Electrolux ERF3869SOX User manual

Type
User manual

This manual is also suitable for

ERF3869SOW
ERF3869SOX
DA Køleskab Brugsanvisning 2
EN Refrigerator User Manual 23
FR Réfrigérateur Notice d'utilisation 45
CONTENTS
1. SAFETY INFORMATION..................................................................................24
2. SAFETY INSTRUCTIONS................................................................................25
3. OPERATION.....................................................................................................27
4. DAILY USE.......................................................................................................30
5. HINTS AND TIPS............................................................................................. 31
6. CARE AND CLEANING....................................................................................32
7. TROUBLESHOOTING......................................................................................34
8. INSTALLATION................................................................................................ 37
9. NOISES............................................................................................................ 42
10. TECHNICAL INFORMATION......................................................................... 43
WE’RE THINKING OF YOU
Thank you for purchasing an Electrolux appliance. You’ve chosen a product that
brings with it decades of professional experience and innovation. Ingenious and
stylish, it has been designed with you in mind. So whenever you use it, you can
be safe in the knowledge that you’ll get great results every time.
Welcome to Electrolux.
Visit our website for:
Get usage advice, brochures, trouble shooter, service information:
www.electrolux.com/webselfservice
Register your product for better service:
www.registerelectrolux.com
Buy Accessories, Consumables and Original spare parts for your appliance:
www.electrolux.com/shop
CUSTOMER CARE AND SERVICE
Always use original spare parts.
When contacting our Authorised Service Centre, ensure that you have the
following data available: Model, PNC, Serial Number.
The information can be found on the rating plate.
Warning / Caution-Safety information
General information and tips
Environmental information
Subject to change without notice.
ENGLISH
23
1. SAFETY INFORMATION
Before the installation and use of the appliance, carefully
read the supplied instructions. The manufacturer is not
responsible if an incorrect installation and use causes
injuries and damages. Always keep the instructions with
the appliance for future reference.
1.1 Children and vulnerable people safety
This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe
way and understand the hazards involved.
Do not let children play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
Keep all packaging away from children.
1.2 General Safety
This appliance is intended to be used in household
and similar applications such as:
Farm houses; staff kitchen areas in shops, offices
and other working environments
By clients in hotels, motels, bed and breakfast and
other residential type environments
Keep ventilation openings, in the appliance enclosure
or in the built-in structure, clear of obstruction.
Do not use mechanical devices or other means to
accelerate the defrosting process, other than those
recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the food
storage compartments of the appliance, unless they
are of the type recommended by the manufacturer.
www.electrolux.com24
Do not use water spray and steam to clean the
appliance.
Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
If the supply cord is damaged, it must be replaced by
the manufacturer, its Authorised Service Centre or
similarly qualified persons in order to avoid a hazard.
If the appliance is equipped with an Ice maker or a
water dispenser, fill them with potable water only.
If the appliance requires a water connection, connect it
to potable water supply only.
The inlet water pressure (minimum and maximum)
must be between 1 bar (0,1 MPa) and 10 bar (1 MPa)
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
Remove all the packaging.
Do not install or use a damaged
appliance.
Obey the installation instruction
supplied with the appliance.
Always be careful when you move the
appliance because it is heavy. Always
wear safety gloves.
Make sure the air can circulate
around the appliance.
Wait at least 4 hours before
connecting the appliance to the power
supply. This is to allow the oil to flow
back in the compressor.
Do not install the appliance close to
radiators or cookers, oven or hobs.
The rear of the appliance must stand
against the wall.
Do not install the appliance where
there is direct sunlight.
Do not install this appliance in areas
that are too humid or too colds, such
as the construction appendices,
garages or wine cellars.
When you move the appliance, lift it
by the front edge to avoid scratching
the floor.
2.2 Electrical connection
WARNING!
Risk of fire and electrical
shock.
The appliance must be earthed.
Make sure that the electrical
information on the rating plate agrees
with the power supply. If not, contact
an electrician.
