Sunbeam EM0700 User manual

Category
Coffee grinders
Type
User manual

Sunbeam EM0700 Precision Grinder: Experience café-quality coffee at home with this powerful grinder. Featuring hardened steel conical burrs for consistent grind size and minimal heat transfer, it delivers a rich, aromatic flavor in every cup. Choose from 30 grind settings to suit your preferred brewing method, from fine espresso to coarse French press. The Tap & Go™ function and hands-free group handle cradle make grinding directly into your portafilter a breeze, while the LED-lit grind area ensures precise dosing.

Sunbeam EM0700 Precision Grinder: Experience café-quality coffee at home with this powerful grinder. Featuring hardened steel conical burrs for consistent grind size and minimal heat transfer, it delivers a rich, aromatic flavor in every cup. Choose from 30 grind settings to suit your preferred brewing method, from fine espresso to coarse French press. The Tap & Go™ function and hands-free group handle cradle make grinding directly into your portafilter a breeze, while the LED-lit grind area ensures precise dosing.

EM0490
PRECISION GRINDER
EM0700
2
Heading
Important instructions – retain for
future use.
Contents
Sunbeam’s Safety Precautions 2
Congratulations 3
Features of your Cafe Series
®
Precision Grinder 4
Functions of your Cafe Series
®
Precision Grinder 6
Operating your Cafe Series
®
Precision Grinder 8
Adjusting the Grind Setting 11
Care and Cleaning 12
Advanced Settings for Recalibration 14
2
Sunbeam’s Safety Precautions
SAFETY PRECAUTIONS FOR YOUR SUNBEAM
COFFEE GRINDER
• Checkthehopperforthepresenceofforeign
objectsbeforeusing.
• Alwaysoperatethegrinderwiththehopper
properlyinsertedinthegrinder.
• Donotplaceyourhandinorneartheburrs
whilethegrinderisinoperation.
• Alwaysplacetheunitonaflat,levelsurface.
• Switchoffandunplugatpowerpointbefore
cleaning.
• Donotattempttore-grindgroundcoffee.
• Switchofftheapplianceanddisconnectfrom
powersupplybeforetouchinganypartofthe
grinderthatmovesduringuse.
Sunbeam is very safety conscious when
designing and manufacturing consumer products,
but it is essential that the product user also exercise
care when using an electrical appliance. Listed
below are precautions which are essential for the
safe use of an electrical appliance:
• Readcarefullyandsavealltheinstructions
providedwithanappliance.
• Alwaysturnthepoweroffatthepoweroutlet
beforeyouinsertorremoveaplug.Removeby
graspingtheplug-donotpullonthecord.
• Turnthepoweroffandremovetheplugwhenthe
applianceisnotinuseandbeforecleaning.
• Donotuseyourappliancewithanextensioncord
unlessthiscordhasbeencheckedandtestedby
aqualifiedtechnicianorserviceperson.
• Alwaysuseyourappliancefromapoweroutletof
thevoltage(A.C.only)markedontheappliance.
• Thisapplianceisnotintendedforusebypersons
(includingchildren)withreducedphysical,
sensoryormentalcapabilities,orlackof
experienceandknowledge,unlesstheyhavebeen
givensupervisionorinstructionconcerninguse
oftheappliancebyapersonresponsiblefortheir
safety.
• Childrenshouldbesupervisedtoensurethatthey
donotplaywiththeappliance.
• Thetemperatureofaccessiblesurfacesmaybe
highwhentheapplianceisoperating.
• Neverleaveanapplianceunattendedwhile
inuse.
• Donotuseanapplianceforanypurpose
otherthanitsintendeduse.
• Donotplaceanapplianceonornearahotgas
flame,electricelementoronaheatedoven.
• Donotplaceontopofanyotherappliance.
• Donotletthepowercordofanappliancehang
overtheedgeofatableorbenchtoportouchany
hotsurface.
• Donotoperateanyelectricalappliancewitha
damagedcordoraftertheappliancehasbeen
damagedinanymanner.Ifdamageissuspected,
returntheappliancetothenearestSunbeam
AppointedServiceCentreforexamination,
repairoradjustment.
