WilTec 61542 Operating instructions

Category
Vacuum cleaner supplies
Type
Operating instructions

WilTec 61542: Your Versatile Cleaning Companion

The WilTec 61542 is a powerful wet and dry vacuum cleaner designed for both household and commercial use. With its robust construction and a variety of attachments, it effortlessly tackles both wet and dry messes, making it an ideal choice for cleaning carpets, floors, cars, and even clogged sinks. The automatic type features a convenient self-draining function, while the manual type offers precise control over suction power.

WilTec 61542: Your Versatile Cleaning Companion

The WilTec 61542 is a powerful wet and dry vacuum cleaner designed for both household and commercial use. With its robust construction and a variety of attachments, it effortlessly tackles both wet and dry messes, making it an ideal choice for cleaning carpets, floors, cars, and even clogged sinks. The automatic type features a convenient self-draining function, while the manual type offers precise control over suction power.

Operation Manual
Wet & Dry Vacuum Cleaner - 61542
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ
insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH Seite 10
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
The information contained in this document is subject to change without prior notice. No part of this
document can be copied or duplicated in another form without the prior written consent of WilTec
Wildanger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in
this user manual or the connection diagram.
Although WilTec Wildanger Technik GmbH has made every effort to make sure that this user manual
is complete, accurate and updated, errors cannot always be avoided. In the event of problems with
this user manual please complete and send this form back to us.
FAX-notification (+++49 2403 55592-15),
from: ________________________________________
Name: ________________
Firm:_____________________
Tel/Fax:__________________
I would like to report the following mistakes:
_______________________________ ____________________________________
Customer Service WilTec Wildanger Technik GmbH
Tel:++ +49 2403 55592-0
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury by means of fire or
electric shock we urge that our clients take some basic safety precautions when using this
device. Please read the operation instructions carefully and make sure you have understood its
content.
Always use a grounded power connection with the appropriate mains voltage. You can
nd the corresponding mains voltage on the type plate. If you have any doubts about the
connection being grounded, have it checked by a qualied professional. Never use a
faulty electric cable.
Do not inspect the electrical part of the pressure pond lter in a wet or damp
environment or when you are wet yourself and protect it from direct sunlight. Install this
device in a safe location so that nobody can step on the cable, fall over or damage it.
Disconnect the power plug before cleaning it and use only a damp cloth for cleaning.
Avoid using cleaning agents and make sure that no liquid enters the electrical part of the pump.
The electric part of the device contains no parts that can be inspected or serviced by the user. Leave
the maintenance, adjustment and repair to qualified technical personnel. In case of unauthorised
intervention the 2-year warranty is no longer valid! Keep these operation instructions safe.
© by WilTec Wildanger Technik GmbH Seite 11
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Content
General Safety Instructions
Brief Description, Product Parameters
Main Components of Automatic Type
Introduction to Operation of Automatic Type
Fault Solution
© by WilTec Wildanger Technik GmbH Seite 12
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
General Safety Instructions
Please check whether the local supply voltage meets the voltage value indicated on the product or
not before first use.
And check carrying capacity of power supply.
This operation manual provides detailed information on the function and correct use instruction of
this cleaner, please read this manual carefully for the safety of user and machine.
Keep it away from children or person without self-care ability.
Keep the machine away from the place of high temperature or fire and keep it away from the place
where the machine is easy to slip, tilt or turn on its side near the pool when the machine is in use.
When the machine has a fault, please do not dismantle the machine privately, but send to the for-
mal repair point for repair.
Please do not use in the rain.
Thank you for choosing our wet and dry vacuum cleaner.
Brief Description
The machine has two designs of automatic type and manual type, which are advanced in simple oper-
ation and convenient carrying. The machine of automatic type will automatically draw and drain water
after started. The water drawing time is 30s, and water draining time is 35s; the power switch of the
manual type is manually controlled, a safety valve will block off the air inlet of the motor after the ma-
chine fully draws water. The vacuum degree of the machine is zero at this time, the power switch will
be manually turned off. A one-way valve of a water outlet pipe will be automatically opened to start to
