Electrolux ERF3867SOX User manual

Page is loading ...

CONTENTS

1. SAFETY INFORMATION.................................................................................... 24

2. SAFETY INSTRUCTIONS...................................................................................25

3. OPERATION...................................................................................................... 27

4. DAILY USE........................................................................................................ 30

5. HINTS AND TIPS............................................................................................... 31

6. CARE AND CLEANING......................................................................................32

7. TROUBLESHOOTING........................................................................................34

8. INSTALLATION..................................................................................................37

9. NOISES............................................................................................................. 41

10. TECHNICAL INFORMATION............................................................................42

WE’RE THINKING OF YOU

Thank you for purchasing an Electrolux appliance. You’ve chosen a product that

brings with it decades of professional experience and innovation. Ingenious and

stylish, it has been designed with you in mind. So whenever you use it, you can be

safe in the knowledge that you’ll get great results every time.

Welcome to Electrolux.

Visit our website for:

Get usage advice, brochures, trouble shooter, service information:

www.electrolux.com

Register your product for better service:

www.registerelectrolux.com

Buy Accessories, Consumables and Original spare parts for your appliance:

www.electrolux.com/shop

CUSTOMER CARE AND SERVICE

Always use original spare parts.

When contacting our Authorised Service Centre, ensure that you have the following

data available: Model, PNC, Serial Number.

The information can be found on the rating plate.

Warning / Caution-Safety information

General information and tips

Environmental information

Subject to change without notice.

ENGLISH

23

1. SAFETY INFORMATION

Before the installation and use of the appliance, carefully

read the supplied instructions. The manufacturer is not

responsible if an incorrect installation and use causes

injuries and damages. Always keep the instructions with

the appliance for future reference.

1.1 Children and vulnerable people safety

• This appliance can be used by children aged from 8

years and above and persons with reduced physical,

sensory or mental capabilities or lack of experience and

knowledge if they have been given supervision or

instruction concerning use of the appliance in a safe

way and understand the hazards involved.

• Do not let children play with the appliance.

• Cleaning and user maintenance shall not be made by

children without supervision.

•

Keep all packaging away from children.

1.2 General Safety

• This appliance is intended to be used in household and

similar applications such as:

– Farm houses; staff kitchen areas in shops, offices

and other working environments

– By clients in hotels, motels, bed and breakfast and

other residential type environments

• Keep ventilation openings, in the appliance enclosure or

in the built-in structure, clear of obstruction.

• Do not use mechanical devices or other means to

accelerate the defrosting process, other than those

recommended by the manufacturer.

• Do not damage the refrigerant circuit.

• Do not use electrical appliances inside the food storage

compartments of the appliance, unless they are of the

type recommended by the manufacturer.

• Do not use water spray and steam to clean the

appliance.

www.electrolux.com24

• Clean the appliance with a moist soft cloth. Only use

neutral detergents. Do not use abrasive products,

abrasive cleaning pads, solvents or metal objects.

• Do not store explosive substances such as aerosol

cans with a flammable propellant in this appliance.

• If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

• If the appliance is equipped with an Ice maker or a

water dispenser, fill them with potable water only.

• If the appliance requires a water connection, connect it

to potable water supply only.

• The inlet water pressure (minimum and maximum) must

be between 1 bar (0,1 MPa) and 10 bar (1 MPa)

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must

install this appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Obey the installation instruction

supplied with the appliance.

• Always be careful when you move the

appliance because it is heavy. Always

wear safety gloves.

• Make sure the air can circulate around

the appliance.

• Wait at least 4 hours before connecting

the appliance to the power supply. This

is to allow the oil to flow back in the

compressor.

• Do not install the appliance close to

radiators or cookers, oven or hobs.

• The rear of the appliance must stand

against the wall.

• Do not install the appliance where

there is direct sunlight.

• Do not install this appliance in areas

that are too humid or too colds, such

as the construction appendices,

garages or wine cellars.

• When you move the appliance, lift it by

the front edge to avoid scratching the

floor.

2.2 Electrical connection

WARNING!

Risk of fire and electrical

shock.

• The appliance must be earthed.

• Make sure that the electrical

information on the rating plate agrees

with the power supply. If not, contact

an electrician.

• Always use a correctly installed

shockproof socket.

• Do not use multi-plug adapters and

extension cables.

• Make sure not to cause damage to the

electrical components (e.g. mains plug,

mains cable, compressor). Contact the

Service or an electrician to change the

electrical components.

• The mains cable must stay below the

level of the mains plug.

• Connect the mains plug to the mains

socket only at the end of the

installation. Make sure that there is

access to the mains plug after the

installation.

ENGLISH

25

• Do not pull the mains cable to

disconnect the appliance. Always pull

the mains plug.

2.3 Use

WARNING!

Risk of injury, burns, electrical

shock or fire.