• Foradditionalprotection,Sunbeamrecommend
theuseofaresidualcurrentdevice(RCDwith
atrippingcurrentnotexceeding30mAin
theelectricalcircuitsupplyingpowertoyour
appliances.
• Donotimmersetheapplianceinwater
oranyotherliquidunlessrecommended.
•Appliancesarenotintendedtobeoperated
bymeansofanexternaltimerorseparateremote
controlsystem.
•Thisapplianceisintendedtobeusedin
householdandsimilarapplicationssuchas:staff
kitchenareasinshops,officesandotherworking
environments;farmhouses;byclientsinhotels,
motelsandotherresidentialtypeenvironments;
bedandbreakfasttypeenvironments.
Ifyouhaveanyconcernsregardingtheperformanceanduseofyourappliance,
pleasevisitwww.sunbeam.com.auorcontacttheSunbeamConsumerServiceLineon1300881861.
Ensuretheabovesafetyprecautionsareunderstood.
3
Congratulationsonthepurchaseofyour
SunbeamCafeSeries
®
PrecisionGrinder,
designedandengineeredinAustralia.
SunbeamCafeSeries
®
deliversquality,
styleandsuperiorperformancecapturing
theessenceofthecommercialkitchen.
Inspiredbyheavy-dutyequipmentfoundin
restaurants,cafesandbars,theSunbeam
CafeSeries
®
isbuilttolast.Itbringstogether
arangeofappliancesdesignedtoexpertly
createauthenticcaféfoodandbeveragesat
home.
Uncompromisingblendsofstainlesssteel
anddie-castalloycharacterisetherange.
This,combinedwithadvancedtechnology
andfunctionaldesign,guaranteethateach
productwillsurpassexpectations.
Whenmakingcoffeeregardlessofthe
brewingmethodtheflavouroftheresulting
brewdependslargelyonthequality,
freshnessandroastofthecoffeebeansused.
Otherfactorsthatcanalsoaffectthetasteof
thefinalcupincludethepurityofthebrew
water,theconditionofthegrinderandthe
actualdesignoftheburrmechanismwithin
thegrinder.
TheSunbeamCafeSeries
®
grinderfeatures
toolhardenedsteelconicalburrsforextra
longlife.Theconicalburrdesignensures
thattheparticlesizeofthecoffeeis
consistentandeven.Thisisespecially
importantforespresso,iftheparticlesizeof
thecoffeeisuniformequalamountsofthe
coffee’saromaticprofilewillbeextracted.
If,however,theparticlesizeofthecoffee
variessomeparticleswillbeover-extracted
andsomewillbeunder-extracted,resultingin
apoortastingcoffee.
Anotheradvantageoftheconicalburrdesign
isitsslowrotatingoperation.Thiscombined
withabelt-drivenmotor,minimisesheat
transfertotheburrsandthusprotectsthe
aromaticprofileofthecoffeeandultimately
enhancesthequalityoftheresultingbrew.
TheSunbeamCafeSeries
®
PrecisionGrinder
isconstructedwithqualitydie-castmetal
componentsandincludesmanyfeaturesthat
makegrindingcoffeeathomeeasysoyou
canenjoyalovelyfreshcupofcoffeeevery
time.Wehopeyouenjoyyournewcoffee
grinderandshouldyouneedanyfurther
assistancepleasedon’thesitatetocontact
theSunbeamConsumerHotlineon
Australia
1300881861
NewZealand
0800786232
Congratulations
4
Features of your Cafe Series
®
Precision Grinder
450g Bean hopper
The450gcapacitybeanhopperhasaclosurearmfor
easyremoval.Thisallowstheusertoremovethehopper
withouttakingoutthebeans.
Grind adjustment collar
Largeandeasytouse,thecollarhasarangeof
30grindsettings.Thisallowstheusertoselectafine
grindforanespressooracoarsergrindforbrewstyles
suchasplunger.Withsuchprecisesettingstheuser
controlstheparticlesizeandultimatelythequalityofthe
brew.
LED lighting
ThegrinddeliveryoutletisilluminatedwithLEDlighting
whengrindingbegins.
