor, see the

documentation for that stand for setup instructions.

Page is loading ...

Dell 858-BBBE User manual

This manual is also suitable for

Dell 858-BBBE User manual

Related papers

Other documents