Oregon Scientific EW96 User manual

Brand: Oregon Scientific

Model: EW96

Category: Alarm clocks

Type: User manual

Oregon Scientific EW96 is a projection alarm clock and indoor thermometer that automatically synchronizes its time and calendar with an atomic clock signal. It features a clear and easy-to-read display showing indoor temperature, time, date, and alarm settings. The unit allows users to set two alarms, turn on the backlight for easy viewing in the dark, and project the time onto a dark background within a range of 3 to 12 feet.

C8314A Size: A4

OVERVIEW

RECEIVER

1.Projector:

• Use it to project the time.

2.SNOOZE/LIGHT key:

• In normal time mode, press it once to turn on

the backlight for 5 seconds.

• Press it to silence the current alarm when it is

going and enter the snooze mode for 8 minutes.

3.LCD display:

• Displays time, indoor temperature and date.

4.+ key:

• In time setting mode, press it to increase the

setting values.

5.SET CLOCK key:

• In normal time mode, press it once to enter the

normal time setting mode.

• In normal time setting mode, press it to step

the setting items. Press and hold it to exit the

setting mode in any step.

6.- key:

• In time setting mode, press it to decrease the

setting values.

7.DC jack:

• Plug DC adaptor to power the clock.

8.ALARM ON/OFF key:

• Press it once to turn on the backlight and display

the alarm time for 5 seconds.

• Press it again to turn on/off the alarm.

9.SET ALARM key:

• Press it once to turn on the backlight for 5

seconds, and press it again to enter the alarm

time setting mode.

• In alarm time setting mode, press it to step the

setting items.

10.FOCUS turning knob:

• Focus the projected image.

RECEPTION OF RADIO CONTROLLED TIME SIGNAL

The time and calendar are radio-controlled. The current

time and calendar are automatically synchronized with

the atomic clock signal from Fort Collins, Colorado.

When used for the first time (after inserting batteries

or pressing “RESET” key), the clock will start to search

for the atomic clock signal and the signal reception

icon will flash for 5 minutes.

SIGNAL RECEPTION INDICATOR

The wave segment flashing means time signals are

being received. The signal quality could be classified

into 3 types:

Note

1. The unit will automatically search for the time

signal at 2:00am (3:00am or 4:00am is also

available if the signal is not received at 2:00am),

8:00am, 2:00pm, and 20:00 each day.

2. Always place the unit away from electrical

devices such as televisions, computers,

telephones, etc.

3. Avoid placing the unit on or next to metal plates.

4. If possible, place the unit next to a window.

Signal reception is greatly decreased when located

in closed areas like basements or metal buildings.

5. Do not start reception in moving vehicles or trains.

TIME AND CALENDAR MANUAL SETTING

If you are out of reach of the Radio Controlled sensor

or if the reception is not reachable, the time and calendar

can be set manually. As soon as the signal of sensor

is received again, the clock will automatically

synchronize with the exact time and calendar.

1. In normal time mode, press “SET CLOCK” key

once to enter the time setting mode.

2. Press “+” or “-” key to change the settings.

3. Press “SET CLOCK” to confirm. The setting order

is: 12/24-hr format, time, time zone offset, year,

day/month format, date.

4. Press “SET CLOCK” key to save and exit the

setting mode.

Note

1. During the setting period, press and hold “+” or “-”

key to speed up the change of settings.

2. The time zone indicators are abbreviated as

below: P=Pacific, M=Mountain, C=Central,

E=Eastern.

ALARM TIME SETTING

1. In normal time mode, press “SET ALARM” key

once to enter the alarm time setting mode.

2. Press “+” or “-” key to set hour/minute.

3. Press “SET ALARM” key to save and exit the

setting mode. “ ” indicates alarm is ON.

Note

1. The alarm will be automatically turned on when

you set the alarm time.

2. During the alarm time setting period, press and

hold “+” or “-” key to speed up the change of

settings.

USING ALARM FUNCTION

1. Follow the directions above to set the alarm

time.

2. In normal time mode, press “ALARM ON/OFF”

key once to display the current alarm time.

3. Press it again to turn alarm ON/OFF.

TO SILENCE THE ALARM

1. Press “SNOOZE/LIGHT” to silence the alarm

for 8 minutes. The “ ” will be flashing.

2. Press any other key to turn the alarm off and

activate it again after 24 hours.

3. If no key is pressed within 120 seconds, the

alarm will be turned off and be activated again

after 24 hours.

USING THE PROJECTOR

Slide the “PROJECTION ON/OFF” switch to turn on/

off the projection light. The projection light must be on

a dark background and within 1-4 meters (3 to 12 feet)

from the clock, see example below:

Note

1. Slide “PROJECTION ON/OFF” to turn on the

projection function.

2. Press “SNOOZE/LIGHT” to turn on the projector

for 5 seconds.

3. When using DC power adapter, the projector will

be turned on all the time.

4. If the alarm is set to go off, the alarm icon “ ”

will be projected.

5. Press “180 FLIP” to rotate the projected image

by 180°.

6. Turn “FOCUS” knob to focus the projected image.

BATTERY REPLACEMENT

If the low battery icon turns on next to time, replace

the main unit’s battery with 2 new AA batteries.