Tap & Go
easy use function
Grindingintothegrouphandleisseamlesswiththe
uniqueTap&Go
TM
technology.Simplypositionthegroup
handleandgentlypressdownforfreshlygroundcoffee.
Group handle cradle
Astylishandsturdymetalcradledesignedfor58mm
grouphandlesthatallowshandsfreeoperation.
Alsocomeswitha50mmgrouphandleadapter.
Grind spill tray and storage area
Positionedunderthegrindingspoutthegrindspilltray
catchesanyloosecoffeegrinds.Underneaththetrayisa
storageareafortheburrcleaningbrushand50mm
grouphandleadapter.
Rubber feet
Thenon-sliprubberfeetensurethegrinderremains
stableandpreventsslippingonthebenchtopduringuse.
5
Burr shield
Conical burrs
Thehardenedsteelconicalburrsachieve
excellentgrindconsistencyandminimises
heattransfertothecoffeeduetotheirslow
rotation.
Hopper closure arm
Stainless steel housing
Builttolast,theheavy-dutyStainlessSteel
bodyencasesapowerfulbeltdrivenmotor
andprovidesastablebasefoundationforthe
grinder.
Operation dial
Allowingbothautomaticandmanual
grinding.
Cord wrap
Cordwrapsawaytokeepbenchtopclean.
Burr cleaning brush
Strongbristleshelpsweepoutgrindsfrom
theburrs.
Features of your Cafe Series
®
Precision Grinder
50mm group
handle adapter
7
Functions of your Cafe Series
®
Precision Grinder (continued)
LED Lit Grind Area
SeamlessgrinddeliveryisassistedbyLED
illuminationthatengageswhengrinding
begins.Anautodimmingfeaturethendims
thelightwhengrindingiscomplete.
Easy clean without recalibration
Thepatentpendinggrindcartridgeenables
easyaccesstothelowerburrchamber
withoutalteringyourgrindsettings.
8
Operating your Cafe Series
®
Precision Grinder
Beforeusingthecoffeegrinder,wipethe
baseexteriorwithadampcloth.Washthe
beanhopperandhopperlidinwarmsoapy
water,thenrinseanddrythoroughly.
Note:Donotimmersethegrindcartridgein
wateroranyotherliquid.
Note: Donotplaceanypartsofthecoffee
grinderinthedishwasher.
1.Placethecoffeegrinderonadry,level
surface.
2.Toattachthebeanhopper,alignthearrow
onthehopperwiththearrowonthetopof
thegrindcartridgeandturnclockwiseto
lock.Seefigure1.
Thegrinderwillnotfunctionwithoutthe
hopperinplace.
3.Fillthebeanhopperwithcoffeebeans.
Tip:Tomaintainanevenweightbearingdown
ontheburrs,werecommendkeepingthe
hopperatleasthalffull.Thisensuresamore
consistentgrindisachieved.
Note:Thiscoffeegrinderisintendedtogrind
wholecoffeebeansonly.
4.Placethehopperlidontothebeanhopper
andopenthehopperclosurearm.
5.Ensureoperationdialisoff,plugthepower
cordintoa230-240VACpoweroutletand
switchthepoweron.
6.Selectthegrindbyturningthegrind
adjustmentcollartothedesiredsetting,
seefigure2.
Refertothegrindsettingtableonpage11to
assistyouinselectingthecorrectgrindlevel
forthedesiredbrewingmethod.
Figure 1
Figure 2
9
Operating your Cafe Series
®
Precision Grinder (continued)
For grinding into the group handle
7.Insertthegrouphandleintothegroup
handlecradleataninclinedangleplacing
thefrontedgeunderthelipofthegroup
handlecradle.Seefigure3.
Note:Thegrouphandlecradleaccepts58mm
grouphandles.Tousea50mmgrouphandle
attachtheadapterlocatedinthestoragearea
underthedriptray.
8.Turnthedialtothe‘Auto’positionand
gentlypressdownonthehandletogrind
intothebasket.Seefigure4.
