Page is loading ...
Smart-UPS™ Modular Ultra
Uninterruptible Power Supply
User Manual
SRYL5K15RMXLT SRYL5K20RMXLT
SRYL10K15RMXLT SRYL10K20RMXLT
SRYL15K15RMXLT SRYL15K20RMXLT
SRYL20K20RMXLT
EN 990-6492A
06/2023
Legal Information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its
subsidiaries referred to in this guide are the property of Schneider Electric SE or its
subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnished for
informational use only. No part of this guide may be reproduced or transmitted in any form or
by any means (electronic, mechanical, photocopying, recording, or otherwise), for any
purpose, without the prior written permission of Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the guide or its
content, except for a non-exclusive and personal license to consult it on an "as is" basis.
Schneider Electric products and equipment should be installed, operated, serviced, and
maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information contained
in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by
Schneider Electric and its subsidiaries for any errors or omissions in the informational
content of this material or consequences arising out of or resulting from the use of the
information contained herein.
APC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A iii
Contents
Important Safety Instructions ....................................................... 5
Product Handling Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
FCC Class A Radio Frequency Warning . . . . . . . . . . . . . . . . . . . . . . . . . 6
Product Overview ........................................................................ 7
System Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Replacement Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Specifications............................................................................... 8
Environmental . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Physical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Electrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Wiring (Hardwire). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Package contents ...................................................................... 11
UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
XBP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Installation.................................................................................. 12
Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Install Frames in a 4 Post Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Install Frames in a 2 Post Rack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Install Power Module(s) and Battery Module(s). . . . . . . . . . . . . . . . . . . 24
Remove Blanking Panels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Remove Power Module and Battery Module . . . . . . . . . . . . . . . . . . . . . 25
Rear Panel Features.................................................................. 27
UPS Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Battery Frame . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Front Panel Features ................................................................. 28
UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Hardwiring.................................................................................. 29
Terminal Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Connect Battery Frame.............................................................. 31
Connect a single battery frame to UPS . . . . . . . . . . . . . . . . . . . . . . . . . 31
Connect multiple battery frames to UPS . . . . . . . . . . . . . . . . . . . . . . . . 32
Battery Cable Extension . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Operation ................................................................................... 35
Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Set the UPS to Manual Bypass Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 38
APC Smart-UPS Modular Ultra Uninterruptible Power Supply
iv EN 990-6492A
One Line Diagram Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Status LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Start Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Turn on / Turn off the UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
LCD Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
UPS Menu Overview ................................................................. 48
Configuration ............................................................................. 51
Startup configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
General settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Control ....................................................................................... 67
UPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Login to LCD Display ................................................................. 70
Update Firmware ....................................................................... 72
Through USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Through NMC web page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Download Log Files ................................................................... 74
Through USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Through NMC web page . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Emergency Power Off................................................................ 75
Network Management Interface................................................. 77
Smart Battery Management....................................................... 79
Troubleshooting ......................................................................... 81
Transport ................................................................................... 84
Service....................................................................................... 84
Limited Factory Warranty........................................................... 85
APC Worldwide Customer Support ........................................... 86
Important Safety Instructions APC Smart-UPS Modular Ultra Uninterruptible Power Supply
5EN 990-6492A
Important Safety Instructions
SAVE THESE INSTRUCTIONS - This manual contains important instructions that
should be followed during installation and maintenance of
APC™ Smart-UPS™ Modular Ultra series of equipment and batteries.
Read the Safety Guide supplied with the equipment to become familiar
with the safety requirements before trying to install or operate the UPS.
Read the user documentation to become familiar with the equipment
before trying to install or operate it.
The following special messages may appear throughout this document or on the
equipment to warn of potential hazards or to call attention to information that clarifies
or simplifies a procedure.
The addition of this symbol either to a “Danger” or “Warning” safety label
indicates that an electrical hazard exists that will result in personal injury if
the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
Product Handling Guidelines
Inspect the package contents upon receipt. Notify the carrier and dealer if there
is any damage.
DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury.
<18 kg
<40 lb
18-32 kg
40-70 lb
32-55 kg
70-120 lb
>55 kg
>120 lb
Important Safety InstructionsAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A6
FCC Class A Radio Frequency Warning
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at their own expense.