Always use a correctly installed
shockproof socket.
Do not use multi-plug adapters and
extension cables.
Make sure not to cause damage to
the electrical components (e.g. mains
plug, mains cable, compressor).
Contact the Authorised Service
Centre or an electrician to change the
electrical components.
ENGLISH 25
The mains cable must stay below the
level of the mains plug.
Connect the mains plug to the mains
socket only at the end of the
installation. Make sure that there is
access to the mains plug after the
installation.
Do not pull the mains cable to
disconnect the appliance. Always pull
the mains plug.
2.3 Use
WARNING!
Risk of injury, burns,
electrical shock or fire.
Do not change the specification of this
appliance.
Do not put electrical appliances (e.g.
ice cream makers) in the appliance
unless they are stated applicable by
the manufacturer.
Be careful not to cause damage to the
refrigerant circuit. It contains
isobutane (R600a), a natural gas with
a high level of environmental
compatibility. This gas is flammable.
If damage occurs to the refrigerant
circuit, make sure that there are no
flames and sources of ignition in the
room. Ventilate the room.
Do not let hot items to touch the
plastic parts of the appliance.
Do not store flammable gas and liquid
in the appliance.
Do not put flammable products or
items that are wet with flammable
products in, near or on the appliance.
Do not touch the compressor or the
condenser. They are hot.
2.4 Care and cleaning
WARNING!
Risk of injury or damage to
the appliance.
Before maintenance, deactivate the
appliance and disconnect the mains
plug from the mains socket.
This appliance contains hydrocarbons
in the cooling unit. Only a qualified
person must do the maintenance and
the recharging of the unit.
Regularly examine the drain of the
appliance and if necessary, clean it. If
the drain is blocked, defrosted water
collects in the bottom of the
appliance.
2.5 Disposal
WARNING!
Risk of injury or suffocation.
Disconnect the appliance from the
mains supply.
Cut off the mains cable and discard it.
Remove the door to prevent children
and pets to be closed inside of the
appliance.
The refrigerant circuit and the
insulation materials of this appliance
are ozone-friendly.
The insulation foam contains
flammable gas. Contact your
municipal authority for information on
how to discard the appliance
correctly.
Do not cause damage to the part of
the cooling unit that is near the heat
exchanger.
www.electrolux.com26
3. OPERATION
3.1 Control panel
1 2
3
4
5
6
10
11
9
7
8
1
Temperature button
2
Display
3
ON/OFF
4
Shopping button
5
Light/Filter reset button
6
High sparkling water
7
Low sparkling water
8
Dispenser lever
9
Still cold water
10
ChildLock button
11
Mode
It is possible to change predefined sound
of buttons to a loudly one by pressing
together Mode and temperature button
for some seconds. Change is reversible.
3.2 Display
A B
C
D
E
FG
H
I
J
A) ExtraHumidity mode
B) Temperature indicator
C) Water choice indicator
D) Water circuit cleaning
E) Alarm indicator
F) Water filter indicator
G) ChildLock mode
H) Shopping mode
I) Eco mode
J) Holiday mode
3.3 Switching on
1. Connect the mains plug to the power
socket.
2. Press the appliance ON/OFF if the
display is off. The temperature
indicators show the set default
temperature.
To select a different set temperature
refer to "Temperature regulation".
ENGLISH 27
If "DEMO" appears on the display, refer
to "Troubleshooting" .
3.4 Switching off
Press ON/OFF for 3 seconds.
The display switches off.
To disconnect the appliance from the
power, disconnect the mains plug from
the power socket.
3.5 Temperature regulation
The set temperature of the fridge may be
adjusted by pressing the temperature
button.
Default set temperature:
+4°C for the fridge
The temperature indicator shows the set
temperature. The set temperature will be
reached within 24 hours.
After a power failure the set
temperature remains stored.
3.6 ChildLock mode
To lock any possible operation through
the buttons select the ChildLock mode.
Water dispensing and the light is not
locked in this mode.