Note:Withthedialat‘Auto’youhavethe
optiontoleavethegrouphandleinthegroup
handlecradlewithoutgrindingcoffee.
9.Oncethebasketisfull,removethegroup
handlefromthegrouphandlecradle.
Seefigure5.Collapsethecoffeeinthe
basketbytappingitonthebench.Repeat
thegrindingprocessuntilthedesired
amountofcoffeehasbeengroundand
tamptofinish.
Figure 3
Figure 4
Operating your Cafe Series
®
Precision Grinder
Figure 5
Figure 6
10
For hands free grinding
10.Insertthegrouphandleintothegroup
handlecradleataninclinedangle
placingthefrontedgeunderthelipof
thegrouphandlecradle.Seefigure3.
11.Tocontinuouslygrindcoffee,turnthe
dialtothe‘On’position,seefigure7.
12.Whenthedesiredamountofcoffeehas
beenground,returndialtothe‘Off’
position.
Operating your Cafe Series
®
Precision Grinder (continued)
Figure 7
11
Therangeof30grindsettingsallowsfor
precisionadjustment.Thecoffeemakerhas
controloftheparticlesizeandultimatelythe
qualityoftheresultingbrew.
Somethingstorememberwhenusingthe
coffeegrinder;
• Thesmallertheparticlesizethelongerit
willtaketogrind.
• Afterlongperiodsofusingthefiner
settingswerecommendremovingthegrind
cartridgeandsweepingawayanyresidual
coffeetoavoidclogging.SeetheCare
andCleaningsectiononpage12formore
details.
Tips
1.Selectthecorrectgrindforthebrewing
methodyouareusing.30grindsettings
areavailabletoensureprecision
adjustment.Thelowersettingsdeliver
finergrindswhilethehighersettings
delivercoarsergrinds.Itisimportant
toexperimentwiththegrindsettingsto
achievetheidealbrewthatbestsuitsyour
palate.
2.Coffeethatisgroundtoofinefora
particularbrewingprocesswillresultin
over-extractionandthecoffeewilltaste
bitter.Ontheotherhand,coffeethatistoo
coarseforaparticularbrewingmethodwill
resultinunder-extractionandthecoffee
willbethinandpoorinflavour.
3.Oncecoffeeisgrounditquicklylosesits
flavourandaroma.Forthebestresultswe
recommendyougrindbeansimmediately
priortobrewing.
4.Buyfreshwholecoffeebeansweekly.
5.Toretainfreshness,storewholecoffee
beansinanairtightcontainerinacool,
dark,dryplace.Itisnotrecommended
thatyoustorebeansinthegrinder’sbean
hopperforaprolongedperiod.
6.Toensurethebestresultsfromthecoffee
grindercleanthebeanhopperandconical
burrsregularly.
Adjusting the Grind Setting
Grind setting table
SETTING BREWING METHOD
0-7 Turkish
7-15 EspressoforCafeSeries
®
7-15 StoveTop
10-20 SyphonBrewMethod
15-30 AeroPress,DripFilter,V-60Dripper
25-30 Plunger,CleverCoffeeDripper
12
Important Notes:
• Spotsandmarksonthesurfaceofthe
burrsarepartofthehardeningprocess.
Thesemarksdonotaffecttheperformance
ofthegrinderorthetasteofthecoffee.
• Ensurethecoffeegrinderisswitchedoff
andunpluggedfromthepoweroutletprior
tocleaning.
• Donotimmersethemotorbaseofthe
coffeegrinderinwater.
• Donotimmerseanypartofthegrind
cartridgeinwateroranyotherliquid.
• Donotplaceanypartsofthecoffeegrinder
inthedishwasher.
• Donotuseabrasivecleansersorscouring
pads.
Cleaning the motor base and bean hopper
1.Closethehopperclosurearmandremove
thebeanhopperfromthemotorbase,see
figure8.Storeunusedbeansinanairtight
containertopreservetheirfreshness.
2.Wipethemotorbaseexteriorwithadamp
clothanddry.
3.Washthebeanhopperinwarmsoapy
water,thenrinseanddry.
Cleaning the burrs
Ifthecoffeegrinderisusedfrequently(every
day),theburrsneedtobecleanedevery
threeweekstoensurebestperformanceof
thecoffeegrinder.Regularcleaninghelps
theburrsachieveconsistentgrindingresults,
whichisespeciallyimportantwhengrinding
coffeeforespresso.
1.Closethehopperclosurearmandpurge
thegrinderbyturningonuntilnomore
grindscomeout.
2.Ensurethecoffeegrinderisswitchedoff
andunpluggedfromthepoweroutlet.
Removethebeanhopperfromthemotor
base,seefigure8.
3.Toremovethegrindcartridge,pressand
holddownthe‘RELEASE’buttononthe
topofthegrinderbaseandwiththeother
handholdthecartridgegriptabsandturn
anti-clockwise,seefigure9.
Note:Usingthecartridgegriptabsenables
removalofthegrindcartridgewithout
changingyourgrindsettings.
Care and Cleaning
Figure 8
Figure 9
13
Care and Cleaning (continued)
5.Liftthegrindcartridgeawayfromthe
grinderbase,seefigure10.
6.Cleanthegrindcartridgeandbottomburr
usingtheburrcleaningbrush(located
underthegrindspilltray),seefigure11.
7.Oncebothburrsarecleaned,returnthe
grindcartridgetothegrinderbasesothat
thearrowonthesideofthegrindcartridge
isalignedwiththe‘ALIGN’arrowonthe
grinderbase.Turnclockwiseuntilthearrow
onthegrindadjustmentcollarisaligned
with‘LOCK’arrowandthe‘RELEASE’
buttonpopsout.
Figure 11
Figure 10
14
Advanced Settings
Recalibration of the EM0700
To recalibrate for a coarser grind
6. Takenoteofyourcurrentgrindsetting
position.
7. Rotatethegrindadjustmentcollarto
position15onthegrindsettings,see
figure12.
8. Lifttherecalibrationreleaseleverand
removegrindadjustmentcollar,seefigure
13and14.
9.Tomakethegrindcoarser,repositionthe
collartosetting10onthegrindsettings.
10.Re-assemblethecollarbypressingdown
thefrontandthentherearensuringtwo
clicksareheard.
11.Returnthegrindsettingbacktoyour
originalgrindsettingposition.Yourgrind
willnowbecoarser.
12.Attachthehopper,openthehopper
closurearmandturnonthegrinder.
Note:Checkthenewsettingdeliversthe
requiredgrindbeforeuse.
To recalibrate for a finer grind
Note:Thegrinderisfactorysetforfine
grinding.Onlyre-calibratefinerifthe0
settingdoesnotachievethedesiredgrind
fineness.
6. Rotatethegrindadjustmentcollarto
position15onthegrindsettings,
seefigure12.
7. Lifttherecalibrationreleaseleverand
removegrindadjustmentcollar,seefigure
13and14
8. Tomakethegrindfiner,repositionthe
collartosetting17onthegrindsettings.
9.Re-assemblethecollarbypressingdown
thefrontandthentherearensuringtwo
clicksareheard.
10.Attachthehopperandrunthegrinderto
ensuresmoothoperation.
Caution:Re-calibratingtoofinemaycause
burrstocollideresultinginametallic
grindingnoise.Ifthisoccursturnoffthe
grinderandmovetoacoarsersetting(a
settingtowards30)orre-calibratefora
coarsergrind.
11.Openhopperclosurearmandadjust
grindsettingstodeliverrequiredgrind
size.
Note:Furthertuningmayberequired.
Note:Recalibrationwillchangeallprevioussettingsonthegrinder
1. Closehopperclosurearm.
2. Purgebeansthroughthegrinder.
3. Turntheoperationdialtothe‘off’position.
4. Disconnecttheplugfromthepowersocket.
5. Removethebeanhopperbyturninganticlockwise.
15
Figure 12
Figure 13
Advanced Settings (continued)
Figure 14
The Sunbeam
5 Year Motor
Guarantee
Sunbeam has built its reputation
on manufacturing quality electrical
appliances. Our Cafe Series
®
Precision
Grinder (EM0700) is
constructed from the
highest quality materials. So much so, we
guarantee our Precision Grinder’s motor
for five (5) years against faulty materials
or manufacture. This guarantee is just
another expression of our confidence in
the way we make appliances at Sunbeam.
In order to be eligible for this guarantee,
you must retain your receipt as proof of
purchase.
Your Cafe Series
®
Coffee Precision Grinder
(EM0700) is
covered for the first year
against faulty material or manufacture
by the Sunbeam 12 Month Replacement
Guarantee. Should you experience any
difficulties with your appliance within
this 12 Month period, please phone our
customer service line for advice on 1300
881 861 in Australia, or 0800 786 232 in
New Zealand.
The Sunbeam (5) five year motor guarantee
begins from date of purchase and extends
for four years beyond the 12 Month
Replacement Guarantee. It covers only
the motor, guaranteeing it against faulty
materials or manufacture. It does not cover
damage caused by accident, misuse or
being used in a manner not in accordance
with the Instruction Book. Similarly, this
motor guarantee does not cover freight or
any other costs incurred in making a claim.
If a fault should develop with the motor
after the period covered by the 12 Month
Replacement Guarantee, please call
Sunbeam Customer Service on the number
listed below or send a written claim to
Sunbeam at the address listed below.
On receipt of your claim, Sunbeam will
advise you on how to obtain a replacement
motor if your motor is defective.
Alternatively, you can return the Cafe
Series
®
Coffee Precision Grinder (EM0700)
to any of Sunbeam’s authorised service
centres, together with your receipt. The
service centre will examine the motor and
if it is faulty or defective, the motor will be
replaced free of charge.
For a complete list of Sunbeam’s authorised
service centres visit our website or call:
Sunbeam Corporation Ltd.
Australia
www.sunbeam.com.au
1300881861
Units 5 & 6, 13 Lord Street
Botany NSW 2019 Australia
Sunbeam Corporation Ltd.
New Zealand
www.sunbeam.co.nz
0800786232
26 Vestey Drive, Mt Wellington
Auckland, New Zealand
The benefits given to you by this guarantee
are in addition to your other rights and
remedies under any laws which relate to
the appliance.
Our goods come with guarantees that
cannot be excluded under the Australian
Consumer Law and under the New Zealand
Consumer Guarantees Act. In Australia you
are entitled to a replacement or refund for
a major failure and for compensation for
any other reasonably foreseeable loss or
damage. You are also entitled to have the
goods repaired or replaced if the goods fail
to be of acceptable quality and the failure
does not amount to a major failure.
IMPORTANT NOTE
Sunbeam agrees to replace the motor in
the event of the motor developing a fault or
defect, within the four years after the
12 Month Replacement Guarantee.
As your Cafe Series
®
Precision Grinder
(EM0700)
needs to be assessed at a
Sunbeam authorised service centre, it will
not be accepted through retail stores.
If using the Cafe Series
®
Coffee Precision
Grinder (EM0700)
for commercial use this
motor guarantee is limited to 12 months
from the date of purchase.
Shouldyouexperienceanydifficultieswithyour
productduringthewarrantyperiod,pleasecontact
ourcustomerservicelineforadviceon1300881 861
inAustralia,or0800786232inNewZealand.
Alternatively,youcansendawrittenclaimto
Sunbeamto:
Australia
Units5&6,13LordStreet
BotanyNSW2019Australia
New Zealand
26VesteyDrive
MtWellington,AucklandNewZealand
Uponreceiptofyourclaim,Sunbeamwillseekto
resolveyourdifficultiesor,iftheproductisdefective,
adviseyouonhowtoobtainareplacementorrefund.
Toassistusinmanagingwarrantyclaims,we
recommendyouregisteryourproductassoonas
practicableafterpurchasebycreatingaMySunbeam
accountonourwebsiteandsendacopyofyour
originalreceipttoSunbeam.
Inordertomakeaclaimunderourwarranty,youmust
havetheoriginalproofofpurchasedocumentationfor
theproductandpresentitwhenrequested.