Product Overview APC Smart-UPS Modular Ultra Uninterruptible Power Supply
7EN 990-6492A
Product Overview
APC Smart-UPS Modular Ultra is a high-performance, Uninterruptible Power Supply
(UPS) designed to power high availability servers and other sensitive electronic
equipment. It helps to provide conditioned, reliable AC power to connected equipment,
as well as helps to provide protection from power blackouts, brownouts, swells, sags,
and surges.
The UPS is modular in design and can be configured to deliver different output power
at different levels of redundancy.
System Configuration
NOTE: The numbers in the above table denote the quantity of the particular
component.
Replacement Modules
Model UPS
Frame
N+0 Redundancy N+1 Redundancy
Battery
Frame
Power
Module
Battery
Module
Battery
Frame
Power
Module
Battery
Module
SRYL5K15RMXLT
SRYL5K20RMXLT 1–11–22
SRYL10K15RMXLT
SRYL10K20RMXLT 1–22–33
SRYL15K15RMXLT
SRYL15K20RMXLT 1–33144
SRYL20K20RMXLT 1 1 4 4 1 5 5
Model Input current rating
SRYL5K15RMXLT
100 ASRYL10K15RMXLT
SRYL15K15RMXLT
SRYL5K20RMXLT
125 A
SRYL10K20RMXLT
SRYL15K20RMXLT
SRYL20K20RMXLT
Model Description
SRYLBM Replacement Battery Module
SRYLRMXBP External Battery Pack (XBP) - Rack Mount
SRYL5KPMT 5 kVA / 5 kW Power Module - 208 VAC
SRYLIM Intelligence Module
SRYLFSU6A 125 A, AC Tray
SRYLFSU6B 100 A, AC Tray
SRYLFSU1 SYCC - UPS Communication Card
SRYLFSU2 XRCC - XBP Communication Card
SRYLPD1 Power Distribution Unit (PDU) with (3) L5-20R sockets
SRYLPD2 PDU with (6) L5-20R sockets
SRYLPD3 PDU with (3) L5-30R sockets
SRYLPD4 PDU with (2) L14-30R sockets
SRYLPD5 PDU with (3) L6-30R sockets
SRYLPD7 PDU with (3) L6-20R sockets
SpecificationsAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A8
Specifications
Environmental
Physical
* Net weight includes the net weights of frame(s), battery module(s) and
power module(s).
** Weight with packaging includes the packaged weights of the frames only.
Battery
Temperature Operating 0 to 40 °C (32 to 104 °F)
Storage With batteries: -15 to 45 °C (5 to 113 °F)
Without batteries: -30 to 70 °C (-22 to 158 °F)
Maximum Elevation Operating 0 - 3,000 m (0 - 10,000 ft)
Storage 0 - 15,000 m (50,000 ft)
Humidity 0% to 95% relative humidity, non-condensing
International Protection Code IP20
NOTE:
• Charge the Battery Modules (BM) immediately upon receipt or during first installation.
• Charge the Battery Modules (BM) at least once in twelve (12) months for storage temperatures up to 35 °C (95 °F)
or every six (6) months for storage temperatures above 35 °C (95 °F).
• It is recommend to store the BM below 30 °C (86 °F).
• Environmental factors impact battery life. Elevated ambient temperatures, high humidity, and frequent short
duration discharges caused due to poor quality mains power will shorten battery life.
