![](//vs1.manuzoid.com/store/data-gzf/1c82abb0e3d60e55c17931f9456f10b5/2/000863742.htmlex.zip/bg2.jpg)
IMPORTANT: READ OPERATOR'S MANUAL THOROUGHLY AND
FOLLOW THE SAFE OPERATION PRACTICES BEFORE OPERATING .
Read and understand all instruction, warning, and danger labels.
Lea el manual de operación anexo sobre ensamblaje e inicio.
Turn engine switch to ON position.
Fill tank with gas to within 1/2 inch of top of tank. Open
fuel valve.
Pull starter rope with quick, full armstroke. If engine
does not start after ten seconds of repeated pulls, wait
a few minutes and repeat.
Need Help?
Call 1-800-800-7310
Pull CHOKE out.
Choke
Push CHOKE in after engine starts.
7
8
9
10
11
IMPORTANT: Lubricate beam, adjust wedge assembly, and check hydraulic
fluid before operating. Refer to Operator’s Manual for instructions.