Symmons SLS-2012-1.5 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Symmons SLS-2012-1.5 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
1
4
5
2
3
6
Quick Install Guide Symmetrix Lavatory Faucet, SLS-2012 Series
Model SLS-2012
with optional deck plate
Plumbers
Putty
Model Numbers
SLS-2012...
Lavatory faucet with lift rod
and pop-up drain assembly
p/n LN-01299
SLS-2011...
Lavatory faucet with lift rod
p/n LN-01299
SLS-2010...
Lavatory faucet only
p/n LN-01300
Need Help?
Contact Symmons customer service at
P:(800) 796-6667, F:(800) 961-9621
Monday - Friday 7:30 am - 7:00 pm EST
Please check Symmons website
for technical help, the latest product
information and warranty policy.
www.symmons.com/service
Tools & Materials
Installation and Service Instructions
Symmetrix
Lavatory Faucet SLS-2012 Series
Decorative Finish Code
Append three letter finish suffix code to part
numbers when applicable
--
Chrome (standard)
If replacing an older faucet ensure water supply is
turned OFF before removing, then open faucet valves
to relieve water pressure.
1 2 3
1/2"
(13 mm)
PLUMBERS
PUTTY
ange
beveled
washer
friction
washer
ange nut
back
of sink
*
ange washer
(optional)
*
use included ange
washer only when
plumbers putty is
not available
Page 2
1
2
3
4
Installation Instructions
Use mild soap and water or non-abrasive cleaner to clean
finished area and then rinse immediately. A non-abrasive wax
may be used to preserve finish area.
Valve cartridge replacement
COLD
HOT
Care of faucet finish
2.5 mm
2.5 mm
Page 3
5
6
Aerator & retainer
2.2 gpm (8.3 L/min)
1.5 gpm (5.7 L/min)
1.0 gpm (3.8 L/min)
0.5 gpm (1.9 L/min)
Cartridge
Part Number Item
Replacement Parts
LN-01417
LN-15
*
FLR-110-1.5
*
FLR-110-1.0
*
RL-071*
Handle kit
plug button
Allen screw
handle
LN-01449
*
2.5 mm Allen wrench
required (not included)
Lift rod
P-108
*
Note: For decorative nish faucets append the
appropriate sufx code letters to part numbers
marked with an asterisk (
*
)
Parts Assembly Symmetrix Lavatory Faucet, SLS-2012 Series
pop-up drain
assembly
(SLS-2012 only)
faucet body
aerator
2.2 gpm (8.3L/min)
retainer
4 inch deck plate
and gasket (optional)
Ordering replacement parts:
Call Symmons customer service at (800) 796-6667
M-F 7:30 am - 7:00 pm EST or check our website at
ww.symmons.com
for a list of Symmons distributors.
ex supply hose
COLD: blue stripe
HOT: red stripe
cap
retainer
cartridge
plug button
handle
Allen screw
u-gasket
u-metal washer
threaded stud
long hex nut
2.5 mm Allen wrench
(not included)
hose connections
3/8" compression
lift rod
(SLS-2011)
(SLS-2012)
base gasket
Faucet without
deck plate
base gasket
base ring
gasket
Note: Model SLS-2012 shown
with optional deck plate
2-15/16"
(75 mm)
3"
(77 mm)
3/8" compression
3/16"
(5 mm)
Deck plate
5-7/8" (150 mm)
2" (50 mm)
Deck Thickness
1-3/4" (46 mm) max
4"
(101 mm)
5-5/16"
(135 mm)
Hole size
1-1/2" (38 mm)
Deck
plate
6-1/2"
(165 mm)
Note:
(1) Model SLS-2012 drawing
shown with optional deck plate
(2) Dimensions subject to change
without notice.
Dimensions Symmetrix Lavatory Faucet, SLS-2012 Series
SLS-2012, faucet p/n LN-01299 - with lift rod and drain
SLS-2011, faucet p/n LN-01299 - with lift rod only
SLS-2010, faucet p/n LN-01300 - faucet only
Symmons Industries, Inc. 31 Brooks Drive Braintree, MA 02184 Phone: (800)796-6667 Fax: (800)961-9621
©2014 Symmons Industries, Inc. Printed in U.S.A. www.symmons.com [email protected] ZV-1071 120514
/