2. Toro
  3. Aluminum Spindle Blower Adapter Kit, Grandstand or Z Master Mower

Toro Aluminum Spindle Blower Adapter Kit, Grandstand or Z Master Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Aluminum Spindle Blower Adapter Kit, Grandstand or Z Master Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3436-239RevA
AluminumSpindleBlowerAdapterKit
Grandstand
®
orZMaster
®
Mower
ModelNo.140-4961
InstallationInstructions
Installation
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
Description
Qty.
Use
Nopartsrequired
–
Preparethemachine.
Pulleyassembly1
Pulley-platemount1
Flangenut(3/8inch)
3
Installthepulleyassemblyandbelt.
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
PreparingtheMachine
Performthefollowingproceduretopreparethemachineforattachingtheblowerandnishingkit.
1.DisengagethePTO,movethemotion-controlleverstotheNEUTRAL-LOCKposition,andsettheparking
brake.
2.Shutofftheengine,removethekey,andwaitforallmovingpartstostopbeforeleavingtheoperating
position.
3.Repairallbentordamagedareasofmowerdeckandreplaceanymissingparts.
4.Cleanthemachineofanydebrisonthedeckorrearpartofthemachinetoeaseinstallation.
©2019—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.T oro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3436-239*A
InstallingthePulley
AssemblyandBelt
1.Removethetopnut,washer,andsheavefrom
thespindle(Figure1).
Note:Notetheorientationofthesheavewhen
youremoveitfromthespindletoensurethat
youinstallitproperlylaterintheprocess.
g302393
Figure1
1.Topnut
3.Sheave
2.Washer
4.Spindle
2.Insertthepulley-platemountstudsintotheholes
inthesheave(Figure2).
g302390
Figure2
1.Sheave
2.Pulley-platemountstuds
3.Looselyinstallthe3nutstothestuds(Figure3).
Leaveaclearanceof5mm(3/16inch)between
thenutandsheave.
g302412
Figure3
1.Nut
2.Stud
2
4.Installthesheaveassemblytothespindleusing
thewasherandtopnut(Figure4).
g302413
Figure4
1.Topnut
3.Sheaveassembly
2.Washer
4.Spindle
5.Torquethetopnutto176to217N∙m(130to
160ft-lb).
Note:Ensurethatthesheavespinsfreely.
6.Alignthenewpulleyassemblysothatthe
openingstoverthenuts(Figure5).
g302411
Figure5
1.Pulleyassembly2.Nuts
7.Turnthepulleytolockitintoposition(Figure6).
Note:Ifthepulleydoesnotturn,loosenthe
nutsmoretoraisethenutsandallowthepulley
tolockintoposition.
g302414
Figure6
1.Pulleyassembly
8.Afterthenewpulleyassemblyisinposition,
tightenthenutstosecurenewpulleyassembly.
Torquethe3nutsto28to34N∙m(21to25ft-lb).
9.Installthedeckbelt.
3
/