Rating 5 kVA / 5 kW 10 kVA / 10 kW
Redundancy N+0 N+1 N+0 N+1
Dimensions without
packaging (H x W x D)
390 x 440 x 700 mm
(15.35 x 17.32 x 27.56 in)
Dimensions with packaging
(H x W x D)
695 x 600 x 1000 mm
(27.36 x 23.62 x 39.37 in)
Net Weight* 78.50 kg
(173.06 lb)
97.90 kg
(215.83 lb)
97.90 kg
(215.83 lb)
117.30 kg
(258.60 lb)
Weight with packaging** 79.50 kg (175.27 lb)
Rating 15 kVA / 15 kW 20 kVA / 20 kW
Redundancy N+0 N+1 N+0 N+1
Dimensions without
packaging (H x W x D)
390 x 440 x 700 mm
(15.35 x 17.32 x 27.56 in)
520 x 440 x 740 mm
(20.47 x 17.32 x 29.13 in)
Dimensions with packaging
(H x W x D)
695 x 600 x 1000 mm
(27.36 x 23.62 x 39.37 in)
UPS: 695 x 600 x 1000 mm (27.36 x 23.62 x 39.37 in)
Battery Frame: 300 x 600 x 1000 mm
(11.81 x 23.62 x 39.37 in)
Net Weight* 117.30 kg
(258.60 lb)
156.30 kg
(344.58 lb)
156.30 kg
(344.58 lb)
175.70 kg
(387.35 lb)
Weight with packaging** 79.50 kg
(175.27 lb)
UPS Frame: 79.5 kg (175.27 lb)
Battery Frame: 27.3 kg (60.19 lb)
Battery type Lithium-ion
Battery module rating 180 V 2.47 Ah; 444.6 Wh
Specifications APC Smart-UPS Modular Ultra Uninterruptible Power Supply
9EN 990-6492A
Electrical
1 With no load applied on L1-L2
2 With no load applied on L1-N or L2-N
CAUTION
RISK OF FIRE
Connect the UPS only to a circuit provided with recommended maximum branch
circuit over-current protection in accordance with the National Electrical Code,
ANSI/NFPA 70 and the Canadian Electrical Code, Part I, C22.1.
Failure to follow these instructions could result in equipment damage and
minor or moderate injury.
Model Branch current circuit
breaker rating
SRYL5K15RMXLT
100 ASRYL10K15RMXLT
SRYL15K15RMXLT
SRYL5K20RMXLT
125 A
SRYL10K20RMXLT
SRYL15K20RMXLT
SRYL20K20RMXLT
Model Output Voltage Setting Max. Load Power
SRYL5K15RMXLT
SRYL5K20RMXLT
120/208 VAC
L1-N 1
2.5 kW / 2.5 kVA
L2-N 1
L1-L2 2 4.3 kW / 4.3 kVA
120/240 VAC
L1-N 1
2.5 kW / 2.5 kVA
L2-N 1
L1-L2 2 5 kW / 5 kVA
SRYL10K15RMXLT
SRYL10K20RMXLT
120/208 VAC
L1-N 1
5 kW / 5 kVA
L2-N 1
L1-L2 2 8.6 kW / 8.6 kVA
120/240 VAC
L1-N 1
5 kW / 5 kVA
L2-N 1
L1-L2 2 10 kW / 10 kVA
SRYL15K15RMXLT
SRYL15K20RMXLT
120/208 VAC
L1-N 1
7.5 kW / 7.5 kVA
L2-N 1
L1-L2 2 13 kW / 13 kVA
120/240 VAC
L1-N 1
7.5 kW / 7.5 kVA
L2-N 1
L1-L2 2 15 kW / 15 kVA
SRYL20K20RMXLT
120/208 VAC
L1-N 1
10 kW / 10 kVA
L2-N 1
L1-L2 2 17.30 kW / 17.30 kVA
120/240 VAC
L1-N 1
10 kW / 10 kVA
L2-N 1
L1-L2 2 20 kW / 20 kVA
SpecificationsAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A10
Input
Output
Wiring (Hardwire)
Input
Output
Input Frequency 40 to 70 Hz (Auto Sensing)
Nominal Input
Voltage
• 120/208 VAC (120°)
• 120/240 VAC (180°)
Output
Frequency
• 50/60 Hz ± 3 Hz (Auto Sense)
• 50/60 Hz ± 0.1 Hz (User Selectable)
• 50/60 Hz ± 3 Hz (User Selectable)
Nominal Output
Voltage
• 120/208 VAC (120°)
• 120/240 VAC (180°)
Model Input
Wire Gauge Tightening
Torque
Connection
SRYL5K15RMXLT
SRYL10K15RMXLT
SRYL15K15RMXLT
#3 AWG 40 in-lb
(4.5 N-m)
External Circuit
Breaker
4 Wire
(2Ø + N + )
SRYL5K20RMXLT
SRYL10K20RMXLT
SRYL15K20RMXLT
SRYL20K20RMXLT
#1 AWG
Model Output
Wire Gauge Torque Connection
SRYL5K15RMXLT
SRYL10K15RMXLT
SRYL15K15RMXLT
#3 AWG 40 in-lb
(4.5 N-m)
Distribution
Panel
4 Wire
(2Ø + N + )
SRYL5K20RMXLT
SRYL10K20RMXLT
SRYL15K20RMXLT
SRYL20K20RMXLT
#1 AWG
Package contents APC Smart-UPS Modular Ultra Uninterruptible Power Supply
11EN 990-6492A
Package contents
NOTE: The power modules and battery modules are packaged separately. The
quantity depends on the UPS rating. Refer “System Configuration” on page 7 for
details.