1. To switch on the function press
ChildLock for 3 seconds.
The ChildLock mode indicator is shown.
2. To switch off the function press
ChildLock for 3 seconds.
The ChildLock mode indicator goes off.
3.7 Holiday mode
This function allows you to keep the
refrigerator closed and empty during a
long holiday period without the formation
of a bad smell.
The fridge compartment
must be empty with Holiday
mode on.
1. To switch on the function press Mode
until the corresponding icon appears.
The Holiday indicator goes on.
The fridge temperature indicator shows
the set temperature.
2. To switch off the function press Mode
in order to select an other function or
press Mode until you can see none of
the special icons.
The Holiday indicator goes off.
The function switches off by
selecting a different fridge
set temperature.
3.8 Eco mode
For optimal food storage select the Eco
mode.
1. To switch on the function press Mode
until the corresponding icon appears.
After a few seconds the Eco mode
indicator goes on.
The temperature indicator shows the set
temperature:
for the fridge: +4°C.
2. To switch off the function press Mode
in order to select an other function or
press the Mode until you can see
none of the special icons.
After a few seconds the Eco mode
indicator goes off.
The function switches off by
selecting a different set
temperature.
3.9 ExtraHumidity mode
If you need to increase the humidity in
the refrigerator, we suggest activating
the ExtraHumidity function.
1. To switch on the function press Mode
until the corresponding icon appears.
The ExtraHumidity indicator goes on.
2. To switch off the function press Mode
in order to select an other function or
press Mode until you can see none of
the special icons.
The ExtraHumidity indicator goes off.
3.10 Shopping mode
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest activating
the Shopping mode to chill the products
more rapidly and to avoid warming the
other food which is already in the
refrigerator.
www.electrolux.com28
The Shopping mode shuts off
automatically after approximately 6
hours.
The function switches off by
selecting a different fridge
set temperature.
1. To switch on the function do one of
the following:
Press Shopping mode.
Press Mode until the
corresponding icon appears.
The Shopping mode indicator appears.
2. To switch off the function before its
automatic end do one of the
following:
Press Shopping mode.
Press Mode in order to select an
other function or until you can see
none of the special icons.
The Shopping mode indicator goes off.
3.11 Door open alarm
An acoustic alarm will sound if the door is
left open for a few minutes. The door
open alarm conditions are indicated by:
flashing Alarm light
acoustic buzzer
When normal conditions are restored
(door closed), the alarm will stop.
During the alarm, the buzzer can be
switched off by pressing alarm button.
3.12 Selecting and dispensing
water
Before dispensing water, select either
still cold water, low sparkling water or
high sparkling water.
The actual choice is indicated by the
indicator.
1. Water is dispensed by pressing a
glass or other container towards the
flap.
2. Draw back the glass or container to
stop the water flow and the indicator
goes off after a few seconds.
Any water that drips or is spilled is
collected in the drip tray below the
water dispenser. The drip tray can be
detached and emptied when
necessary.
3.13 Lighting
The water dispenser lighting illuminates
automatically when water is dispensed.
3.14 For continuous lighting
Press the light button and the lighting
goes on.
Brightness is now about 20% until the
dispenser is used.
3.15 Switch off the lighting
Press the light button and the lighting
goes out.
3.16 Water filter indicator
1. When the water filter indicator lights
up the water filter has about 20%
remaining lifetime.
In this situation, it is recommended
that you buy a replacement filter.
2. When the water filter indicator starts
flashing, the water filter lifetime is
consumed . Replace the water filter
without delay, refer to "Installation of
the water filter".
3. When the water filter is replaced.
a. Press the filter reset button for 3
seconds to reset the water filter
indicator.
3.17 Water circuit cleaning
1. If you need to clean the water system
press Mode until the corresponding
icon appears.
After a few seconds the still cold water
indicator goes on.
Water select locked into still cold water.
2. Dispensing water in total 2 minutes.
The water system is cleaned.
The water circuit cleaning and the still
cold water indicator goes off.
