Blaupunkt SAN FRANCISCO RDM 169 User manual

Brand: Blaupunkt

Model: SAN FRANCISCO RDM 169

Category: Car media receivers

Type: User manual

This manual is also suitable for

RDM 169

Radio / CD

Operating instructions

San Francisco RDM 169

S.FrancisRDM169 d 95%® 29.05.2002, 11:04 Uhr1

Erklärung der Positions-Nummern siehe Kurzanleitung / Refer to the Quick Reference for the explanation of these operating

elements / Explication des numéros de référence cf. notice d’emploi / Vedere le Istruzioni in breve per una spiegazione dei

numeri di posizione / Verklaring van de positienummers: zie beknopte handleiding / Se “Kort handledning” för förklaringar till

positionsnumren / Para la explicación de los números de posición, véanse las instrucciones breves / Os números de posição

encontram-se na breve instrução

131415

S.FrancisRDM169 d 95%® 29.05.2002, 11:04 Uhr2

Contents

Quick Reference........................... 50

RC 08 remote control unit ........... 58

Important notes ............................ 59

What you need to know ........................ 59

Traffic safety ......................................... 59

Installation............................................. 59

Telephone mute.................................... 59

Accessories .......................................... 59

Guarantee............................................. 59

International telephone information...... 59

KeyCard theft protection

system........................................... 60

Operating the unit for the first time....... 60

Incorrect KeyCard ............................. 60

Removing the KeyCard ........................ 60

“Training” a second KeyCard /

Replacing a KeyCard............................ 60

Incorrect KeyCard ............................. 61

Displaying the radio pass data ............. 61

Short Additional Memory (S.A.M.)........ 61

Turn On Message (T.O.M.) .................. 61

Flashing light as theft protection .......... 61

Care of your KeyCard........................... 61

Lost or damaged KeyCard ................... 61

Training the new KeyCard.................... 62

First-time installation................... 62

Activating the Install menu ................... 62

Closing the Install menu ....................... 62

Setting the clock ................................... 62

Entering your Owner Identification ....... 62

Reset to default settings....................... 63

Switching the ignition connection

on/off ..................................................... 63

Switching the internal output stage

on/off ..................................................... 63

Connecting external equipment ........... 63

Closing the Install menu ....................... 63

Selecting the operating mode.....64

Optimising the viewing angle ..... 64

Radio operation with RDS ........... 65

Switching between the menu levels ..... 65

AF - Alternative frequency.................... 65

REG - regional program ....................... 66

Selecting a waveband .......................... 66

Station tuning........................................ 66

Automatic tuning

/ ....................... 66

Manual tuning with << / >>................ 67

Scrolling through the broadcasting

networks (FM only) ............................... 67

Changing the memory bank (FM)......... 67

Storing stations..................................... 67

Automatically storing the strongest

stations with Travelstore....................... 68

Recalling stored stations ...................... 68

Scanning stored stations with

Preset Scan .......................................... 68

Scanning stations with Radio Scan...... 68

Changing the scan time (Scan)............ 69

Selecting the seek tuning sensitivity .... 69

Switching from stereo to mono (FM) .... 69

Automatic bandwidth adjustment

(SHARX) ............................................... 69

PTY - Program Type............................. 69

Switching PTY on/off......................... 69

Program type ........................................ 70

Checking the program type of the

station................................................ 70

Selecting and storing PTY program

types .................................................. 70

PTY seek tuning................................ 71

Radio text.............................................. 71

Traffic information station

reception with RDS-EON ............. 72

Traffic announcement priority on/off .... 72

Warning beep ....................................... 72

Switching the warning beep off......... 72

Automatic seek tuning start

(CD and CD changer operation) .......... 73

Adjusting the volume for traffic

announcements and the warning beep .. 73

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr48

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

CD operation /

CD changer operation.................. 73

Inserting a CD....................................... 73

Removing a CD .................................... 73

Switching on CD operation................... 73

Switching on CD changer

operation............................................... 74

Selecting the display mode .................. 74

Selecting CDs ....................................... 74

Selecting tracks .................................... 74

