Pioneer FH-P8900MD User manual

Operation Manual

DEH-P9100R

Manual de Operación

ENGLISH

DEUTSCH FRANÇAIS

ITALIANO NEDERLANDS

Multi-CD control DSP High power

CD/MD player with FM/AM tuner

Owner’s Manual

FH-P8900MD

This product conforms to new cord colors.

1
Contents
Key Finder .................................. 3
Before Using This Product  .............. 4
About this manual  .............................................. 4
Precaution .......................................................... 4
Playback of MDs featuring long recordings   ...... 4
Resetting the microprocessor  ............................ 5
About the demo mode ........................................ 5
About basic displays  .......................................... 5
Remote controller and care  ................................ 6
Using the remote controller ................................ 7
Basic Operation  .......................... 8
Turning a source on or off .................................. 8
Setting the display angle  .................................... 8
SOFT KEY operation  .......................................... 9
Key guidance indicator  .................................... 11
PGM button functions  ......................................11
Tuner ...................................... 12
Display and indicators ...................................... 12
Basic operation  ................................................ 12
Storing and recalling broadcast stations  .......... 13
Tuner function menu ........................................ 13
Storing the strongest broadcast stations .......... 13
Selecting stations from the preset 
channel list ................................................ 14
Tuning in strong signals  .................................. 14
Built-in CD Player  ...................... 15
Display and indicators ...................................... 15
Basic operation  ................................................ 15
Switching and scrolling the title  ...................... 16
Built-in CD player function menu ...................... 16
Repeating play .................................................. 16
Playing tracks in random order  ........................ 17
Scanning tracks of a CD  .................................. 17
Selecting tracks from the track title list  ............ 17
Pausing CD playback ........................................ 18
Entering disc titles ............................................ 18
Built-in MD Player  ...................... 19
Display and indicators ...................................... 19
Basic operation  ................................................ 19
Switching and scrolling the title  ...................... 20
Built-in MD player function menu  .................... 20
Repeating play .................................................. 20
Playing tracks in random order  ........................ 21
Scanning tracks of an MD  ................................ 21
Selecting tracks from the track title list  ............ 21
Pausing MD playback  ...................................... 22
Multi-CD Player .......................... 23
Display and indicators ...................................... 23
50-disc multi-CD player .................................... 23
Basic operation  ................................................ 23
Selecting a disc directly .................................... 23
Switching and scrolling the title  ...................... 24
Multi-CD player function menu  ........................ 24
Repeating play .................................................. 24
Playing tracks in random order  ........................ 25
Scanning CDs and tracks  ................................ 25
Selecting tracks from the track title list  ............ 25
Selecting discs from the disc title list  .............. 26
Pausing CD playback ........................................ 26
Entering disc titles ............................................ 26
Using compression and dynamic bass 
emphasis .................................................. 27
Using ITS memory  .......................................... 27

TV Tuner  .................................. 29
Display and indicators ...................................... 29
Basic operation  ................................................ 29
Storing and recalling broadcast stations  .......... 29
Changing a band  .............................................. 30
TV tuner function menu .................................... 30
Selecting channels from the preset 
channel list ................................................ 30
Audio Adjustments  ...................... 31
Adjusting the audio easily  ................................ 31
Adjusting the audio finely  ................................ 31
Extra functions  ................................................ 31
Recalling equalizer curves ................................ 31
Audio menu ...................................................... 32
Using balance adjustment  ................................ 32
Using loudness  ................................................ 32
Using sound field control, octaver and BBE 
sound ........................................................ 32
Adjusting equalizer curves ................................ 33
Adjusting 13-band graphic equalizer  ................ 33
Using position selector  .................................... 34
Using time alignment  ...................................... 35
Using subwoofer output  .................................. 35
Using the high pass filter .................................. 36
Adjusting source levels  .................................... 37
Using the auto-equalizer  .................................. 37
Switching the digital attenuator ........................ 37
Creating the auto-equalizer curve  .................... 37
Initial Settings  .......................... 40
Initial settings menu  ........................................ 40
Using reverse mode  ........................................ 40
Using the feature demo  .................................... 40
Switching the auxiliary setting .......................... 40
Switching the telephone muting/attenuation 
setting ...................................................... 41
Setting preout output  ...................................... 41 
Setting the FM tuning step  .............................. 41
Setting the AM tuning step  .............................. 41
Other Functions .......................... 42
Attenuating volume  .......................................... 42
Displaying and setting the clock  ...................... 42
Changing the display form  .............................. 43
Adjusting the brightness  .................................. 43
Switching the dimmer setting  .......................... 43
Selecting the wall paper pattern  ...................... 43
Setting the entertainment display  .................... 43
Using the AUX source  ...................................... 44
Additional Information  ................ 45
CD player and care  .......................................... 45
MD player and care  .......................................... 46
Understanding built-in CD player error 
messages .................................................. 47
Understanding built-in MD player error 
messages .................................................. 47
Understanding auto-equalizing error 
messages .................................................. 48
Connecting the units  ........................................ 49
Installation ........................................................ 53
Specifications .................................................. 55
2
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS

Key Finder

3

Head unit

Remote Controller

A remote controller that enables remote operation of the head unit is supplied. Operation is

the same as when using buttons on the head unit.

MD EJECT button

CD EJECT button

SOURCE selector

PGM button

ANGLE buttons

BACK button

Multi-function buttons

BAND button

NEXT button

VOLUME

5/∞/2/3 buttons

RESET button

FUNCTION button

2/3 buttons

SOURCE button

5/∞ buttons

AUDIO button

VOLUME

Raise or lower

the volume

BAND button

ATT button

This lets you quickly lower volume level (by about 90%).

Press once more to return to the original volume level.

PGM button

4

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

ITALIANO NEDERLANDS

Before Using This Product

About this manual

This product features a number of sophisticated

functions ensuring superior reception and oper-

ation. All are designed for the easiest possible

use, but many are not self-explanatory. This

operation manual is intended to help you bene-

fit fully from their potential and to maximize your

listening enjoyment.

We recommend that you familiarize yourself

with the functions and their operation by read-

ing through the manual before you use this

product. It is especially important that you read

and observe the “Precaution” on this page and

in other sections.

This manual explains head unit operation. You

can perform the same operations with the

remote controller.

Precaution

• Keep this manual handy as a reference for

operating procedures and precautions.

• Always keep the volume low enough for out-

side sounds to be audible.

• Protect the product from moisture.

• If the battery is disconnected, the preset

memory will be erased and must be repro-

grammed.

• Should this product fail to operate properly,

contact your dealer or nearest authorized

Pioneer Service Station.

Playback of MDs featuring long

recordings

This product is MDLP* compatible, so you can

playback MDs featuring long recordings.

* MDLP is a data compression system that lets

you record on regular MDs for 2 or 4 times the

length of time previously possible.

CAUTION: USE OF CONTROL OR

ADJUSTMENT OR PER-

FORMANCE OF PROCE-

DURES OTHER THAN

THOSE SPECIFIED

HEREIN MAY RESULT IN

HAZARDOUS RADIATION

EXPOSURE.

CAUTION: THE USE OF OPTICAL

INSTRUMENTS WITH

THIS PRODUCT WILL

INCREASE EYE HAZARD.

5

Before Using This Product

Resetting the microprocessor

The microprocessor must be reset under the

following conditions:

When using this product for the first time after

installation.

When the machine fails to operate properly.

When strange (incorrect) messages appear on

the display.

• To reset the microprocessor, press

RESET on the head unit with a pen tip or

other pointed instrument.

About the demo mode

This product features two demonstration

modes. One is the reverse mode and the other

is the feature demo mode.

Reverse mode

If you do not carry out an operation within about

30 seconds, screen indications will start to

reverse, and then continue reversing every 10

seconds. Pressing the button 5 when power to

this product is switched off while the ignition

switch is set to ACC or ON cancels the reverse

mode. Press the button 5 again to start the

reverse mode.

Feature demo

The feature demo automatically starts when

power to this product is switched off while the

ignition switch is set to ACC or ON. Pressing

the button 6 during feature demo operation can-

cels the feature demo mode. Press the button 6

again to start the feature demo mode.