UPS
XBP
UPS Frame Railkit with necessary hardware Safety Guide
Terminal block plug for
MODBUS termination
Terminal block plug for EPO
termination
APC
Temperature
Sensor
(AP9335T)
Ethernet cable - 7 ft (2134 mm)
length
CAN bus communication
end termination dongle
Battery modules Power modules
Battery
Frame
Railkit with necessary hardware Safety Guide
Battery modules CAN bus communication
end termination dongle
XBP communication cable
sy10257a
Im
porton
ant Saf
et
y Info
rmat
i
UP
S
SA
VETHISG
UIDE
Th
is Safe
ty Guid
e
c
on
tain
s impo
rtan
t in
stn s ullo
we
d d
u
ring
ins
talla
tio
n a
n
d
ruc
tios
th
ath
old
be
fo
m
a
inten
a
n
ce o
f th
e A
P
C
T
M
by
Sc
hne
id
e
r E
le
c
tric e
q
u
ipme
n
t an
d b
atte
rie
s.
I istd
ed foynl
ec
tric
cu w
h s
e
tupis
t
all, re
loca
te
, or ma
in ta
in
t in
e
nr b S
c
heid
e
r E s
to
me
rs o, n
A
PC
A
PC
b
y
S
ch
ne
ile
ctri c
e
qu
d
er E ipme
nt.
Re
a
d, u
n
d
ersndan
dollo fe
t in
stc
ton
s c
otin
e
d in th
is ma
n
ual. F
a
ilurwsfe
ty
ta ,
f w s
ayruinae
to
f
o
llo a
A
LL
insruinsnre
s
ult in
tcto ad
w
a
rn
ing
s
c
o
ulde
q
uip
m
e
nt da
m
ag s s
in
jury
, or de
a
th.
e,e
rio
u
Ch
a
ng
es
a
nd
mo
difica
tion
s to
t
h
is u
ni ex
prl
t n
ote
s
s
y a
p
pro
ve
d
b
y
S e
r Erpra
t
io
n c
ou
ld
c
hn
eid lec
tri
c
C
oo
IT
vid th
e
owa
rra
nty.
Prod
u
cn
dlin
g
Gu
id
elin
es
t H
a
?
A
d
h
ere
to
d lo
ca
l ele
ctrical co
d
e
s.
alln
a
tiona
l a
n
?
Th
is e
q
uipme
nt is fo
r use
in
a rtricte
d
.
e
sa
cce
ss loca
tio n
?
A
ll w
ir ing
m
ust b
e
pe
rfo
rm
e
d b
y a q
u
a
lifie d e
lectrician
.
?D
o
ot w
o a
loe
ronn
nrkn
e
und h
aza
rd u
s
coditio s.
?T
h is t fo indoso
n
is in
e
nd
e
dror ue
ly.
UP
S
?D
o
n
o
t
osnie
ct sun
lig
h
t, in
co
n
tact wi
p
e
ra
te
th
i uit in drth
flu
id s, o
r wh
e
re
there
is exce
ssiv e
dt
ou
u
sr hmid
ity.
?
Be su
re the
a
ir ven ono
t blocke
d
. A
l
lo
w
a
d
eq
u
ate
sp
a
ce f
o
r p
ro
pe
r ven
tilation.
ts n
th
e
a
re
UPS
?Fo
r w
ith a
a
fa
ctory in
stalle
d
p
o
U
PSw
er co
rd, co
n
ne
ct th
e
po
we
r cab
le
n
o
t u
se
UP
Sd
ir
e
ctly to a w
a
ll o
utle
t. D
o
su
re
prso
r e
xt e
n
sion
co
r
d
s.
gro
tecto
?
The
e
q
uip me
n
t
is h
e
a
v. A
lw
ays
yp
ra
ctice
safe
lifting
te
chn
iq
u
es a
d
e
qua
te
fot o
f th
e
e
qu
ip
m
e
nt.
r th
e
w
eigh
?