3. To switch off the function before its
automatic end press Mode until the
corresponding icon appears.
After a few seconds the water circuit
cleaning and the still cold water indicator
goes off.
ENGLISH 29
4. DAILY USE
WARNING!
Refer to Safety chapters.
4.1 Positioning the door
shelves
To permit storage of food packages of
various sizes, the door shelves can be
placed at different heights.
CAUTION!
Do not move the big lower
door shelf to ensure correct
air circulation.
Gradually pull the shelf in the direction of
the arrows until it comes free, then
reposition as required.
4.2 Bottle rack
1. Place the bottles (with the opening
facing front) in the pre-positioned
shelf.
If the shelf is positioned
horizontally, place only
closed bottles.
2. To store previously opened bottles,
pull the shelf up so it can rotate
upwards and be placed on the next
higher level.
A few positions can't be
used due to interference with
the temperature sensor.
4.3 Movable shelves
The walls of the refrigerator are equipped
with a series of shelves support so that
the shelves can be positioned as
desired.
Some shelves must be lifted up by the
rear edge to enable them to be removed.
The shelf (A) above the
water module is
recommended to be placed
as shown for good air
circulation.
Do not move the glass shelf
above the vegetable drawer
to ensure correct air
circulation.
www.electrolux.com30
A
4.4 Vegetable Drawer
The drawer is suitable for storing fruit
and vegetables.
Some models have a separator inside
the drawer that can be placed in different
positions to allow for the subdivision best
suited to personal needs.
All parts inside the drawer can be
removed for cleaning purposes.
4.5 Taste Guard filter
Your appliance is equipped with a carbon
filter behind the air lever flap.
The filter purifies the air from unwanted
odours in the fridge compartment
preserving food quality.
On delivery the filter is in a plastic bag.
Refer to "Installation of the Taste Guard
filter" for instructions.
Make sure that the air lever
flap is closed to obtain
proper function.
4.6 Cleaning the interior
1. Before using the appliance for the
first time, wash the interior and all
internal accessories with lukewarm
water and neutral soap so as to
remove the typical smell of a brand-
new product, then dry thoroughly.
2. Check that the drain hose at the rear
of the cabinet discharges into the drip
tray.
CAUTION!
Do not use detergents or
abrasive powders, as these
will damage the finish.
5. HINTS AND TIPS
5.1 Normal operating sounds
The following sounds are normal during
operation:
A faint gurgling and bubbling sound
from coils sound when refrigerant is
pumped.
A whirring and pulsating sound from
the compressor when refrigerant is
pumped.
A sudden cracking noise from inside
appliance caused by thermic dilatation
(a natural and not dangerous physical
phenomenon).
A faint click noise from the
temperature regulator when the
compressor switches on or off.
5.2 Hints for energy saving
Do not open the door frequently or
leave it open longer than absolutely
necessary.
Place the shelf above the water
module as described in the "Daily
use" chapter.
5.3 Hints for fresh food
refrigeration
To obtain the best performance:
do not store warm food or evaporating
liquids in the refrigerator
do cover or wrap the food, particularly
if it has a strong flavour
ENGLISH 31
position food so that air can circulate
freely around it
5.4 Hints for refrigeration
Useful hints:
Meat (all types) : wrap in polythene
bags and place on the glass shelf
above the vegetable drawer.
For safety, store in this way only one
or two days at the most.
Cooked foods, cold dishes, etc. :
these should be covered and may be
placed on any shelf.
Fruit and vegetables: these should be
thoroughly cleaned and placed in the
special drawer(s) provided.
Butter and cheese: these should be
placed in special airtight containers or
wrapped in aluminium foil or
polythene bags to exclude as much
air as possible.
Bottles: these need a cap and should
be stored on the door bottle shelf, or
(if equipped) on the bottle rack.
Bananas, potatoes, onions and garlic,
if not packed, must not be kept in the
refrigerator.
