1
4
5
2
3
6
Quick Install Guide Symmetrix Lavatory Faucet, SLS-2012 Series
Model Number
SLS-2012-DP4-RP
Lavatory faucet with lift rod and pop-up
drain assembly, p/n LN-01299
Need Help?
Contact Symmons customer service at
(800) 796-6667, (781) 848-2250
Email: [email protected]
Monday - Friday 7:30 am - 7:00 pm EST
Please check Symmons website
for technical help, the latest product
information and warranty policy.
www.symmons.com/service
Tools & Materials
Installation and Service Instructions
Symmetrix
™
Lavatory Faucet SLS-2012-DP4-RP
Decorative Finish Code
Append to part numbers when applicable
--
Chrome (standard)
If replacing an older faucet ensure water supply is
turned OFF before removing, then open faucet valves
to relieve water pressure.
1 2 3
1/2"
(13 mm)
PLUMBERS
PUTTY
ange
beveled
washer
friction
washer
ange nut
back
of sink
*
ange washer
(optional)
*
use included ange
washer only when
plumbers putty is
not available
Page 2
1
2
3
4
Installation Instructions
Use mild soap and water or non-abrasive cleaner to clean
finished area and then rinse immediately. A non-abrasive wax
may be used to preserve finish area.
Valve cartridge replacement
COLD
HOT
Care of faucet finish
2.5 mm
2.5 mm
Page 3
5
6
Aerator & retainer
1.5 gpm (5.7 L/min)
Cartridge
Part Number Item
Replacement Parts
LN-01417
FLR-110-1.5
Handle kit
plug button
Allen screw
handle
LN-01449
Parts Assembly
Symmetrix Lavatory Faucet, SLS-2012-DP4-RP
pop-up drain
assembly
faucet body
aerator
1.5 gpm (5.7L/min)
retainer
4 inch deck plate
and gasket
Ordering replacement parts:
Call Symmons customer service at (800) 796-6667,
(781) 848-2250 M-F 7:30 am - 7:00 pm EST or
check our website at
ww.symmons.com
for a list
of Symmons distributors.
COLD: blue stripe
HOT: red stripe
cap
retainer
cartridge
plug button
handle
Allen screw
u-gasket
u-metal washer
threaded stud
long hex nut
2.5 mm Allen wrench
(not included)
2.5 mm Allen wrench
required (not included)
hose connections
3/8" compression
lift rod
base gasket
2-15/16"
(75 mm)
3"
(77 mm)
3/8" compression
3/16"
(5 mm)
Deck plate
5-7/8" (150 mm)
2" (50 mm)
Deck thickness
1-3/4" (46 mm) max
4"
(101 mm)
5-5/16"
(135 mm)
Hole size
1-1/2" (38 mm)
Deck
plate
6-1/2"
(165 mm)
Note:
(1) Dimensions subject to change
without notice.
Dimensions Symmetrix Lavatory Faucet, SLS-2012-DP4-RP
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ ©2012 Symmons Industries, Inc. ■ Printed in U.S.A.
(800)796-6667, (781)848-2250 ■ Fax: (800)961-9621, (781)664-1300 ■ www.symmons.com ■ customerservice@symmons.com
Model# SLS-2012-DP4-RP ■ p/n LN-01299 ■ Document# ZV-1080 ■ RevDate 110713
/