Remember that if the feature demo continues

operating when the car engine is switched OFF,

it may drain battery power.

Note:

• The red lead (ACC) of this product should be con-

nected to a terminal coupled with ignition switch ON

or OFF operations. If this is not done, the vehicle

battery may be drained.

• When the source is off, you can check the location

of “5” and “6” by turnig on the feature demo.

About basic displays

This product is equipped with two forms of

basic display. You can select the desired dis-

play.

FORM 1

FORM 2

Note:

• For details, refer to “Changing the display form” on

page 43.

6

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

ITALIANO NEDERLANDS

Remote controller and care

Batteries

• Remove the cover on the back of the

remote controller and insert the batteries

with the (+) and (–) poles pointing in the

proper direction.

Precaution:

• Use only AAA or IEC R03 1.5 V batteries.

• Remove the batteries if the remote controller is not

used for a month or longer.

• Do not attempt to recharge the supplied batteries.

• Do not mix new and used batteries.

• If the event of battery leakage, wipe the remote con-

troller completely clean and install new batteries.

• When disposing of used batteries, please comply

with governmental regulations or environmental

public institution’s rules that apply in your

country/area.

7

Before Using This Product

Using the remote controller

This product is equipped with a remote con-

troller for convenient operation.

• Point the remote controller in the direction of

the front panel to operate.

Precaution:

• Do not store the remote controller in high tempera-

tures or direct sunlight.

• The remote controller may not function properly in

direct sunlight.

• Do not let the remote controller fall onto the floor,

where it may become jammed under the brake or

accelerator pedal.

• If you press the FUNCTION button on the remote

controller while pressing the BAND button on it, the

remote controller will not function properly. To can-

cel this setting, press the AUDIO button on the

remote controller while pressing the BAND button

on it to return to the previous setting.

FUNCTION button and AUDIO button

Operation of the FUNCTION button and the

AUDIO button on the remote controller differs

from the operation of the FUNC button and the

AUDIO button on the head unit. When operat-

ing the head unit, use the FUNC button and the

AUDIO button to select the appropriate menu,

then use the multi-function buttons to select the

mode. When operating the remote controller,

however, switch through the modes as

described below to select the mode.

FUNCTION button operation

• Press FUNCTION to select the desired

mode (e.g., built-in CD player).

Press FUNCTION repeatedly to switch

between the following modes:

RPT = RDM = SCAN = T.LIST = PAUSE

= TTLin

Note:

• Refer to “Built-in CD player function menu” on page

16.

AUDIO button operation

• Press AUDIO to select the desired mode.

Press AUDIO repeatedly to switch between

the following modes:

F/B = LOUD = SFC = EQ1 = EQ2

= POSI = T.AL1 = T.AL2 = SW1

= SW2 = HPF F = HPF R = SLA

= A.EQ = D.ATT

Note:

• Refer to “Audio menu” on page 32.

Basic Operation

Turning a source on or off

You can select the source you want to listen to.

To switch to built-in CD/MD player, load a

CD/MD in this product. (Refer to “Basic opera-

tion” on page 15 and 19.)

1. Press (up or down) SOURCE to select the

desired source (e.g., tuner).

Press (up or down) SOURCE repeatedly to

switch between the following sources:

Built-in CD player Ô TV tuner Ô Tuner

Ô Built-in MD player Ô Multi-CD player

Ô External unit 1 Ô External unit 2

Ô AUX Ô SOURCE OFF

2. Press (up or down) VOLUME to adjust the

volume.

3. Press (up or down) SOURCE to select the

source off.

You can also turn the source off by pressing

and holding SOURCE button on the remote

controller.

Note:

• External unit refers to a Pioneer product (such as

one available in the future) that, although incompat-

ible as a source, enables control of basic functions

by this product. Two external units can be con-

trolled by this product, although “External” is dis-

played whether you select external unit 1 or external

unit 2. When two external units are connected, the

allocation of them to external unit 1 or external unit

2 is automatically set by this product.