5.5 Hints for temperature inside
the fridge
A suitable temperature inside the
fridge is approx. +4° C. If the
temperature regulator is set to a cold
temperature, the ambient temperature
is high or if the fridge is fully loaded
the compressor will run for a longer
time. If too cold, change to a higher
temperature setting.
CAUTION!
Do not place food against
or close to the
temperature sensor (A).
This can result in too cold
temperatures.
A
If you want to check the temperature
of food stored in the refrigerator, place
a glass of water centrally in the
cabinet, and put a proper
thermometer with an accuracy of +/–
1 °C into it. After 6 hours the
temperature can be monitored. The
measuring shall be performed under
steady-stated conditions (without
changing the load).
6. CARE AND CLEANING
WARNING!
Refer to Safety chapters.
6.1 General warnings
CAUTION!
Unplug the appliance before
carrying out any
maintenance operation.
This appliance contains
hydrocarbons in its cooling
unit; maintenance and
recharging must therefore
only be carried out by
authorized technicians.
The accessories and parts of
the appliance are not
suitable for washing in a
dishwasher.
6.2 Periodic cleaning
CAUTION!
Do not pull, move or damage
any pipes and/or cables
inside the cabinet.
CAUTION!
Take care of not to damage
the cooling system.
www.electrolux.com32
CAUTION!
When moving the cabinet, lift
it by the front edge to avoid
scratching the floor.
The equipment has to be cleaned
regularly:
1. Clean the inside and accessories
with lukewarm water and some
neutral soap.
2. Regularly check the door seals and
wipe clean to ensure they are clean
and free from debris.
3. Rinse and dry thoroughly.
4. If accessible, clean the condenser
and the compressor at the back of
the appliance with a brush.
This operation will improve the
performance of the appliance and
save electricity consumption.
6.3 Defrosting the refrigerator
Frost is automatically eliminated from the
evaporator of the refrigerator
compartment every time the motor
compressor stops, during normal use.
The defrost water drains out through a
drain hole into a special container at the
back of the appliance, over the motor
compressor, where it evaporates.
6.4 Replacing the Taste Guard
filter
To get the best performance the Taste
Guard filter should be replaced once
every year.
New active filters can be purchased from
your local dealer.
Refer to "Installation of the Taste Guard
filter" for instructions.
6.5 Replacing the water filter
Refer to "Installation of the water filter".
The water connection does
not need to be switched off
when changing the filter.
Replacement filters can be ordered from
Authorised Service Centre.
1. Remove the filter. A small amount of
water will run out.
2. Dry off and fit the new filter.
6.6 Replacing the gas cylinder
Remove the gas cylinder, refer to
"Installation of the gas cylinder".
The replacement gas cylinder is obtained
through your local dealer.
6.7 Cleaning the water
dispenser
Lime deposits on the dispenser surface
can removed using vinegar or diluted
acetic acid as cleaning agent.
The dispenser drip tray can be cleaned
with a lukewarm water and some neutral
soap.
1. When necessary, clean the surfaces
of the dispenser, using only a soft
cloth and warm water.
2. Wipe clean with a damp cloth.
6.8 Cleaning the ventilation
grille
Make sure the door is open.
The ventilation grille can be removed for
washing.
1. Loosen the edge of the grille by
pulling it according to the figure.
2. Pull the grille straight out to
completely remove it.
3. Vacuum clean under the cabinet.
6.9 Periods of non-operation
When the water system is not used for a
long period, turn off the water
connection.
ENGLISH 33
When the appliance is not in use for long
periods, take the following precautions:
1. Disconnect the appliance from
electricity supply.
2. Remove all food.
3. Clean the appliance and all
accessories.
4. Leave the door/doors open to
prevent unpleasant smells.
Before using the appliance again, rinse
the system thoroughly by dispensing at
least three liters (5 pints) of water.
WARNING!
If you want to keep the
appliance switched on, ask
somebody to check it once
in a while to prevent the food
inside from spoiling in case
of a power failure.
We recommend activating
Holiday mode.
7. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
7.1 What to do if...
Problem Possible cause Solution
The appliance does not
operate.
The appliance is switch‐
ed off.
Switch on the appliance.
The mains plug is not
connected to the mains
socket correctly.
Connect the mains plug to
the mains socket correctly.
There is no voltage in the
mains socket.
Connect a different electrical
appliance to the mains sock‐
et. Contact a qualified elec‐
trician.
The appliance is noisy. The appliance is not sup‐
ported properly.
Check if the appliance
stands stable.
Sound level is too high
during dispensing of wa‐
ter.
The transport supporting tie
of the water system pressure
pump has not been re‐
moved. Refer to “Removing
the transport support”.
Audible or visual alarm is
on.
The door is not closed
correctly.
Refer to "Door open alarm".
A rectangular symbol is
shown instead of numbers
on the Temperature Dis‐
play.
Temperature sensor
problem.
Contact the nearest Author‐
ised Service Centre (the
cooling system will continue
to keep food products cold,
but temperature adjustment
will not be possible).
The lamp does not work. The lamp is in stand-by. Close and open the door.
www.electrolux.com34
Problem Possible cause Solution
The lamp does not work. The lamp is defective. Contact the nearest Author‐
ised Service Centre.
The compressor operates
continually.
Temperature is set incor‐
rectly.
Refer to "Operation" chapter.
Many food products were
put in at the same time.
Wait some hours and then
check the temperature
again.
The room temperature is
too high.
Refer to climate class chart
on the rating plate.
Food products placed in
the appliance were too
warm.
Allow food products to cool
to room temperature before
storing.
The door is not closed
correctly.
Refer to "Closing the door".
The Shopping function is
switched on.
Refer to "Shopping function".
There is too much frost
and ice.
The door is not closed
correctly or the gasket is
deformed/dirty.
Refer to "Closing the door".
The compressor does not
start immediately after
pressing the Shopping, or
after changing the temper‐
ature.
This is normal, no error
has occurred.
The compressor starts after
a period of time.
Water flows inside the re‐
frigerator.
The water outlet is clog‐
ged.
Clean the water outlet.
Food products prevent
that water flows into the
water collector.
Make sure that food prod‐
ucts do not touch the rear
plate.
Water flows on the floor. The melting water outlet
is not connected to the
evaporative tray above
the compressor.
Attach the melting water out‐
let to the evaporative tray.
Temperature cannot be
set.
The Shopping function is
switched on.
Switch off Shopping manual‐
ly, or wait until the function
resets automatically to set
the temperature. Refer to "
Shopping function".
ENGLISH 35
Problem Possible cause Solution
DEMO appears on the dis‐
play.
The appliance is in dem‐
onstration mode.
Keep the Mode pressed for
approximately 10 seconds
until a long sound is heard
and display shuts off for a
short time.
Door is misaligned or inter‐
feres with ventilation grill.
The appliance is not lev‐
elled.
Refer to "Levelling".
There is not enough car‐
bon dioxide in the water.
The carbon dioxide is
running out.
Refer to "Installation of the
gas cylinder".
The incoming water pres‐
sure is too low.
Drain off a large amount of
carbonated water (about 1 li‐
tre).
There is too much carbon
dioxide in the water.
Dilute with ordinary water.
(See "The functions of the
water dispenser" in "Opera‐
tion" chapter).
Dilute with ordinary wa‐
ter.
Refer to "Selecting and dis‐
pensing water".
No carbon dioxide. The gas cylinder is emp‐
ty.
Refer to "Replacing gas cyl‐
inder".
No or very low water flow. The gas cylinder is emp‐
ty.
Refer to "Replacing gas cyl‐
inder".
Sediment in the water. Remove and clean the
strainer in the inlet hose con‐
nection.
Water supply obstructed. Check water supply.
Only gas comes out when
dispensing carbonated wa‐
ter.
Sediment in the water. Remove and clean the
strainer in the inlet hose con‐
nection.
Dispensing is interrupted
after a short time.
