K-2833

Kohler K-2833 Operating instructions

  • Hello, I've reviewed the specification document for the KOHLER DemiLav K-2833 bathroom sink. This document details the sink's features, such as its sloped rectangular basin, enameled cast iron construction, and vessel installation. It also specifies that it requires a wall or counter-mounted faucet. I'm ready to answer any questions you have about this product.
  • What type of faucet is required for this sink?
    What material is the sink made of?
    Does this sink have an overflow?
DemiLav®
18-1/4" rectangular vessel bathroom sink, no overflow
K-2833
Features
Sloped rectangular basin
No faucet holes; requires wall- or counter-mount faucet
Material
KOHLER® enameled cast iron
Installation
Vessel
Recommended Products/Accessories
K-7129 Drain
K-9018 P-Trap
K-23726 Drain treatment
K-23725 Cast iron cleaner
Codes/Standards
ASME A112.19.1/CSA B45.2
ADA
ICC/ANSI A117.1
CSA B651
KOHLER® Enameled Cast Iron
Kitchen and Bathroom Sink Lifetime
Limited Warranty
See website for detailed warranty information.
Available Colors/Finishes
Color tiles intended for reference only.
Color Code Description
0 White
FF Sea Salt
96 Biscuit
NY Dune
95 Ice Grey
58 Thunder Grey
7 Black Black
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-2-2023 21:04 - US/CA/MX
DemiLav®
18-1/4" rectangular vessel bathroom sink, no overflow
K-2833
9" (229 mm)
Min
1-7/8"
(48 mm)
27"
(686 mm)
Min
34"
(864 mm)
8" (203 mm)
Min
11"
(279 mm)
Recommended ADA Installation
7-13/16"
(198 mm)
1-1/2" (38 mm)
12-3/8"
(314 mm)
14"
(356 mm)
9-3/4"
(248 mm)
15-5/8"
(397 mm)
16-1/2"
(419 mm)
1-11/16" (43 mm)
7"
(178 mm)
10"
(254 mm)
L Of Fitting 18-1/4" (464 mm)
4" (102 mm)
24"
(610 mm)
ADA Drain Outlet
3/8" Cold3/8" Hot
1-1/4" OD
C
Technical Information
All product dimensions are nominal.
Bowl configuration: Single
Bowl area (Only): Length: 16-1/2" (419 mm)
Width: 13-3/4" (349 mm)
Water depth: 5" (127 mm)
With overflow: No
Drain hole: 1-3/4" (44 mm)
Template: 1046630-7, required, included
Notes
Install this product according to the installation
instructions.
Product does not have overflow.
NOTICE: Countertop manufacturer or cutter
must use the cut-out template provided with the
product, or a current one provided by Kohler
Co. (call 1-800-4KOHLER). Kohler Co. is not
responsible for cutout errors when the incorrect
cut-out template is used.
The spout must be a minimum of 5" (127 mm)
long for adequate clearance into the bathroom
sink when installed with the centerline, as
shown.
ADA, CSA B651 compliant when installed to
the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
10-2-2023 21:04 - US/CA/MX
/