T
he
b
a
tte
ries a
re he
a
vy.tes
bre igd
e
xa
l b e
r p s (s), i
n
a
R
e
m
o
ve th
e
b
ate
ri e
fon
stallin th
e ante
r
nattyack
UP
SXLB
P
ra
ck.
?A
lwa
ys in
st a
ll se btma
ck c
XLB
P a
t th o
to in r-m
ou
nt
on
figurations. Th
e
must b
e
in
st
a
lled a
bo
vs.
UPSX
LB
P
e
th
e
?
Always instl e
ral eq
u
ip
m
en
t a
bov
alp
erip
he th
e
in
UPS r
a
ck-m
oun
t co
nfigu
ra
t
ions.
Elctria
l s
a
ecfe
ty
?D
o
ot
hd
le a m a
llic coe
ct
oe
f
na
nn
ye
tn
nr b ore
p
o
we
r h
a
s b
e
e
n
disco
n
n
ecte
d
.
?
F
or m
od
elsh
ard
we
d in uconectinth ancicus m prm bya
q
u
w
ith
a
irpt, th
e no to e
b
rch rit (m
a
in)u
st b
ee
rfoe
d a
lifie d
ele
ctrician
.
?2
3
0
V
mo
d
els on
ly: In o
rd
er to
mainta
in com
p
liantd
re
ctivorou
c Epu
ce
with
h
e
ie
fr pdts sold in u
roe
, otp
u
t
E
MC
co
r
d
s attach
e
d
ot th
e
mu
st
U
PSn
o 1
0 m
e
te
rs in le
n
gth.
t e
xce
ed
?Th
e
p
rd
u
ctor fo
r the
ote
ctive ea
rth
conU
PS
carr e
srren
t fro
m
th
i the
lea
kag
e cue l o
a
d
d ter e
q
uipm
e
n
t).
e
vice
s (co
mp
u
An
insu
la te
d g
rou
n
d con
d
us to
be
installe
d a
s p
a
r
t
ctor io circuit tha
t
f the
b
ra
n
chsup
p
lie s.n
du
ct
o
r
t
h
e
Th
e
co
U
P
S
mu
st h
a
vth
e
s san
s
u
la
tion ma
teri
a
l a
s the
g
ro
und
e
d
a
nd
u
n
grou
n
d
ed b
ra
nch circuit
su
p
p
ly co
n
du
cto
rs.
e
ame
iz e
n
d
i
T
hnuctoyp
ically b
e
gr, withr w
ithta
y
e
codr w
ill t e
e
n oo
u e
llow stripe.
?L
e
akag
e
cu
rre
n
tfor
a
p
lu gl Typ
e
A may e
xcee
d
3
.5
mA
w
h
en
a
sep
a
ra
te
g
ro
un
d e
red
.
ga
be,tmin
al is us
U
PS
?
T
he in
p
u
t grou
n
d
co
n
dmu
st b
e
p
rop
e
rly
b
on
d
e
d to p
ro
tective
earth
a
t
the
servic e
p
ane
l.
U
PSu
ctor
?
I inp
u
t p
owe
r is su
p
p
lie d b
y a
s
e
p
a
rately d
e
ri
ve
d
sys
te
m, the
g
ro
und
co
ndu
cto
r mu
st b
e p
ro
p
er
ly b
o
nde
d
f the UP
S
a
t the
uplyre
nr set
sp tra
n
sfo
me
r o
r m
o
tor gera
to .
<
1
8
kg
<
4
0 lb
1
8
kg
-3
2
4
0 lb
-7
03
2
-55
kg
7
0
-12
0
lb
>
55 kg
>
12 lb
0
1234
sy103a
43
sy103a
42
sy103a
39
Im
porton
ant
Saf
et
y Info
rmat
i
UP
S
SA
VETHISG
UIDE
Th
is Safe
ty Guid
e
c
on
tain
s impo
rtan
t in
stn s ullo
we
d d
u
ring
ins
talla
tio
n
a
n
d
ruc
tios
th
ath
old
be
fo
m
a
inten
a
n
ce o
f th
e A
P
C
T
M
by
Sc
hne
id
e
r E
le
c
tric e
q
u
ipme
n
t an
d b
atte
rie
s.
I istd
ed foynl
ec
tric
cu w
h s
e
tupis
t
all, re
loca
te
, or ma
in ta
in
t in
e
nr b S
c
heid
e
r E s
to
me
rs o, n
A
PC
A
PC
b
y
S
ch
ne
ile
ctric
e
qu
d
er E ipme
nt.