The maximum time of
two minutes is exceeded.
Start new dispensing.
The "Water circuit clean‐
ing" and "Still cold water"
indicators are shown.
No water has been dis‐
pensed in 10 days.
Dispense water in total 2 mi‐
nutes and the icons goes off.
The buzzer sounds. The
"Alarm" icon and "Extra
Humidity" icons are flash‐
ing.
Failed water supplies. "Press any button to reset
the alarm. Select still cold
water and push the water
dispensing lever and re‐
lease. The water pump start
and filling the water system.
After a few minutes the icons
goes off.
www.electrolux.com36
Problem Possible cause Solution
Dispensing water more
than 2 minutes.
Release the water dispens‐
ing lever and press any but‐
ton to reset the alarm. Start
new dispensing.
The water filter indicator
flashes.
The filter has been totally
consumed.
Refer to "Replacing the wa‐
ter filter".
The water filter indicator
lights constantly.
20% of filter capacity re‐
mains.
Buy a new filter.
The temperature in the ap‐
pliance is too low/too high.
The temperature regula‐
tor is not set correctly.
Set a higher/lower tempera‐
ture.
The door is not closed
correctly.
Refer to "Closing the door".
Food products placed in
the appliance were too
warm.
Allow food products to cool
to room temperature before
storing.
Many food products were
put in at the same time.
Wait some hours and then
check the temperature
again.
The door has been
opened often.
Open the door only if neces‐
sary.
The Shopping function is
switched on.
Refer to "Shopping function".
There is no cold air circu‐
lation in the appliance.
Make sure that there is cold
air circulation in the appli‐
ance.
If the advice does not lead to
the desired result, call the
nearest Authorised Service
Centre.
7.2 Replacing the lamp
The appliance is equipped with a longlife
LED interior light.
Only service is allowed to replace the
lighting device. Contact your Authorised
Service Centre.
7.3 Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer
to "Installation".
3. If necessary, replace the defective
door gaskets. Contact the Authorised
Service Centre.
8. INSTALLATION
WARNING!
Refer to Safety chapters.
8.1 Positioning
This appliance can be installed in a dry,
well ventilated indoor where the ambient
ENGLISH 37
temperature corresponds to the climate
class indicated on the rating plate of the
appliance:
Climate
class
Ambient temperature
SN +10°C to + 32°C
N +16°C to + 32°C
ST +16°C to + 38°C
T +16°C to + 43°C
Some functional problems
might occur for some types
of models when operating
outside of that range. The
correct operation can only
be guaranteed within the
specified temperature range.
If you have any doubts
regarding where to install the
appliance, please turn to the
vendor, to our customer
service or to the nearest
Authorised Service Centre.
8.2 Electrical connection
Before plugging in, ensure that the
voltage and frequency shown on the
rating plate correspond to your
domestic power supply.
The appliance must be earthed. The
power supply cable plug is provided
with a contact for this purpose. If the
domestic power supply socket is not
earthed, connect the appliance to a
separate earth in compliance with
current regulations, consulting a
qualified electrician.
The manufacturer declines all
responsibility if the above safety
precautions are not observed.
This appliance complies with the
E.E.C. Directives.
8.3 Location
To ensure best performance, if the
appliance is positioned below an
overhanging wall unit, the minimum
distance between the top of the cabinet
and the wall unit must be at least 40 mm.
Ideally, however, the appliance should
not be positioned below overhanging wall
units.
The ventilation space can be:
directly above the appliance
behind and above the top cupboard.
In this case, the space behind the top
cupboard must be at least 50 mm
deep.
50 mm
8.4 Removing the transport
support
Your appliance is equipped with
transport support to secure the door
during transportation.
1. Open the door.
2. Remove the transport support (2)
from the door sides.
3. Remove the transport support (3)
from the lower hinge (some models).
www.electrolux.com38
2
3
4. Remove the transport support (4)
from underneath the water unit.
5. Cut the pump securing tie (5) and
remove it.
4
5
CAUTION!
