Unbranded 750C-W Installation guide

Hello! I have reviewed the installation instructions for the AIREX E-FLEX GUARD Insulation Protector and TITAN Outlet HVAC Wall Penetration Seal. This document details the steps for proper installation, including measuring, wrapping, and securing the products. I am ready to answer any questions you have about these products or their installation process.
How do I prepare the E-FLEX GUARD for installation?

How should I wrap the E-FLEX GUARD around the line-set?

How to secure flexible elastomeric sleeve?

Installation Instructions

72170 Dunham Way, Suite D | Thousand Palms, CA 92276 | (760) 343-2277 | FAX (760) 343-5599 | www.airexmfg.com

Exterior

Wall

Wrap E-FLEX GUARDTM Insulation Protector around line-set making sure

pre-loaded Velcro fasteners are fully enclosed. Ensure seam faces toward

the bottom for improved aesthetics.

Measure line-set from Condensing Unit to wall outlet and cut E-FLEX GUARDTM to length.

Secure around flexible elastomeric sleeve

with enclosed stainless steel hose clamp.

Tighten for proper seal and security.

Secure with cable ties (provided).

Condensing Unit

E-FLEX GUARDTM

Insulation Protector

E-FLEX GUARDTM

Insulation Protector

TITAN OutletTM

Illustrated Code Compliant Installation

(Recommended

Installation

view as shown)

Protects Piping Insulation

HVAC Wall Penetration Seal