• In the following cases, the sound source will not

change:

* When no product corresponding to the source is

connected to this product.

* No disc is set in this product.

* No magazine is set in the multi-CD player.

* AUX (auxiliary setting) is set to off. (Refer to page

40.)

• When this product’s blue lead is connected to the

car’s Auto-antenna relay control terminal, the car’s

Auto-antenna extends when this product’s source is

selected the tuner. To retract the antenna, switch

the sources other than tuner.

Setting the display angle

You can adjust front panel angle for easier

operation.

• Select the desired angle.

«

Note:

• Pressing and holding ANGLE (∞) fully opens the

front panel. Pressing and holding ANGLE (5) com-

pletely closes the front panel.

WARNING:

• Do not use with the front panel left fully open.

If you do leave it open, it may result in injury in

the event of an accident.

• Be careful not to catch your finger in the front

panel when it is opening or closing.

Each press changes the angle.

8

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

ITALIANO NEDERLANDS

9

Basic Operation

SOFT KEY operation

SOFT KEY operation means that the function of

a button changes as indicated on the display.

The multi-function buttons provide SOFT KEY

operation; the functions performed by the but-

tons change according to the function or setting

that has been selected.

The explanations given in this manual are

based on FORM 1 display. If you have selected

FORM 2, the functions of some of the multi-

function buttons may be different from those

indicated in the manual.

Important

In this manual, for operations using the multi-

function buttons the function displayed is used

as the name of the function button.

Switching the function of the multi-func-

tion buttons

The “3” indicator shows that the multi-function

buttons have functions other than those current-

ly displayed. When this indicator is visible,

press NEXT to switch through the functions of

the multi-function buttons.

• Press NEXT to display the desired func-

tions (e.g., built-in CD player).

Press NEXT repeatedly to switch between

the following functions:

«

Note:

• The number of functions or displays switched

through will differ according to the source or menu

selected.

• When no function is indicated for a button, that but-

ton is not currently active.

Multi-function buttons

Function names “3”

10

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

ITALIANO NEDERLANDS

Display example (e.g., built-in CD player)

Example of multi-function button opera-

tion

Here the “random play” function of the built-in

CD player is used as an example to illustrate

operation of the multi-function buttons.

1. Press NEXT to display “FUNC”.

Press NEXT repeatedly until “FUNC”

appears.

2. Press FUNC to enter the function menu.

With the switch to the function menu, the

functions of the multi-function buttons also

change simultaneously.

3. Press RDM to select the random mode.

4. Press RDM to turn random play on.

• Press RDM again to turn random play off.

The light goes off.

The light illuminates.

11

Basic Operation

Key guidance indicator

This product’s display features key guidance

indicators. These light to indicate which of the

5/∞/2/3 buttons you can use. When you are

in the function menu, audio menu or the other

menus, they also make it easy to see which

5/∞/2/3 buttons you can use to switch func-

tions on/off, switch repeat selections and per-

form other operations.

Note:

• In this manual, operation for each mode is given

mainly in terms of the multi-function buttons.

However, in each mode, when the key guidance

indicators are lit it is also possible to use 5/∞/2/3

to operate the mode.

Key guidance indicators

PGM button functions

The following chart shows functions for each source by pressing PGM.

For more details, or when you want to know about an operation, refer to the page number indicated

in the chart.

Source Function name Page

Tuner Best Stations Memory (OFF) 13

Best Stations Memory (ON)

(Hold for 2 seconds) 13

Built-in MD player Pause 22

Built-in CD player Pause 18

Multi-CD player Pause 26

TV Best Station Sequential Memory (OFF) 30

Best Station Sequential Memory (ON)

(Hold for 2 seconds) 30

Basic Operation

Display and indicators

FORM 1

FORM 2

qBand

wLOC indicator

ePreset number

rFrequency

tStereo indicator

Basic operation

Reset the AM tuning step from 9 kHz (the facto-

ry preset step) to 10 kHz when using the tuner

in North, Central or South America. (Refer to

page 41.)

1. Press (up or down) SOURCE to select the

tuner.

Press (up or down) SOURCE until “Tuner”

appears.