Shouldyourproductdevelopanydefectwithin
12monthsofpurchasebecauseoffaultymaterials
orworkmanship,wewillreplaceorrepairit,atour
discretion,freeofcharge.Aproductpresentedfor
repairmaybereplacedbyarefurbishedproduct
ofthesametyperatherthanbeingrepaired.
Refurbishedpartsmaybeusedtorepairtheproduct.
Ourreplacementorrepairwarrantyonlyapplies
whereadefectarisesasaresultoffaultymaterial
orworkmanshipduringthewarrantyperiod.Your
warrantydoesnotcovermisuseornegligenthandling
(includingdamagecausedbyfailingtousethe
productinaccordancewiththisinstructionbooklet),
accidentaldamage,ornormalwearandtear.
Yourwarrantydoesnot:
• coverfreightoranyothercostsincurredin
makingaclaim,consumableitems,accessories
thatbytheirnatureandlimitedlifespanrequire
periodicrenewal(suchasfiltersandseals)orany
consequentiallossordamage;or
• coverdamagecausedby:
- powersurges,powerdips,voltagesupplyproblems,
oruseoftheproductonincorrectvoltage;
- servicingormodificationoftheproductotherthan
bySunbeamoranauthorisedSunbeamservice
centre;
- useoftheproductwithotheraccessories,
attachments,productsupplies,partsordevices
thatdonotconformtoSunbeamspecifications;or
- exposureoftheproducttoabnormallycorrosive
conditions;or
• extendbeyond3monthsiftheproductisused
incommercial,industrial,educationalorrental
applications.
The benefits given to you by our warranty are in addition
to other rights and remedies under law in relation to the
product.
In Australia our goods come with guarantees that cannot
be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure
and for compensation for any other foreseeable loss or
damage. You are also entitled to have the goods repaired
or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
Our goods also come with guarantees that cannot be
excluded under the New Zealand Consumer Guarantees
Act.
Ifyourwarrantyclaimisnotaccepted,wewillinform
youandifrequestedtodosobyyou,repairthe
productprovidedyoupaytheusualchargesforsuch
repair.Youwillalsoberesponsibleforallfreightand
othercosts.
Shouldyourproductrequirerepairorserviceafterthe
warrantyperiod,contactyournearestSunbeamservice
centre.ForacompletelistofSunbeam’sservice
centres,visitourwebsiteorcallourcustomerservice
lineforadviceon1300881861inAustralia,
or0800786232inNewZealand.
This Sunbeam product is covered by a 12 month replacement or repair
warranty, which is in addition to your rights under the Australian Consumer
Law (if your product was purchased in Australia) or New Zealand Consumer
Guarantees Act (if your product was purchased in New Zealand).
12 Month Warranty
is a registered trademark.
Need help with your appliance?
Contactourcustomerserviceteamorvisit
ourwebsiteforinformationandtipson
gettingthemostfromyourappliance.
In Australia
Visit www.sunbeam.com.au
Or call 1300 881 861
In New Zealand
Visit www.sunbeam.co.nz
Or call 0800 786 232
‘CafeSeries’isatrademarksofSunbeamCorporation.
Made in China.
Due to minor changes in design or otherwise,
the product may differ from the one shown in this leaflet.
© Copyright.
Sunbeam Corporation Limited 2013.
ABN 45 000 006 771
Sunbeam Corporation is a division of GUD Holdings Ltd.
Units 5 & 6, 13 Lord Street
Botany NSW 2019 Australia
Unit 3, Building D
26 Vestey Drive
Mt Wellington Auckland
New Zealand
Sunbeam Corporation is a division of GUD Holdings Ltd.
5/13
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19

Sunbeam EM0700 User manual

Category
Coffee grinders
Type
User manual

Sunbeam EM0700 Precision Grinder: Experience café-quality coffee at home with this powerful grinder. Featuring hardened steel conical burrs for consistent grind size and minimal heat transfer, it delivers a rich, aromatic flavor in every cup. Choose from 30 grind settings to suit your preferred brewing method, from fine espresso to coarse French press. The Tap & Go™ function and hands-free group handle cradle make grinding directly into your portafilter a breeze, while the LED-lit grind area ensures precise dosing.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI