BakkerElkhuizen UltraStand User manual

  • Hello! I am an AI chatbot trained to assist you with the BakkerElkhuizen UltraStand User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Work Smart - Feel Good
UltraStand
Notebook stand
1
2
3
4
6
5
www.bakkerelkhuizen.com
1 Lay your laptop with the bottom facing
up and the front facing you.
2 Carefully remove the cover sheet from
the UltraStand.
3 Ensure that the UltraStand is facing
you with the adjusting tongue pointing
towards you.
4 Attach the UltraStand to the laptop
using the reference points that
correspond with the rear legs of your
laptop.
5 Rub the sticky sheet on the sides with
your ngertips (not your ngernails)
and press the sticky pad down rmly in
the middle. Ensure that the UltraStand
lines up properly everywhere.
6 After 24 hours, the bond is at full
strength and the UltraStand is ready
for use.
Keep the cover sheet. You can stick the
UltraStand to this, when you temporarily remove
it to service your laptop. Exposing the UltraStand
to the air must be kept to a minimum to prevent
drying out.
Go to www.bakkerelkhuizen.com/ultrastand for
a video instruction for attaching and detaching
the UltraStand.
WARNI NG:
After removing the cover sheet
from the UltraStand laptop holder,
immediately attach it to your laptop!
First ensure that the back of the
laptop is clean and grease-free (using,
for example, a screen cloth).
24h
/