Page is loading ...
ELECTRIC BURR COFFEE GRINDER
Technical parameters
Model: HB-985
Capacity: 120ml
Battery parameter: 3.7V/1250mAh
Bean hopper: 25g
Power: 13W
Voltage: DC3.7V
Troubleshooting
Charging failure
1. Check whether the charging line is correctly
connected;
2. Whether the motor is damaged.
The motor doesn't work
1. Whether the motor is energized;
2. Whether the foreign matter is in the coffee bean
hopper; 3. Whether the installation is correct.
The motor works for a short time
1. Charge it due to insufficient electric quantity;
Warranty card
Attentions:
1. The warranty period of the motor is one year as
of the purchase date. The remaining accessories
aren't within the warranty scope;
User name: ________________
2. To ensure the service, fill in the form and send it
to the nearby after-sales service point;
Tel.: ________________
3. Provide the proof of purchase when repair.
Purchase date: ________________
The following circumstances are beyond the warranty scope:
1. Any natural wear and tear, and product damage
arising from overload work;
Product model: ________________
2. Artificial damage resulting from improper use;
Purchase channel: ______________
3. Any product modified, dismantled or repaired
without permission;
Order No. ________________
4. Artificial damage.
Contact address: _______________
Product Operation Instruction:
Press the button to start
grinding. The indicator light
is blue when working.
The grinder will
automatically stop working
after all the coffee beans are
ground, and grinding can
be stopped by pressing the
button anew.
The USB-C charging port is
on the top of grinder.
The indicator light will trun
red when the grinder is
charging. The blue light will
be on after being fully
charged.
The grinder can be charged
via plug
You can use your computer
to charge it
Adding coffee bean:
Clockwise rotate the top
host to open the coffee
bean hopper.
Put the coffee beans into
the middle bean hopper. To
ensure the grinding process
work well, we suggest to fill
80% full.
Anticlockwise rotate the top
host to lock the coffee bean
hopper tight.
Adjust the grinding thickness:
The adjustment knob is at the bottom of
the grinder. Clockwise rotate such nut to
make the particle formed after grinding
thinner; Anticlockwise rotate such nut to
make the particle formed after grinding
thicker.
Note:
⚫ Please wipe up the grinder exterior with wet towel. Don't put the top core to the water.
⚫ When the product works continuously, it needs to be started after 30 minutes
intermittently after finishing a grinding cycle
⚫ Please Keep and use the product in a dry place.
/