Sanyo SEC-HR4U4BPN Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Sanyo SEC-HR4U4BPN Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Size : AAA Consumer Type
800mAh
750mAh
1.2V
Fast Charge
2) 800 mA x about 1.1h
Charge
Condition
Fast Charge
2) 0°C - 40°C
0°C - 50°C
Less than
90days
-20°C - 40°C
Less than
1year
-20°C - 30°C
Approx. 13 g
10.5(D) x 44.5(H) mm
T
y
pical Characteristics
Charge Discharge
2009/10
Dimensions
(with tube)
44.5 mm
Specifications
10.5 mm
Typical
Minimum
Type : Nickel-Metal Hydride Battery
Weight
4)
Storage
Condition
Ambient Temp.
Capacity
1)
Internal Impedance 3)
(after discharge to E.V.=1.0V)
1)Single cell capacity under the following condition.
Charge : 80mA×16h, Discharge : 160mA(E.V.=1.0V) at 20°C
Nominal Voltage
Discharge Condition
Size
4) :(Diameter) x (Height)
Cell T
y
pe HR-4UTGA
Charging Current x Time
D
H
10.5 mm
44.5 mm
2)Use recommended charging system.
3)After a few charge and discharge cycles under the above 1) condition.
4)With tube.
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
0 100 200 300 400 500 600 700 800 900
Discharge Capacity (mAh)
Cell Voltage (V)
Charge : 800mA (-V=10mV)
Rest : 1h
Discharge : 160mA,800mA,1600mA (E.V.=1.0V)
Ambient Temp. : 25°C
1600mA
800mA
160mA
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
0 10203040506070
Charge Time (min)
Cell Voltage (V)
Charge : 800mA (-V=10mV)
Ambient Temp. : 0°C,25°C,40°C
0°C
25°C
40°C
A
pprox. 40mΩ(at 1000Hz)
/