Some models are fitted with
a silencing pad under the
cabinet. Do not remove this
pad.
8.5 Rear spacers
Install the two spacers and the locking
pins provided within the accessory bag
as shown in the figure.
8.6 Connecting the water hose.
Water supply should be provided with a
tap and 3/4" male connector within 1,5 m
from the appliance.
This work is to be carried out by a skilled
plumber.
There are different type-approved taps
and tap assemblies on the market.
The water hose must not be cracked,
squeezed or put in tight bends.
The safety valve provided in a package
inside the appliance should be used to
prevent overflow. Before the safety valve
is placed on the tap, turn the pointer
clockwise to number 10 with the
enclosed plastic key. Install the safety
valve on the tap and let at least 10 litres
of water flow through the device. Before
connecting the appliance turn the pointer
to number 1 on the safety valve. If the
safety valve has shut off, detach it and
press the red plunger which is located
inside the lower housing of the device
itself.
Before the appliance is placed its final
location, ensure that the water
connection has been correctly carried
out, that there is no leakage at the
connection to the water tap.
Tighten the screw enough by hand.
Make sure that the gasket is properly
positioned in the connector.
We recommend that the appliance is
placed on a "run-off" mat intended for
refrigerators and freezers, which makes it
easier to detect possible leakage
ENGLISH 39
8.7 Starting the water system
for the first time
Ensure proper connection to the water
supply, refer to "Connecting the water
hose".
1. Open the tap on the water
connection.
2. Start the refrigerator.
The water system main valve opens and
the pump starts to fill the system.
Water from final inspection
testing may be resident in
the appliance. Dispense and
discard at least 2 litres of
plain water and 1 litre of
carbonated water prior to
use.
8.8 Levelling
When placing the appliance ensure that
it stands level. If necessary adjust the
feet using the adjustment spanner
supplied. Door alignment is dependent
on proper levelling.
8.9 Installation of the Taste
Guard filter
CAUTION!
The filter should be handled
carefully so fragments do not
loosen from the surface.
Make sure that the air lever
flap is closed to obtain
proper function.
The Taste Guard filter is an active carbon
filter which absorbs bad odors maintain
the best flavour and aroma for all
foodstuffs without risk of odor cross
contamination.
On delivery the carbon filter is in a plastic
bag to preserve performance.
1. Open the air lever flap.
2. Take the filter out of the plastic bag.
3. Insert the filter in the slot found in the
back of the air lever flap.
4. Close the air lever flap.
8.10 Installation of the water
filter.
1. Unpack the filter.
2. Remove the accessories in front of
the water module and open the
service hatch.
3. Place a cloth or a piece of kitchen
towel in the space beneath the water
filter.
4. Pull the bypass cartridge outwards,
grasping the lower part, until the
water bypass cartridge is
automatically ejected.
5. Remove the protective wrapping of
the new water filter and insert the
www.electrolux.com40
new filter firmly into the filter
connection.
6. Push the water filter back to its
original position.
7. Remove cloth or towel and make
sure that spilled water is wiped off.
8. Close the hatch and remount the
interior.
9. Keep the bypass cartridge for future
use.
10. Select Still cold water and dispense
about 2 litres of water. There may be
some air to start with.
1
2
8.11 Installation of the gas
cylinder.
If the gas cylinder is already
installed, remove the
transport support and turn
the lever upwards. Refer to
point 3.
1. Remove the gas cylinder wrapping
and screw on the adapter to the gas
cylinder. Tighten by hand only.
2. Position the gas cylinder with the
adapter attached underneath the
valve and ensure that the hooks of
the lever system supports the
protruding parts of the adapter.
1
2
3. Turn the lever upwards in one
continuous movement.
3
4
8.12 Door reversibility
In case you want to change the opening
direction of the door, contact the nearest
Authorised Service Centre. The
Authorised Service specialist will carry
out the reversibility of the doors at your
cost.
ENGLISH 41
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72

Electrolux ERF3869SOX User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI