Lightolier S6132BU User manual

  • Hello! I am an AI chatbot trained to assist you with the Lightolier S6132BU User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Lightolier is a Philips group brand
631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710
We reserve the right to change details of design, materials and finish.
www.lightolier.com © 2008 Philips Group E0608
Job Information Type:
Job Name:
Cat. No.:
Lamp(s):
Notes:
Calculite
®
CFL Recessed Downlighting S6132BU
Page 1 of 1 6" Aperture Triple Tube Frame-In Kit
Features
1. Socket Cup: Snaps onto reflector neck to assure consistently correct optical
alignment without tools.
2. Mounting Frame: Galvanized stamped steel for dry or plaster ceilings.
3. Retaining Springs: Precision-tooled steel friction springs secure reflector to
mounting frame for quick, tool-less installation.
4. Mounting Brackets: Galvanized steel. Adjust from inside of fixture.
Use 3/4" or 1 1/2" lathing channel, 1/2" EMT, or optional mounting bars.
5. Ballast/J-Box: Electronic 120V - 277V. UL listed for through branch circuit
wiring with max of (8) No. 12 AWG, 90°C supply conductors. Outboard
mounted to reduce heat transfer and maintain lamp efficacy and life. Service
from below without tools.
Note: For ballast electrical data and latest lamp/ballast compatibility refer to
“Ballast specification sheet for complete electrical data.
Options & Accessories
Standard Dimming Options:
S6132B
CU3 Lightolier PowerSpec 3% Dimming (120/277V)
J1LD3 Lutron 3% Dimming (120V)
J2LD3 Lutron 3% Dimming (277V)
JUM7 Mark 7 Dimming (120/277V)
J1MX Mark 10 Dimming (120V)
J2MX Mark 10 Dimming (277V)
Other dimming product available, please consult factory
Options & Accessories (continued)
Mounting Bars: 1950 - 18” Set of (2)
1951 - 27” Set of (2)
T-Bar Anchor Clips: 1956 - Set of (4), for use with above
Labels
UL listed for damp locations. 8091F, 8091C, 8091P, UL listed for wet locations.
NS6132BU available for I.B.E.W.
6" (152mm) Dia.
32W 9 7/8"
(251mm)
7 1/4" (184mm) Overlap
26W 9 3/8"
(238mm)
3"
(76mm)
1 1/8" (29mm) Max.
Ceiling Thickness
1
4
5
2
3
4 5/8"
(117mm)
10"
(254mm)
12 3/4"
(324mm)
Top View
Ceiling Cutout: 6 9/16(167 mm) Dia. (Shown with 8021 Trim Kit)
Frame-In Kit Compatible Reflector Trims
S6132BU
Electronic 120V-277V
Downlights Wall Washers
26 or 32W Triple Tube
8021
Open, Vertical Lamping
8021WW
Open, Vertical Lamping
4-Pin (Amalgam)
8031
Open, Horizontal Lamping
8081
Open, Horizontal Lamping
8091CB
Louvered, Horizontal Lamping
8046
Lensed, Horizontal Lamping
/