2. Press (up or down) VOLUME to adjust the

volume.

3. Press BAND to select the desired band.

Press BAND repeatedly to switch between

the following bands:

FM-1 = FM-2 = FM-3 = AM

4. Press 2 or 3 to tune in to a station.

The frequencies move up or down step by

step.

• If you press and hold 2 or 3 for about one

second and release, you can perform seek

tuning. Seek tuning lets you skip broad-

casting stations until a broadcast strong

enough for good reception is found.

• If you press and hold 2 or 3, you can skip

broadcasting stations. Seek tuning starts

as soon as you release the button.

Note:

• The stereo indicator “” lights when a stereo sta-

tion is selected.

qwe

r

t

qwe

tr

12

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

ITALIANO NEDERLANDS

Tuner

13

Tuner

Storing and recalling broadcast

stations

If you press any of the buttons 1 – 6, you can

easily store up to six broadcast stations for later

recall.

Storing broadcast stations

1. Press NEXT to display “1” – “6”.

Press NEXT until “1” – “6” appears.

2. When you find a station that you want to

store in memory, press and hold any of

the buttons 1 – 6 until the preset number

stops flashing.

The station is stored in memory under the

selected button.

Note:

• Up to 18 FM stations, six for each of the three FM

bands, and six AM stations can be stored in memo-

ry.

Recalling broadcast stations

1. Press NEXT to display “1” – “6”.

Press NEXT until “1” – “6” appears.

2. Press any of the buttons 1 – 6 to recall a

station preset under that button.

Note:

• You can also use 5 or ∞ to recall broadcast sta-

tions memorized in the buttons 1 – 6.

Tuner function menu

The tuner function menu has the following func-

tions:

FM/AM

Note:

• If you do not operate the function within about 30

seconds, the display is automatically returned.

Storing the strongest broadcast

stations

BSM (best stations memory) lets you automati-

cally store the six strongest broadcast stations

under the buttons 1 – 6.

1. Press FUNC to select the BSM mode.

2. Press BSM to turn the BSM on.

“Searching” appears. The six strongest

broadcast stations will be stored under the

buttons 1 – 6 and in order of their signal

strength.

When finished, “Searching” disappears and

the display switches to the preset channel

list mode.

• To cancel the storage process before it is

completed, press BSM again while

“Searching” appears.

Note:

• You can also turn BSM off by pressing PGM.

14

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

ITALIANO NEDERLANDS

Selecting stations from the pre-

set channel list

The preset channel list lets you see the list of

preset stations and select one of them to

receive.

1. Press FUNC and then press chLIST to

select the preset channel list mode.

2. Press any of the buttons 1 – 6 to recall

the desired station.

Note:

• You can also use 2 , 3 and 5 to select and recall

the desired station.

Tuning in strong signals

Local seek tuning lets you tune in only those

broadcast stations with sufficiently strong sig-

nals for good reception.

1. Press FUNC and then press LOC to

select the local mode.

2. Press LOC to set the local seek sensitivi-

ty.

Press LOC repeatedly to switch between the

following settings:

FM: Local OFF = Level 1 = Level 2

= Level 3 = Level 4

AM: Local OFF = Level 1 = Level 2

• When the local mode is exited except for

“Local OFF” is selected, “LOC” appears on

the basic display.

Note:

• The “Level 4” setting allows reception of only the

strongest stations, while lower settings let you

receive progressively weaker stations.

15

Built-in CD Player

Display and indicators

FORM 1

FORM 2

qSource name

wTrack number

eDisc title

rPlay time

tTrack title

Basic operation

The built-in CD player plays one standard 12

cm or 8 cm (single) CD at a time. Do not use an

adapter when playing an 8 cm CD.

1. Press CD EJECT to open the front panel.

2. Insert a CD into the CD loading slot.

When a CD is inserted, the front panel clos-

es automatically.

3. Press (up or down) VOLUME to adjust the

volume.

4. Press 2 or 3 to select a track.

Pressing 3 skips to the start of the next

track.

Pressing 2 once skips to the start of the cur-

rent track. Pressing again will skip to the

previous track.