Re
a
d
, u
n
d
ersndan
dollo fe
t in
stc
ton
s c
otin
e
d in th
is ma
n
ual. F
a
ilurwsfe
ty
ta ,
f w s
ayruinae
to
f
o
llo a
A
LL
insruinsnre
s
ult in
tcto ad
w
a
rn
ing
s
c
o
ulde
q
uip
m
e
nt da
m
ag s s
in
jury
, or de
a
th.
e,e
rio
u
Ch
a
ng
es
a
nd
mo
d
ifica
tion
s to
t
h
is u
ni ex
prl
t n
ote
s
s
y a
p
p
ro
ve
d
b
y
S e
r Erpra
t
io
n c
ou
ld
c
hn
eid lec
tri
c
C
oo
IT
vid th
e
owa
rra
nty.
Prod
u
cn
dlin
g
Gu
id
elin
es
t H
a
?
A
d
h
ere
to
d lo
ca
l ele
ctrical co
d
e
s.
alln
a
tiona
l a
n
?
Th
is e
q
uipme
nt is fo
r use
in
a rtricte
d
.
e
sa
cce
ss loca
tio n
?
A
ll w
ir ing
m
ust b
e
pe
rfo
rm
e
d b
y a q
u
a
lifie d e
lectrician
.
?D
o
ot w
o a
l
oe
ronn
nrkn
e
und h
aza
rd u
s
coditio s.
?T
h is t fo indoso
n
is in
e
nd
e
dror ue
ly.
UP
S
?D
o
n
o
t
osnie
ct sun
lig
h
t, in
co
n
tact wi
p
e
ra
te
th
i uit in drth
flu
id s, o
r wh
e
re
there
is exce
ssiv e
dt
ou
u
sr hmid
ity.
?
Be su
re the
a
ir ven ono
t blocke
d
. A
l
lo
w
a
d
eq
u
ate
sp
a
ce f
o
r p
ro
pe
r ven
tilation.
ts n
th
e
a
re
UPS
?Fo
r w
ith a
a
fa
ctory in
stalle
d
p
o
U
PSw
er co
rd, co
n
ne
ct th
e
po
we
r cab
le
n
o
t u
se
UP
Sd
ir
e
ctly to a w
a
ll o
utle
t. D
o
su
re
prso
r e
xt e
n
sion
co
r
d
s.
gro
tecto
?
The
e
q
uip me
n
t
is h
e
a
v. A
lw
ays
yp
ra
ctice
safe
lifting
te
chn
iq
u
es a
d
e
qua
te
fot o
f th
e
e
qu
ip
m
e
nt.
r th
e
w
eigh
?
T
he
b
a
tte
ries a
re he
a
vy.tes
bre igd
e
xa
l b e
r p s (s), i
n
a
R
e
m
o
ve th
e
b
ate
ri e
fon
stallin th
e ante
r
nattyack
UP
SXLB
P
ra
ck.
?A
lwa
ys in
st a
ll se btma
ck c
XLB
P a
t th o
to in r-m
ou
nt
on
figurations. Th
e
must b
e
in
st
a
lled a
bo
vs.
UPSX
LB
P
e
th
e
?
Always instl e
ral eq
u
ip
m
en
t a
bov
alp
erip
he th
e
in
UPS r
a
ck-m
oun
t co
nfigu
ra
t
ions.
Elctria
l s
a
ecfe
ty
?D
o
ot
hd
le a m a
llic coe
ct
oe
f
na
nn
ye
tn
nr b ore
p
o
we
r h
a
s b
e
e
n
disco
n
n
ecte
d
.
?
F
or m
od
elsh
ard
we
d in uconectinth ancicus m prm bya
q
u
w
ith
a
irpt, th
e no to e
b
rch rit (m
a
in)u
st b
ee
rfoe
d a
lifie d
ele
ctrician
.