drain water, and the power supply will be turned on again to start the motor to work repeatedly after
the water is completely drained.
© by WilTec Wildanger Technik GmbH Seite 13
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Technical Data
Type Voltage Frequency Power
Wet & dry vacuum cleaner AC 220-240V 50/60Hz 1400W
© by WilTec Wildanger Technik GmbH Seite 14
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Main components of automatic type
No. Name
1 Plastic-Foursection Pipe
2 Automatic Control Machine
3 Filter Sponge
4 Flat Nozzle
5 Non-woven Bag
6 Suction Hose of Automatic Control Machine
7 Water Outlet Pipe
8 Hand Nozzle
© by WilTec Wildanger Technik GmbH Seite 15
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Introduction to Operation of Automatic Type
Main components of automatic type
1) Check whether the machine package is damaged or not after receiving the product, then open and
take out the machine, and assemble as shown in the figure.
2) Please note, check two ends of the pipe while assemble the water outlet pipe, and connect the
side without a rubber sheet inside with the complete machine.
3) The connecting mode of automatic control suction pipe is as shown in figure 1.
4) The bag assembly mode and position are as shown in figure 2.
5) The filter sponge assembly mode and position are as shown in figure 4.
6) Press the switch button, extend the hose and hand nozzle to the pool for suction.
7) After finishing suction, turn off the power switch, and pull out the plug. Dismantle the connecting
pipe and hose, and place the flat suction and hand nozzle on the accessory socket of the machine
head as shown in figure 3.
8) Wash the bag and filter sponge with water while cleaning the complete machine.
© by WilTec Wildanger Technik GmbH Seite 16
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Fault Solution
Fault Possible Cause Treatment method
Motor has fault
of rotation
1. Check whether the power plug is firmly in-
serted in the socket or not.
Insert the plug in the socket
again and guarantee the power
socket to be on.
2. Check whether the power switch of the
cleaner is turned on or not.
Turn on the power switch.
3. Check whether a small plug on the hose is
inserted in the socket above the machine head
or not. Turn on the power switch on the hose
handle (only for the manual control type).
Insert the small plug and turn
on the power switch on the
hose handle.
Suction is
weakened
1. Check whether the nozzle, hose and con-
necting pipe are blocked or not.
Remove blockage in time.
2. Check whether the dirt and dust bag is full or
not.
Discard dirt and dust.
3. Check whether the filter sponge and bag are
blocked or not.
Wash the filter sponge and bag.
4. Check whether the connecting pipe is con-
nected well or not.
Install the connecting pipe
again.
5. Check whether the handle air volume switch
is fully turned on or not.
Turn off the air volume switch
button.
© by WilTec Wildanger Technik GmbH Seite 17
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Disposal regulations
EU guidelines regarding the disposal of scrap electric appliances (WEEE, 2012/19/EU) were
implemented in the law related to electrical and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE regulations are labelled with the crossed-out
wheeled waste bin logo. This logo indicates that this electric equipment must not be disposed with the
domestic waste.
The company WilTec Technik GmbH has been registrated in the German registry EAR under the
WEEE-registration number DE45283704.
Disposal of used electrical and electronic appliances
(intended for use in the countries of the European
Union and other European countries with a separate
collection system for these appliances).
The logo on the article or on its packaging points out
that this article must not be treated as normal
household waste but must be disposed to a recycling
collection point for electronic and electrical waste
equipment. By contributing to the correct disposal of
this article you protect the environment and the health
of your fellow men. Environment and health are
threatened by inappropriate disposal.
Materials’ recycling helps reduce the consumption of raw materials.
Additional information on recycling this article can be provided by your local community, municipal
waste disposal facilities or the store where you purchased the article.
Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
D-52249 Eschweiler
Important notice:
The reprint or reproduction, even of excerpts, and any commercial use, even in part of this instructions
manual require the written permission of WilTec Wildanger Technik GmbH.
© by WilTec Wildanger Technik GmbH Seite 18
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9

WilTec 61542 Operating instructions

Category
Vacuum cleaner supplies
Type
Operating instructions

WilTec 61542: Your Versatile Cleaning Companion

The WilTec 61542 is a powerful wet and dry vacuum cleaner designed for both household and commercial use. With its robust construction and a variety of attachments, it effortlessly tackles both wet and dry messes, making it an ideal choice for cleaning carpets, floors, cars, and even clogged sinks. The automatic type features a convenient self-draining function, while the manual type offers precise control over suction power.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI