Features
•
Round basin
•
With overflow
•
No faucet holes; requires wall- or counter-mount faucet
•
White painted underside
Material
•
KOHLER
®
enameled cast iron.
Installation
•
Vessel, drop-in, or under-mount
CSA B651
OBC
Codes/Standards
ASME A112.19.1/CSA B45.2
ADA
ICC/ANSI A117.1
CSA B651
OBC
Lifetime Limited Warranty for
KOHLER
®
Cast Iron Components
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Sea Salt™FF
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
6-20-2018 04:12
Iron Plains
®
Bathroom Sink
K-20211-W
4" (102 mm)
Recommended ADA Installation
24" (610 mm)
9" (229 mm) Min
8"
(203 mm)
Min
27"
(686 mm)
Min
34"
(864 mm)
11"
(279 mm)
4" (120 mm)
3/8" Cold
3/8" Hot
12" (305 mm)
6"
(152 mm)
7/16"
(11 mm)
6-5/16"
(160 mm)
14"
(356 mm)
2-1/16"
(52 mm)
11-11/16"
(297 mm)
Notes
Technical Information
Install this product according to the installation
instructions.
All product dimensions are nominal.
Drop-In, Under-mount, VesselInstallation:
NOTICE: Countertop manufacturer or cutter must
use the cut-out template provided with the
1-3/4" (44 mm)Drain hole:
1319047-7, required, includedTemplate:
product, or a current one provided by Kohler Co.
(call 1-800-4-KOHLER). Kohler Co. is not
responsible for cutout errors when the incorrect
cut-out template is used.
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
6-20-2018 04:12
Iron Plains
®
Bathroom Sink
K-20211-W
/