?2
3
0
V
mo
d
els on
ly: In o
rd
er to
mainta
in com
p
liantd
re
ctivorou
c Epu
ce
wi
th
h
e
ie
fr pdts sold in u
roe
, otp
u
t
EMC
co
r
d
s attach
e
d
ot th
e
mu
st
U
PSn
o 1
0 m
e
te
rs in le
n
gth.
t e
xce
ed
?Th
e
p
rd
u
ctor fo
r the
ote
ctive ea
rth
conU
PS
carr e
srren
t fro
m
th
i the
lea
kag
e cue l o
a
d
d ter e
q
uipm
e
n
t).
e
vice
s (co
mp
u
An
insu
la te
d g
rou
n
d con
d
us to
be
installe
d a
s p
a
r
t
ctor io circuit tha
t
f the
b
ra
n
chsup
p
lie s.n
du
ct
o
r
t
h
e
Th
e
co
U
P
S
mu
st h
a
vth
e
s san
s
u
la
tion ma
teri
a
l a
s the
g
ro
und
e
d
a
nd
u
n
grou
n
d
ed b
ra
nch circuit
su
p
p
ly co
n
du
cto
rs.
e
ame
iz e
n
d
i
T
hnuctoyp
ically b
e
gr, withr w
ithta
y
e
codr w
ill t e
e
n oo
u e
llow stripe.
?L
e
akag
e
cu
rre
n
tfor
a
p
lu gl Typ
e
A may e
xcee
d
3
.5
mA
w
h
en
a
sep
a
ra
te
g
ro
un
d e
red
.
ga
be,tmin
al is us
U
PS
?
T
he in
p
u
t grou
n
d
co
n
dmu
st b
e
p
rop
e
rly
b
on
d
e
d to p
ro
tective
earth
a
t
the
servic e
p
ane
l.
U
PSu
ctor
?
I inp
u
t p
owe
r is su
p
p
lie d b
y a
s
e
p
a
rately d
e
ri
ve
d
sys
te
m, the
g
ro
und
co
ndu
cto
r mu
st b
e p
ro
p
er
ly b
o
nde
d
f the UP
S
a
t the
uplyre
nr set
sp tra
n
sfo
me
r o
r m
o
tor gera
to .
<
1
8
kg
<
4
0 lb
1
8
kg
-3
2
4
0 lb
-7
0
3
2
-55
kg
7
0
-12
0
lb
>
55 kg
>
12 lb
0
sy103a
43
InstallationAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A12
Installation
Unpacking
UPS Frame
CAUTION
RISK OF DROPPED OR FALLING EQUIPMENT
The equipment is heavy. Follow guidelines given in “Product Handling Guidelines”
on page 5.
Do not use the UPS as a safety disconnect.
Failure to follow these instructions could result in equipment damage and
minor or moderate injury.
Cut open the shipping straps with a
general-purpose knife.
Lift the carton off the pallet.
Remove the UPS railkit, Litkit and
store them safely.
Remove the top packing cushions.
Lift the UPS frame off the pallet.
sy10252a
sy1025a
3
sy10254a
sy
10255a
sy10256a
Installation APC Smart-UPS Modular Ultra Uninterruptible Power Supply
13EN 990-6492A
Battery Frame
Install Frames in a 4 Post Rack
Models with UPS frame only
Open the carton. Remove the railkit, Litkit and store
them safely.
Remove the top packing cushions. Lift the battery frame out from the
carton.
CAUTION
RISK OF DROPPED OR FALLING EQUIPMENT
• The equipment is heavy. Follow guidelines given in “Product Handling Guidelines”
on page 5 for lifting and sliding the frame into the rack.
• Install power modules and battery modules only after the frame is installed in the
rack.
• Place the rack in the location where the equipment will be used.
• Do not move the rack once the frame is secured.
• Secure the frame in the rack before installing power modules and battery
modules.
Do not use the UPS as a safety disconnect.
Failure to follow these instructions could result in equipment damage and
minor or moderate injury.
Install the UPS rails (supplied) in
the rack.
Be sure to align the bottom
mounting holes on the rails to
hole #1 (bottom hole) on the rack.
sy10258a
sy10259a
sy10260a
sy1026a
1
sy10265a
1
1
InstallationAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A14
Secure the rails to the rack
with 16 flat head screws
and conical washers
(supplied)
(NOTE: Tightening torque:
24 to 26 lb-in).
Utilize holes 1, 3, 4, and 5
on the front of the rails and
all the 4 holes on the rear of
the rails.
Install cage nuts in the rack.
The number indicated in the
illustration is the position number
counted from the bottom.
Install the UPS frame in
the rack.
sy10266a
16x
sy1 02 67a
26
24
21
15
11
sy10269a
Installation APC Smart-UPS Modular Ultra Uninterruptible Power Supply
15EN 990-6492A
Models with both UPS and battery frames
Secure the UPS frame to
the rack. Use the 14 nos.
ornamental screws
supplied.
NOTE: Tightening torque:
24 to 26 lb-in.
Install battery frame rail
(supplied) in the rack.
Be sure to align the bottom
mounting hole on the rails
to hole #1 (bottom) on the
rack.
Secure the battery frame
rail to the rack with 12 flat
head screws and conical
washers (supplied).
NOTE: Tightening torque:
24 to 26 lb-in.
Utilize holes 2 and 4 on the
front of the rails and all the
4 holes on the rear of the
rails.
sy10269a
1x4
sy10384a
2
2
1x2
sy10271a
InstallationAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A16
Install up to 3 nos. (on each
rail) panhead screws with
SEMs washer (supplied) to
lock the rails in position.
NOTE: Install the panhead
screws with SEMs at those
locations where the tapped
hole is visible through the
slot in the rail.
Install UPS rail (supplied) in the
rack.
Be sure to align the bottom
mounting hole on the rails to
hole #10 (from bottom) on the
rack.
Secure the UPS rail to
the rack with 16 flat head
screws and conical
washers (supplied).
NOTE: Tightening
torque: 24 to 26 lb-in.
Utilize holes 1, 3, 4,and
5 on the front of the rails
and all the 4 holes on the
rear of the rails.
sy10a
379
sy10272a
10
10
sy10273a
16x
Installation APC Smart-UPS Modular Ultra Uninterruptible Power Supply
17EN 990-6492A
Install cage nuts in the rack.
The number indicated in the
illustration is the position number
counted from the bottom.
Install the battery frame in
the rack.
Secure the battery
frame to the rack.
Use 6 nos.
ornamental screws
supplied.
NOTE:
Tightening torque:
24 to 26 lb-in.
sy102 a74
8
20
24
30
33
35
sy10275a
sy10276a
6x
InstallationAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A18
Install the UPS frame in
the rack.
Secure the UPS frame to
the rack. Use 14 nos.
ornamental screws
supplied.
NOTE: Tightening torque:
24 to 26 lb-in.
sy10277a
sy10278a
1x4
Installation APC Smart-UPS Modular Ultra Uninterruptible Power Supply
19EN 990-6492A
Install Frames in a 2 Post Rack
NOTE: The 2 post mounting brackets (SRYLOPT2 for mounting UPS Frame and
SRYLOPT5 for mounting the XBP frame) are available as an accessory and should be
procured separately.
Models with UPS frame only
CAUTION
RISK OF DROPPED OR FALLING EQUIPMENT
• The equipment is heavy. Follow guidelines given in “Product Handling Guidelines”
on page 5 for lifting and sliding the frame into the rack.
• Install power modules and battery modules only after the frame is installed in the
rack.
• Place the rack in the location where the equipment will be used.
• Do not move the rack once the frame is secured.
• Secure the frame in the rack before installing power modules and battery
modules.
Do not use the UPS as a safety disconnect.
Failure to follow these instructions could result in equipment damage and
minor or moderate injury.
Anchor the 2 post rack to the floor.
Install both the UPS frame lower brackets in the
rack and secure them to the rack using 10 nos.
screws (supplied).
NOTE: Tightening torque: 24 to 26 lb-in.
Be sure to align the bottom holes in the
brackets to the 2nd hole from the bottom in the
rack.
Install both the left and right UPS
top brackets in the rack and secure
them to the 4 nos. ornamental
screws provided.
NOTE:
Tightening torque: 24 to 26 lb-in.
sy10394a
4x
#2
sy10404a
4x
sy1040 0a
InstallationAPC Smart-UPS Modular Ultra Uninterruptible Power Supply
EN 990-6492A20
Models with both UPS and battery frames
Install the UPS frame in
the rack.
Secure the UPS frame to the left and
right UPS frame lower brackets using
4 nos. ornamental screws (supplied).
NOTE:
Tightening torque: 24 to 26 lb-in.
Secure the UPS frame upper brackets to
the rack using 6 nos. screws (supplied).
NOTE: Tightening torque: 24 to 26 lb-in.
Anchor the 2 post rack to the floor.
sy10405a
sy10406a
6x
sy10407a
sy10394a
4x
/