Note

Attention! Please dispose of the used unit or batteries

in an ecologically safe manner.

No signal Weak signal

Excellent signal

ALARM

Projection Alarm Clock

with Indoor Thermometer

Model: EW96

USER MANUAL

Thank you for your purchase of this Projection Alarm

Clock. Please read these instructions carefully and

keep the manual well for future reference.

The unit has a clear and easy-to-read display that

shows the indoor temperature, time and date.

This product is designed to synchronize its date and

time automatically once it is within range of the WWVB-

60 signal from the atomic clock in Fort Collins, Colorado.

12/24 Hr setting

Time setting

Time zone setting

Year setting MD/DM settingMonth-Date setting

Normal time mode

Alarm time setting

Low battery indicator

11.BATTERY COMPARTMENT:

• Accommodates 2 AA size batteries.

12.RESET key:

• Press it to return all values to default values.

• In case of malfunction, the unit may be required

to reset.

13.°C/°F slide switch:

• Slide it to switch between Celsius and Fahrenheit.

14.PROJECTION ON/OFF slide switch:

• Slide it to turn on/off the projector.

15.180° FLIP key:

• Press it to rotate the projected image by 180°.

16.RCC key:

• In normal time mode, press it once to receive

the RC signal for reception testing.

17.BATTERY DOOR

LCD DISPLAY

1. Time zone

2. Low battery indicator

3. Signal reception indicator

4. Indoor temperature

5. Time

6. Alarm time & Date

OPERATING THE MAIN UNIT

1. Remove the battery door and insert 2 new AA

size batteries as per the polarity information

marked on the battery compartment.

2. Press “RESET” key to restart the clock.

3. Slide “°C/°F” switch to select between Celsius

and Fahrenheit.

4. Replace the battery door.

SPECIFICATIONS

Note We recommend that you use alkaline batteries

with this product for longer usage and lithium batteries

in temperatures below freezing.

PRECAUTIONS

• Do not subject the unit to excessive force,

shock, dust, temperature or humidity.

• Do not cover the ventilation holes with any items

such as newspapers, curtains etc.

• Do not immerse the unit in water. If you spill liquid

over it, dry it immediately with a soft, lint-free cloth.

• Do not clean the unit with abrasive or corrosive

materials.

• Do not tamper with the unit’s internal components.

This invalidates the warranty.

• Only use fresh batteries. Do not mix new and old

batteries.

• Images shown in this manual may differ from

the actual display.

• When disposing of this product, ensure it is

collected separately for special treatment and

not as normal household waste.

• Placement of this product on certain types of

wood may result in damage to its finish for which

Oregon Scientific will not be responsible. Consult

the furniture manufacturer’s care instructions for

information.

• The contents of this manual may not be reproduced

without the permission of the manufacturer.

• Do not dispose old batteries as unsorted municipal

waste. Collection of such waste separately for

special treatment is necessary.

• Please note that some units are equipped with a

battery safety strip. Remove the strip from the

battery compartment before first use.

Note The technical specifications for this product

and the contents of the user manual are subject to

change without notice.

ABOUT OREGON SCIENTIFIC

Visit our website (www.oregonscientific.com) to learn

more about Oregon Scientific products. If you’re in the

US and would like to contact our Customer Care

department directly, please visit:

www2.oregonscientific.com/service/support

For international inquiries, please visit:

www2.oregonscientific.com/about/international

FCC STATEMENT

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1)This device may not cause harmful interference,

and (2)This device must accept any interference

received, including interference that may cause

undesired operation.

WARNING Changes or modifications to this unit not

expressly approved by the party responsible for

compliance could void the user’s authority to operate

the equipment.

Note This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio / TV

technician for help.

DECLARATION OF CONFORMITY

The following information is not to be used as contact

for support or sales. Please visit our website at

www2.oregonscientific.com/service/support for all

inquiries.

Name: Oregon Scientific, Inc.

Address: 19861 SW 95th AVe., Tualatin,

Oregon 97062 USA

Telephone No.: 1-800-853-8883

Declare that the product

Product No.: EW96

Product Name: Projection Alarm Clock

with Indoor Thermometer

Manufacturer: IPM Concepts Limited

Address: Block C, 9/F, Kaiser Estate,

Phase 1,41 Man Yue St.,

Hung Hom, Kowloon,

Hong Kong

is in conformity with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) This device may not cause harmful

interference.

2) This device must accept any interference

received, including interference that may cause

undesired operation.

DESCRIPTION

138 x 42 x 82 mm

(5.43 x 1.65 x 3.23 in)

-5°C to 50°C (23)°F to 122°F

0.1°C (0.2)°F

2 x AA 1.5V batteries

TYPE

MAIN UNIT

L x W x H

Temperature

range

Temperature

resolution

Power

Weight 183g

Oregon Scientific EW96 User manual

Brand: Oregon Scientific

Model: EW96

Category: Alarm clocks

Type: User manual

Download PDF

report

Oregon Scientific EW96 User manual

Oregon Scientific EW96 User manual

Related papers

Other documents