Repeating tracks/CDs........................... 75

TPM (Track-Program-Memory) ............ 75

Switching TPM playback on/off......... 75

Storing tracks with TPM .................... 75

Deleting the TPM .............................. 75

MIX........................................................ 76

SCAN .................................................... 76

Entering CD names .............................. 76

Deleting CD names/TPM at the same

time ....................................................... 76

Clock - Time.................................. 77

Displaying the clock.............................. 77

Setting the clock ................................... 77

Selecting a 12 or 24-hour mode........... 78

Synchronisation .................................... 78

Contents

DSA – Digital Sound Adjustment . 78

An overview of the equalizer functions 78

Activating the equalizer settings........... 78

Switching the equalizer on/off .............. 79

Self-adjusting equalizer ........................ 79

Hi-fi self-adjustment.............................. 79

Starting the hi-fi self-adjustment ....... 79

Manual equalizer adjustment ............... 80

Activating an equalizer setting ............. 80

DNC – Dynamic Noise Covering .. 81

Adjusting DNC ...................................... 81

Adjusting DNC sensitivity ..................... 81

Switching DNC on/off ........................... 81

Safety information................................. 81

DSC programming ....................... 82

TUN (Tuner).......................................... 82

DISP (Display) ...................................... 83

VAR (Various)....................................... 83

KC (KeyCard) ....................................... 84

CLK (Clock) .......................................... 85

CDC (Changer)..................................... 86

Overview of the DSC default

settings.................................................. 86

Specifications............................... 87

Glossary -

Technical Terminology................ 87

Index.............................................. 89

Installation instructions ............ 351

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr49

Switching the sound on/off:

Press ON briefly. If the sound has

been switched off, “Mute” will appear

in the display.

You can switch on the sound again by

turning the volume knob 3.

Switching the unit on/off with the

KeyCard:

The unit can also be switched on/off by

inserting or removing the KeyCard.

Also refer to No. B in the Quick Ref-

erence for the section on the KeyCard

theft protection system.

Switching the unit on/off with the ig-

nition:

The unit can be switched on/off with

the vehicle ignition if the unit has been

installed accordingly.

After you switch off the ignition, you

will hear a beep to remind you to re-

move the KeyCard before you leave

the vehicle.

Switching the unit on when the igni-

tion is off

If the ignition is switched off (but the

KeyCard in place), it is possible to op-

erate the unit as follows:

2 ON

Switching the unit on:

With the KeyCard inserted, press ON

briefly.

The unit will begin to operate in the

mode last selected at the power-on

volume.

When the unit is switched on for the

first time, “INSTALL” will appear in the

top line of the display. Now it is possi-

ble to alter important basic settings,

such as the clock, proof of ownership,

reset to the default settings, etc.

If necessary, refer to the section on

“First-time installation”.

Press EXIT to quit this menu.

Switching the unit off:

Press ON for approx. 1 sec.

The angle of the display can be adjust-

ed to optimise its legibility. If neces-

sary, refer to the section on “Optimis-

ing the viewing angle”.

Quick Reference

1 Unlocking the fold-down operating

panel

After the operating panel has been un-

locked it is possible to insert or remove

the KeyCard or a CD.

Press 1 to unlock the panel, it will

fold down forwards. The operating

panel cannot be removed and must not

be used as a storage shelf. To close

and lock the operating panel, push it

back to its original position (arrow 3).

For safety’s sake, the operating

panel must always remain

closed while the vehicle is mov-

ing.

When you leave the vehicle,

open the operating panel and re-

move the KeyCard as added theft

protection.

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr50

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

After the beep press ON. The unit will

switch on.

After the unit has played for an hour, it

will switch off automatically to prevent

the vehicle battery from running down.

3 Adjusting the volume

Turn the knob to adjust the volume.

The volume setting will appear in the

top line of the display. When the unit is

switched on, it will play at a pre-de-

fined volume (VOL).

VOL can be adjusted as well (refer to

“DSC programming - VAR, VOL”).

4 Softkeys / Display

Softkey = a key with changing func-

tions

You can select the functions which ap-

pear in the display.

Radio operation

Switching between the menu levels

During radio operation, you can press

TU to switch between menu level 1

and menu level 2.

Menu level 1 contains four pages

(FM1, FM2, FM3, FMT) which can be

used to store radio stations. Press

NEXT to switch to the next page.

Menu level 2 has two pages containing

functions related to radio operation.

Page 1 includes FM, TS, TA, AM, PS,

SCAN.

Page 2 includes AF, LOC, PTY, REG,

RT, MONO. Press PRE or NEXT to

switch between the pages.

The unit will switch back to menu level

1 automatically 8 sec. after the last key

has been pressed.

Menu level 1

Station keys and memory banks

NEXT - FM

Switches between FM1, FM2, FM3,

FMT

NEXT - AM (MW, LW)

Switches between the MW and LW

wavebands

Keys 1 - 6

To store and recall radio stations on

the FM waveband: FM1, FM2, FM3,

FMT.

It is possible to store and recall 6 sta-

tions each on the MW and LW wave-

bands.

To store stations: Press the key for ap-

prox. 1 sec.

To recall stations: Press the key brief-

ly.

Quick Reference

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr51

“TA” will appear when the priority for

traffic information has been activated.

Switching priority on/off: Press TA.

To interrupt a traffic message: Press

STOP. Stop will only appear in the dis-

play during traffic message broad-

casts.

ENT (Enter)

Press this key to accept/store the set-

tings made.

EXIT

Press this key to end/cancel any set-

tings made.

Switches to AM (MW or LW).

Press NEXT to select the other AM

waveband.

PS (Preset-Scan)

The radio stations stored on the preset

keys in reception range will be

scanned one after the other.

To stop the Preset Scan function:

Press EXIT.

Menu level 2

Adjusting the radio functions

NEXT - FM

Switches to additional radio functions:

AF, LOC, PTY, REG, RT, MONO

PRE

Switches to the previous radio func-

tions:

FM, TS, TA, AM, PS, SCAN.

Switches to FM.

TS (Travelstore)

Automatically stores the six stations

with the strongest reception in the

“FMT” memory bank.

TA (Traffic Announcement = Priority

for traffic information)

“TP” will appear in the display when

the radio is tuned into a station which

broadcasts traffic information.

SCAN

All of the radio stations within recep-

tion range on the selected waveband

will be scanned.

To stop the Scan function:

Press EXIT.

Switch to

AF, LOC, PTY, REG, RT, MONO:

Press NEXT.

If you want to activate these functions

from menu level 1, first press TU and

then NEXT.

Quick Reference

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr52

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

MIX

CD tracks are played in random order.

Press MIX to select the following func-

tions:

- MIX CD = The tracks on the CD se-

lected are played in random order.

For changer operation, the CDs are

selected in numerical order, the

tracks then played back in random

order.

- MIX MAG (for changer operation

only) = All of the tracks on the CDs

in the magazine are played back in

random order.

- MIX OFF = switches the function off.

SCAN

Scans the CD tracks (for changer op-

eration the tracks on all of the CDs).

Start SCAN:

Press SCAN. The tracks will be

scanned in ascending order. The scan

time for CD operation can be altered

(refer to “DSC programming - SCAN”).

Press SCAN. The track last scanned

will begin to play.

(Alternative Frequency for RDS opera-

tion)

Switching AF on/off: Press AF briefly.

LOC - Local

Press LOC to switch the seek tuning

sensitivity between “Local” and “Dis-

tance”.

PTY

(Program Type)

PTY changes the station keys into pro-

gram keys.

Switching PTY on/off: Press PTY brief-

ly. PTY will light up under top line in

the display.

REG (Regional)

Gives priority to regional programs.

Switching REG on/off: Press REG

briefly.

RT - Radio text

Transmits the text broadcast by the ra-

dio station selected.

Radio text cannot be activated unless

the ignition is off or you have switched

to “IGN off” in the Install menu.

MONO

Switches between stereo/mono

When the unit is switched on, it auto-

matically switches to stereo.

CD and CD changer operation (CDC)

Press CD:

During CD and CD changer operation,

use the corresponding softkeys to se-

lect MIX, SCAN, RPT (repeat), TPM

and NAME.

Press CDC:

During CD changer operation, menu

level 1 indicates which magazine slots

contain CDs, use NEXT to page

through.

Press CDC to switch the menu level.

Now you can activate the functions

from “MIX” to “NAME”.

Quick Reference

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr53

5 Top line

Indicates a function of the operating

mode selected, e.g. the radio station

selected during radio operation.

You can use DIS to select what is dis-

played in the top line.

Radio operation

EUROPE 1 - radio station name

102,40 - frequency

Pop M(usic) - PTY code

10:53 - clock

CD and CD changer operation

TRACK 1 - CD track number (CD

mode)

VIVALDI - CD name

CD 2 T 2 - CD number and track

number (changer opera-

tion)

10:53 - clock

6 DSA (Digital Sound Adjustment)

DNC (Dynamic Noise Covering)

Adjusts the volume to the driving

noise. Refer to the section on “DSA” or

“DNC”.

7 Rocker switch

Radio operation

If you press the rocker switch while

you are on menu level 2, the unit will

automatically switch back to menu

level 1.

/ Radio station seek tuning

Down

<< / >> Up/down in increments

(for FM only, when AF and

PTY are switched off)

For FM only:

<< / >> Pages through the station net-

work when AF and PTY are

switched off, e.g.: NDR 1, 2, 3,

4, N-JOY ... .

RPT - Repeat

CD tracks, and for CD changer opera-

tion entire CDs, can be played repeat-

edly.

Press RPT to select from the following

functions:

- REP TRCK = repeats track

- REP CD = repeats CD (for CD

changer operation only)

- RPT off = switches the function off.

TPM - Track Program Memory

Stores and plays back your favourite

tracks for CD or CD changer operation.

It is possible to archive up to 30 CDs

for CD operation and 99 CDs for CD

changer operation with a maximum of

40 tracks each (refer to the section on

“TPM programming”).

CLR

Deletes the TPM (refer to the section

on “Deleting the TPM”).

NAME

In CD mode, you can enter names with

a maximum of 8 characters for up to

30 CDs.

In CD changer mode, you can enter

names with a maximum of 7 charac-

ters for up to 99 CDs.

Quick Reference

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr54

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

CD and CD changer operation

<< / >> Selects CDs (for CD changer

operation only)

>> Up: Press briefly

<< Down: Press briefly

/ Selects tracks

Up: Press briefly

CUE - fast forward (audible):

Hold pressed down

Down: Press briefly twice or

repeatedly in succession

Restart a track: Press briefly

Review - fast reverse (audi-

ble): Hold pressed down

8 DSC (Direct

Software Control)

Use DSC to adjust those basic settings

which can be programmed. For more

information refer to “DSC program-

ming”.

9 AUD

Adjusts Treble, Bass, Fader (front/

rear), Balance (left/right), Loudness

(boosts lower frequency ranges at low

volume to create a more natural

sound) and SUB (-out) to adjust the

amplifier level for the SUB-woofer.

: DIS

Select from a number of displays

Radio operation

Press DIS repeatedly to select:

- the name of the station selected

- the current frequency

- PTY code

- clock

This will not operate properly unless

the radio is tuned into an RDS station

with adequate signal strength.

Press DIS for approx. 4 sec.:

to synchronise the clock (internal clock

with the DCF-77 atomic clock).

CD operationb

Press DIS to select:

- Track number, clock

- CD name (if entered), track number

- Clock, track number

CD changer operation

Press DIS to select:

- CD number, track number, clock

- CD name (if entered)

- Clock, track number

Quick Reference

Making adjustments:

Select the operating mode.

Press AUD once and select the func-

tion you wish to adjust with the corre-

sponding key. “Bass” and the current

setting, for example, will appear in the

top line of the display.

Use << / >> to alter the setting.

The last setting selected will be stored

automatically.

SUB-Out

If a SUB-woofers is connected to the

system, it is possible to adjust the out-

put level with “SUB” and

/ .

To quit the AUD menu:

Press AUD or EXIT.

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr55

Special pictures for a given situation,

e.g. driving cars during traffic an-

nouncements

CD and CD changer operation

00:20 - Time (elapsed playing

time)

TRACK 3 - CD track number

= CDC

Switches to changer operation (only if

a changer is connected),

selects the menu levels.

Quick Reference

If you have not installed a CD changer,

the unit will switch to AUX if “AUX on”

has been selected in the INSTALL

menu.

> CD

Switches to CD operation

? TU (tuner)

Switches to radio operation, selects

the menu levels

@ CD slot

After you insert the CD with the label

facing up, it will be automatically trans-

ported to the playing position. The sys-

tem will automatically switch to CD

playback.

; Display

Radio operation

TP, TA - TP = Traffic Program (ra-

dio is tuned into a traffic

program station)

- TA = priority for traffic pro-

gram stations is active

PTY - Program type is active

AF - Alternative frequency for

RDS

DISC-IN - CD is in the CD drive

< DOT field

Additional display for top line.

Radio operation

FM1, 2, 3,T - FM memory banks

MW, LW - Wavebands

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr56

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

To remove KeyCard perform these

steps in the reverse order.

Make sure to read the information in

the section on the “KeyCard theft pro-

tection system”.

C Eject

Press the Eject button briefly, the CD

will eject.

A Visual theft protection

If you want to use the flashing LED to

deter thieves, make sure that

the car radio is installed correctly and

switched off;

the operating panel is opened;

the KeyCard has been removed;

LED is switched to on in the DSC

menu (default setting).

For more information, refer to the sec-

tion on “DSC programming, KeyCard,

LED on/off”.

B KeyCard theft protection system

To operate this unit, the KeyCard must

be inserted.

KeyCard

Inserting the KeyCard

Press 1 to unlock the operating pan-

el, the operating panel will fold down

forward.

Slide the KeyCard in with the con-

tacts facing down (see illustration).

Lock operating panel back in place.

For safety’s sake, the operating

panel must remain locked when

the vehicle is in motion. When

you leave the vehicle, unlock the

panel and remove the KeyCard

to protect the equipment against

theft.

Quick Reference

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr57

RC 08 remote control unit

D V- / V+

Volume control.

E SRC (Source)

Switches operating modes

Press SCR repeatedly to select.

- Radio

- CD

- Changer (if a changer is connected)

Sound mute on/off:

Press

briefly. When the sound has

been switched off “Mute” will appear in

the display.

F <</>>, /

Radio operation

Station seek tuning

down

<</>> down/up in short intervals (for

FM only when AF is switched

off)

For FM only:

<</>> Pages through the station net-

work with AF on e.g.: NDR 1,

2, 3, 4, N-JOY, ... .

CD and CD changer operation

<</>> Select CD (for changer opera-

tion only)

>> up: Press briefly

<< down: Press briefly

/ Select track

up: Press briefly

CUE - fast forward (audible):

Hold pressed down

down: Press twice or repeat-

edly briefly

To restart the track: Press

briefly

REVIEW - fast reverse (audi-

ble): Hold pressed down

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr58

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

Guarantee

The scope of the guarantee is determined

by the laws in the country where the unit

was purchased.

Regardless of the legal guarantee regula-

tions, Blaupunkt affords a 12-month guar-

antee. Your cash register receipt is a valid

guarantee coupon.

If you have any questions about the guar-

antee, please contact your dealer. He will

be happy to assist you, repair your equip-

ment or forward it to an authorised Blaupunkt

repair shop. In addition, our employees are

there to help you on our service hotline.

You will find the telephone and fax numbers

on the last page of this manual.

International telephone informa-

tion

Have you got any questions on the opera-

tion of this equipment or do you require more

information?

Give us a call!

You will find the international telephone and

fax numbers on the last page of this manu-

al.

structions on installation and connection at

the end of this manual carefully.

Telephone mute

If you have installed a car telephone in your

vehicle, it is possible to automatically mute

the radio or CD playback when you use the

telephone (telephone mute).

“Phone” will then appear in the display.

Traffic announcements continue to have

priority if you have activated TA. You can

activate TIM when the system is switched

to telephone mute.

Accessories

Use only Blaupunkt-approved accessories

and spare parts.

You can use the following Blaupunkt prod-

ucts with this unit:

CD changers

The following CD changers can be connect-

ed directly: CDC A 06, A 071, A 072, A 08.

The A 05 can be connected with the adapt-

er cable 7 607 889 093.

Amplifiers

All Blaupunkt amplifiers.

Important notes

What you need to know

Before using your new car audio system,

please read through the following informa-

tion carefully.

Traffic safety

As the driver of a motor vehicle, it is your

responsibility to pay attention to the traffic

situation at all times. Never use your car

audio system in a way that could distract

you.

Please keep in mind that you travel a dis-

tance of 14 m per second at a speed of only

50 km/h.

Should the traffic situation become particu-

larly demanding, we advise you not to use

the audio system.

Always make sure that you are still able to

hear any warning signals coming from out-

side the vehicle, such as police or fire en-

gine sirens, so that you can react accord-

ingly.

Consequently, you should always select a

moderate volume for playing your car audio

system while you are driving.

Installation

If you would like to install your new car ster-

eo yourself or add other audio components

to existing ones, then please read the in-

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr59

KeyCard theft protection system

• Insert the KeyCard with the contacts

facing down as shown in the illustra-

tion (arrow 1).

• Push the card in the direction of the ar-

row (2) and lock the operating panel

back into position (arrow 3).

• Turn on the set with ON.

The car radio is now ready for operation.

Incorrect KeyCard

If a wrong KeyCard is inserted, then “Wrong

KC” will appear in the display.

Remove the wrong card and insert the cor-

rect KeyCard.

Removing the KeyCard

To unlock the operating panel:

• Press 1, the operating panel will fold

down forwards.

• Push the card to the right as far as

possible and remove it to the front.

• Push the operating panel back into po-

sition.

For safety’s sake, the operating

panel must remain locked when

the vehicle is in motion. When

you leave the vehicle, unlock the

panel and remove the KeyCard

to protect the equipment against

theft.

“Training” a second KeyCard /

Replacing a KeyCard

When the unit is in operation with the first

KeyCard, you can “train” a second one to

be also used with the set.

If you want to “train” a second KeyCard:

• Insert the first KeyCard and turn on the

set.

• Press DSC, KC (KeyCard) and LRN

(learn) one after the other.

• Remove the first KeyCard and insert

the new one.

The display will read “Learn OK”.

To exit the menu

• press DSC.

Now you can also use the new KeyCard for

operating your unit.

This car radio comes equipped with one

KeyCard, but it can also be operated with a

second card.

If you have lost your KeyCard or if it was

damaged, you can buy a replacement Key-

Card from your specialised dealer.

If you use two KeyCards, the settings stored

on the first card will be transferred to the

second. However, you can individually store

the following functions:

Preset button assignments, bass, treble,

balance and fader settings, Loudness, TA

(traffic announcement volume), beep vol-

ume, LOW and HIGH (equalizer settings).

In addition, the settings activated before the

radio is switched off, such as the waveband,

station, TA priority, AF, REG on/off, SCAN

(time), seek tuning sensitivity, VOL (Power-

On volume) and SHARX will also remained

stored.

This ensures that you will find your basic

settings re-adjusted automatically as soon

as you have inserted your KeyCard.

Operating the unit for the first

time

To insert the KeyCard, unlock the operating

panel by

• pressing 1, the operating panel will

fold down.

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr60

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

pair service or the emergency call number

of your automobile association.

The freely selectable text with a maximum

of 162 characters can be programmed by

any dealer who has the required equipment

available.

Turn On Message (T.O.M.)

The second KeyCard available from your

specialised dealer also allows you to dis-

play a special turn-on message each time

the radio is switched on.

The freely selectable text with a maximum

of 48 characters can be programmed by any

dealer who has the required equipment

available.

Each time you turn on your system with the

second KeyCard, the programmed text will

appear in the display. Important: “TOM on”

must be selected in the DSC menu.

To find out how to do this, refer to the sec-

tion on “DSC programming - KC (KeyCard),

TOM”.

Flashing light as theft protection

Flashing light diode A

When the vehicle is stationary and the Key-

Card has been removed, the light diode can

be switched to flash as an extra anti-theft

device.

KeyCard theft protection system

A maximum of two cards can be used with

the set.

If you attempt “train” a third one, the access

authorisation for the KeyCard not used for

the “training” process will be deleted auto-

matically.

Incorrect KeyCard

If a wrong KeyCard is inserted, then “Wrong

KC” will appear in the display.

Remove the wrong card and insert the cor-

rect KeyCard.

Displaying the radio pass data

You can use the KeyCard supplied with your

set to display the radio pass data such as

the model name, product number (7 6..) and

serial number.

Please refer to the section on “DSC pro-

gramming - KC (KeyCard), READ”.

Short Additional Memory

(S.A.M.)

The second KeyCard available from your

specialised dealer allows you to read out

short information under the DSC menu item

“KC, READ”. This information will run

through the display and could include, for

example, the phone number of your car re-

For this to function properly, it is necessary

that the positive power supply line and the

permanent +12 V lead are connected such

as described in the installation instructions.

Make sure that the unit is switched off; the

operating panel is unlocked; the KeyCard

has been removed; “LED ON” has been se-

lected in the DSC mode (default setting).

If necessary, please refer to the section on

“DSC programming - KC (KeyCard) LED”.

Switching off the flashing light

The flashing light can be switched off by

selecting “LED OFF” in the DSC menu.

Care of your KeyCard

To ensure that the KeyCard will function

properly it is important that the contacts are

free from any foreign particles. Avoid direct

skin contact.

If necessary, clean the KeyCard contacts

using a cotton swab soaked in rubbing al-

cohol.

Lost or damaged KeyCard

If the KeyCard for your unit is lost or dam-

aged you can train a new KeyCard.

You can purchase the new KeyCard from

any authorised dealer. You will also require

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr61

the master code for the unit, which you will

find in the radio pass.

Always keep the radio pass in a safe

place. Do not leave it in your vehicle.

Training the new KeyCard

• Insert the new KeyCard into the unit

and lock the operating panel into posi-

tion.

• Switch the unit off.

• Press TU and ST1 at the same time

and switch the unit on. “0000” will ap-

pear in the display.

• Now use the rocker switch to enter the

four-digit master code from the radio

pass:

/ - Enter digits

(press as often as required)

<< >> - Select the entry position.

• Press ENT after you have entered the

correct master code.

The new KeyCard has been accepted when

the unit will begin to play.

First-time installation

After you switch on the unit for the first time

or when the unit has been disconnected from

the power supply, “INSTALL” will appear in

the top line of the display.

In this menu you can enter/alter the follow-

ing:

Time, owner ID, reset to default settings,

ignition connection on/off, internal output

stage on/off.

Activating the Install menu

You can activate the Install menu at any

time.

• Just hold DSC pressed down for 4 sec.

Closing the Install menu

• Press EXIT.

Setting the clock

The clock is set automatically when the ra-

dio is tuned into an RDS station which has

the CT function (clock time).

If this signal is not available, the audio sys-

tem will attempt to receive the DCF-77 time

signal (atomic clock) to correct the time the

next time it is switched off. The display will

indicate “CLK Sync” while it is synchronis-

ing the time.

If you would like to set the clock manually,

• press CLK, the field to be adjusted will

flash in the top line of the display

(hours or minutes)

• Press << / >> to switch fields if neces-

sary and use

/ to enter the correct

time.

Once you have completed the setting,

• press ENT, the INSTALL menu will re-

turn to the display.

For more information on the clock, please

refer to the section on the “Clock - Time”.

Entering your Owner Identifica-

tion

Use this function to enter six lines with eight

characters each as your proof of ownership.

To do so

• press O-ID, the first entry position will

flash in the top line of the display.

Use

/ to select the letters, digits and sym-

bols, use << / >> to select the entry posi-

tion.

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr62

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

Switching the internal output

stage on/off

Use AMP (amplifier) to switch the internal

output stage on or off. If an additional am-

plifier has been connected and only the

preamp outputs are being used, it is a good

idea to switch the internal amplifier off.

Switching on/off:

• Press AMP, “Amp on” or “Amp off” will

appear in the top line of the display.

• Use << / >> to switch this setting to on

or off.

• Press ENT to store the new setting

and return to the INSTALL menu.

Connecting external equipment

If external equipment is connected, you have

to switch AUX to on. The default setting for

AUX is off.

AUX will not appear as a menu item if a Blau-

punkt CD changer has been connected.

Closing the Install menu

• Press EXIT.

Reset to default settings

“NORM (set)” will reset any settings you

have altered!

Exception: The stations stored on the sta-

tion presets will remain stored.

If you would like to reset to the default set-

tings,

• press NORM and then press ENT for

approx. 2 sec.

Switching the ignition connec-

tion on/off

Use IGN (ignition) to be able to switch the

car radio on and off with the ON button only

or with the ignition as well.

Switching on/off:

• Press IGN, “Ign on” or “Ign off” will ap-

pear in the top line of the display.

• Use << / >> to switch on to off or off to

on.

• Press ENT to store this setting and re-

turn to the INSTALL menu.

Enter the data you want to use to identify

the unit.

Example:

Line Information

1 MONIKA

2 MÜLLER

3 LANDS 18

4 HILDES-

5 HEIM

6 HI-XX000

Once you have completed your entry for the

first line,

• press NEXT, the display will switch au-

tomatically to the next line.

The DOT display indicates the number of

the line selected (1 - 6).

If you would like to alter the entry in a spe-

cific line,

• press NEXT as often as required.

To complete your entry,

• press ENT.

If the unit is switched on without the Key-

Card, this owner ID information will appear

in the top line of the display for approximately

8 sec.

First-time installation

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr63

Optimising the viewing

angle

The viewing angle of the display can be al-

tered to allow optimum legibility.

• Press DSC, DISP, ANGL one after the

other.

• Press / on the rocker switch to set

the best viewing angle for your posi-

tion.

When you have completed the setting

• press ENT and EXIT twice.

Selecting the operating

mode

You can select from among the following

operating modes: radio (TU), CD and CDC

(changer).

CD cannot be selected unless a CD is in-

serted in the drive.

CDC cannot be selected unless one of the

Blaupunkt changers, the A 06, the A 072,

the A 08, the A 05, or the A 071 has been

connected and there is at least one CD in

the magazine.

To switch the operating mode:

• press TU, CD or CDC.

If you press TU again, the unit will switch to

menu level 2. On this level there are two

pages which you can use to adjust the func-

tions for radio operation. The unit will switch

back to menu level 1 automatically approx.

eight seconds after the last adjustment was

made.

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr64

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

SVENSKA

ESPAÑOL

PORTUGUÊS

To return to page 1:

• press PRE.

The unit will switch back to menu level 1

automatically 8 sec. after the last key was

pressed. Press EXIT to return to menu lev-

el 1 immediately.

AF - Alternative frequency

The AF (Alternative Frequency) function

makes sure that radio is always tuned into

the strongest frequency for the radio station

currently selected.

Activating AF in the display:

For radio operation

• Press TU, menu level 2 will appear, in-

dicating the radio functions.

• Press NEXT to move to page 2 (AF,

LOC, PTY, REG, RT, MONO).

Switching AF on/off:

• Press AF briefly, the red arrow will

light up when AF is switched on. In ad-

dition, “AF” will appear under the top

line of the display.

Radio operation with RDS (Radio Data System)

To move to the next page:

• press NEXT.

The page selected will appear in the DOT

display (FM1, FM2, FM3, FMT).

Menu level 2 has two pages for adjusting

radio functions.

To activate menu level 2:

• Press TU.

The following functions are available: FM,

TS, TA, AM, PS, SCAN.

To move to page 2:

• press NEXT.

The following functions are available: AF,

LOC, PTY, REG, RT, MONO

The Radio Data System offers you more

convenience when you listen to FM radio

stations.

More and more radio stations have begun

to broadcast RDS information alongside

their programs.

As soon as a program has been identified,

the station name including a regional identi-

fier, if available, will appear in the display,

for example, NDR1 NDS (regional program

in Lower Saxony, Germany).

When RDS is activated, the preset buttons

become program buttons. You now know

exactly which program you have tuned into,

making it easy to find the desired station

quickly.

Switching between the menu

levels

During radio operation, you can use TU to

switch between menu level 1 and menu lev-

el 2.

Menu level 1 contains four pages (FM1,

FM2, FM3, FMT), on which it is possible to

store up to six radio stations each.

S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr65

Page is loading ...

Blaupunkt SAN FRANCISCO RDM 169 User manual

Brand: Blaupunkt

Model: SAN FRANCISCO RDM 169

Category: Car media receivers

Type: User manual

This manual is also suitable for

RDM 169

Download PDF

report

Blaupunkt SAN FRANCISCO RDM 169 User manual

This manual is also suitable for

Blaupunkt SAN FRANCISCO RDM 169 User manual

Related papers

Other documents