• If you press and hold 2 or 3, you can per-

form fast forward or reverse.

5. Press CD EJECT to eject the CD.

The front panel opens and the CD is ejected.

• Be sure to close the front panel by press-

ing CD EJECT after removing the CD.

Note:

• You can select CD as the source by pressing (up

or down) SOURCE when a disc is loaded in this

product.

• Do not insert anything other than a CD into the CD

loading slot.

• A CD left partially inserted after ejection may incur

damage or fall out.

• If a CD cannot be inserted fully or playback fails,

make sure the recorded side is down. Press the

CD EJECT and check the disc for damage before

reinserting it.

• If the built-in CD player cannot operate properly, an

error message (such as “ERROR-14”) appears on

the display. Refer to “Understanding built-in CD

player error messages” on page 47.

• You can eject the CD by pressing and holding CD

EJECT with opening the front panel when the CD

loading or ejecting cannot operate properly.

• When you load a CD TEXT disc or switch from

another source to the built-in CD player when a CD

TEXT disc is loaded, disc and track titles are auto-

matically scrolled once in the display. When you

select a track, the track title is also automatically

scrolled once in the display. (The title of the track

you are currently listening to is not scrolled if you

return to the start of that track.)

CD loading slot

qw r

t

e

q

w

re

Switching and scrolling the title

When playing a CD TEXT disc, you can switch

text display such as artist name and track title.

With text longer than 32 letters, you can scroll

to see the rest of the text.

1. Press TITLE to switch the title mode.

2. Press the corresponding button to dis-

play the desired title.

FORM 1

Button Operation

D.TTL Displays disc title.

D.ART Displays disc artist name.

T.TTL Displays track title.

T.ART Displays track artist name.

THNDR Displays thunderbolt

animation.

SCROLL Scrolls the displayed title.

FORM 2

Button Operation

TTL1 Displays disc title and track

title.

TTL2 Displays disc title and disc

artist name.

TTL3 Displays track title and track

artist name.

SCROLL Scrolls the displayed title.

Note:

• If you do not operate the function within about eight

seconds, the display is automatically returned.

• You cannot use 2 or 3 to select a track in title

mode.

• When you select the display form 2, the titles are

displayed up to 24 letters long.

• A CD TEXT disc is a CD featuring recorded text

information such as disc title, artist name and track

title.

• If certain text information is not recorded on a CD

TEXT disc, “No ~” (e.g., “No title”) is displayed.

• If you have not input disc titles, “No title” is dis-

played.

Built-in CD player function menu

The built-in CD player function menu has the

following functions:

Note:

• If you do not operate the function within about 30

seconds, the display is automatically returned.

(When you select the disc title input mode (TTLin),

the display is not returned automatically.)

• “T.LIST” is displayed only when playing a CD TEXT

disc.

Repeating play

Repeat play lets you hear the same track over

again.

1. Press FUNC to select the repeat mode.

2. Press RPT to turn the repeat play on.

The light illuminates. The track currently

playing will play and then repeat.

• Press RPT again to turn repeat play off.

• When the repeat mode is exited while

repeat play is on, “T.RPT” appears on the

basic display.

Note:

• If you perform track search or fast forward/reverse,

repeat play is automatically canceled.

16

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

ITALIANO NEDERLANDS

17

Built-in CD Player

Playing tracks in random order

Random play lets you play back tracks on the

CD in random order.

1. Press FUNC and then press RDM to

select the random mode.

2. Press RDM to turn random play on.

The light illuminates. Tracks will play in ran-

dom order.

• Press RDM again to turn random play off.

• When the random mode is exited while

random play is on, “RDM” appears on the

basic display.

Scanning tracks of a CD

Scan play lets you hear the first 10 seconds of

each track on the CD.

1. Press FUNC and then press SCAN to

select the scan mode.

2. Press SCAN to turn scan play on.

The light illuminates. The first 10 seconds of

each track are played.

• When the scan mode is exited while scan

play is on, “SCAN” appears on the basic

display.

3. When you find the desired track, press

SCAN to turn scan play off.

The light goes off. The track will continue to

play.

• If the scan mode is automatically canceled,

select the scan mode again.

Note:

• After scanning of a CD is finished, normal playback

of the tracks will begin again.

Selecting tracks from the track

title list

The track title list lets you see the list of track

titles on a CD TEXT disc and select one of

them for playback.

1. Press FUNC and then press T.LIST to

select the track title list mode.

2. Press NEXT to display the desired track

title.

Press NEXT until the desired track title

appears.

3. Press the corresponding number button

to select the desired track title.

That selection will begin to play.

Note:

• You can also use 2, 3 and 5 to select and play

the desired track title.

• Only when playing a CD TEXT disc, you can switch

to this mode.

Pausing CD playback

Pause lets you temporarily stop playback of the

CD.

1. Press FUNC and then press PAUSE to

select the pause mode.

2. Press PAUSE to turn the pause on.

The light illuminates. Play of the current

track pauses.

• Press PAUSE again to turn the pause off.

• When the pause mode is exited while

pause is on, “PAUSE” is displayed in the

basic display.

Note:

• You can also turn pause on or off by pressing

PAUSE in the following display.

• You can also turn pause on or off by pressing PGM.

Entering disc titles

Disc title input lets you input up to 48 CD titles

up to 10 letters long into the built-in CD player.

If you input a CD title, the entered title is dis-

played.

For details of operation, refer to “Entering disc

titles” on page 26 under “Multi-CD Player”.

Note:

• When playing a CD TEXT disc, if you switch to this

mode, “No title input” is displayed and you cannot

input the title.

• After the titles for 48 discs have been entered, the

data for a new disc will overwrite the oldest one.

• If you connect a multi-CD player, you can input disc

titles for up to 100 discs.

18

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS

ITALIANO NEDERLANDS

19

Built-in MD Player

Display and indicators

FORM 1

FORM 2

qSource name

wTrack number

eDisc title

rMDLP indicator (X2 or X4)

tPlay time

yTrack title

Basic operation

You can only load one MD at a time in the Built-

in MD player. Load the MD in the direction of

the arrow, with the label side facing up.

1. Press MD EJECT to open the front panel.

2. Insert an MD into the MD loading slot.

When an MD is inserted, the front panel

closes automatically.

3. Press (up or down) VOLUME to adjust the

volume.

4. Press 2 or 3 to select a track.

Pressing 3 skips to the start of the next

track.

Pressing 2 once skips to the start of the cur-

rent track. Pressing again will skip to the

previous track.

• If you press and hold 2 or 3, you can per-

form fast forward or reverse.

5. Press MD EJECT to eject the MD.

The front panel opens and the MD is ejected.

• Be sure to close the front panel by press-

ing MD EJECT after removing the MD.

WARNING:

• Do not use with the front panel left fully open.

If the front panel is left open, it may result in

injury in the event of an accident.

Note:

• You can select MD as the source by pressing (up

or down) SOURCE when a disc is loaded in this

product.

• Do not insert anything other than an MD into the

MD loading slot.

• An MD left partially inserted after ejection may incur

damage or fall out.

• Load an MD after confirming the MD shutter (refer

to page 46) is closed.

• When you load a disc, this product reads informa-

tion recorded on the disc such as the number of

tracks. While the disc is being read, “TOC read” is

indicated in the display.

• If the Built-in MD player cannot operate properly, an

error message (such as “ERROR-11”) appears on

the display. Refer to “Understanding built-in MD

player error messages” on page 47.

• When you play MDs featuring long recordings, the

MDLP indicator is displayed. (Refer to “Display and

indicators” on this page.)

• When you load an MD or switch from another

source to the built-in MD player when an MD is

loaded, disc and track titles are automatically

scrolled once in the display. When you select a

track, the track title is also automatically scrolled

once in the display. (The title of the track you are

currently listening to is not scrolled if you return to

the start of that track.)

MD loading slot

qwr

y

e

t

qw

rte

Page is loading ...

Pioneer FH-P8900MD User manual

Pioneer FH-P8900MD User manual

Related papers

Other documents