• Do not change the specification of this

appliance.

• Do not put electrical appliances (e.g.

ice cream makers) in the appliance

unless they are stated applicable by

the manufacturer.

• Be careful not to cause damage to the

refrigerant circuit. It contains isobutane

(R600a), a natural gas with a high level

of environmental compatibility. This gas

is flammable.

• If damage occurs to the refrigerant

circuit, make sure that there are no

flames and sources of ignition in the

room. Ventilate the room.

• Do not let hot items to touch the plastic

parts of the appliance.

• Do not store flammable gas and liquid

in the appliance.

• Do not put flammable products or

items that are wet with flammable

products in, near or on the appliance.

• Do not touch the compressor or the

condenser. They are hot.

2.4 Care and cleaning

WARNING!

Risk of injury or damage to

the appliance.

• Before maintenance, deactivate the

appliance and disconnect the mains

plug from the mains socket.

• This appliance contains hydrocarbons

in the cooling unit. Only a qualified

person must do the maintenance and

the recharging of the unit.

• Regularly examine the drain of the

appliance and if necessary, clean it. If

the drain is blocked, defrosted water

collects in the bottom of the appliance.

2.5 Disposal

WARNING!

Risk of injury or suffocation.

• Disconnect the appliance from the

mains supply.

• Cut off the mains cable and discard it.

• Remove the door to prevent children

and pets to be closed inside of the

appliance.

• The refrigerant circuit and the insulation

materials of this appliance are ozone-

friendly.

• The insulation foam contains flammable

gas. Contact your municipal authority

for information on how to discard the

appliance correctly.

• Do not cause damage to the part of

the cooling unit that is near the heat

exchanger.

www.electrolux.com26

3. OPERATION

3.1 Control panel

1 2

3

4

5

6

10

11

9

7

8

1

Temperature button

2

Display

3

ON/OFF button

4

ShoppingMode button

5

Light/Filter reset button

6

High sparkling water

7

Low sparkling water

8

Dispenser lever

9

Still cold water

10

ChildLock button

11

Mode button

It is possible to change predefined sound

of buttons to a loudly one by pressing

together Mode button and Temperature

colder button for some seconds. Change

is reversible.

3.2 Display

A B

C

D

E

FG

H

I

J

A) ExtraHumidity function

B) Temperature indicator

C) Water choice indicator

D) Water circuit cleaning

E) Alarm indicator

F) Water filter indicator

G) ChildLock function

H) ShoppingMode

I) EcoMode

J) Holiday function

3.3 Switching on

1. Connect the mains plug to the power

socket.

2. If the display is off, press ON/OFF.

If DEMO appears on the display, the

appliance is in demonstration mode.

Refer to "What to do if...".

ENGLISH

27

The temperature indicators show the set

default temperature.

To select a different set

temperature refer to

"Temperature regulation".

CAUTION!

If the door remains open for

some minutes, the light will

turn off automatically. The

light is reset by closing and

opening the door itself.

3.4 Switching off

Press ON/OFF for 3 seconds.

The display switches off.

To disconnect the appliance

from the power disconnect

the mains plug from the

power socket.

3.5 Temperature regulation

The set temperature of the fridge may be

adjusted by pressing the temperature

button.

Default temperature:

• +4°C for the fridge

The temperature indicator shows the set

temperature.

The set temperature will be

reached within 24 hours.

After a power failure the set

temperature remains stored.

3.6 ChildLock function

To lock any possible operation through

the buttons select the ChildLock function.

Water dispensing and the light is not

locked in this mode.

1. To switch on the function press

ChildLock for 3 seconds.

The ChildLock indicator is shown.

2. To switch off the function press

ChildLock for 3 seconds.

The ChildLock indicator goes off.

3.7 ShoppingMode

If you need to insert a large amount of

warm food, for example after doing the

grocery shopping, activate the

ShoppingMode to chill products more

rapidly and to avoid warming other food

that is already in the refrigerator.

Press the ShoppingMode or Mode button.

The ShoppingMode indicator appears.

The ShoppingMode shuts off

automatically after approximately 6 hours.

To switch off the function before its

automatic end, repeat the procedure until

the ShoppingMode indicator turns off.

The function switches off by

selecting a different fridge set

temperature.

3.8 ExtraHumidity function

If you need to increase the humidity in the

refrigerator, we suggest activating the

ExtraHumidity function.

1. To switch on the function press Mode

until the corresponding icon appears.

The ExtraHumidity indicator goes on.

2. To switch off the function press Mode

in order to select an other function or

press Mode until you can see none of

the special icons.

The ExtraHumidity indicator goes off.

3.9 Holiday function

This function allows you to keep the

refrigerator closed and empty during a

long holiday period without the formation

of a bad smell.

The fridge compartment must

be empty with Holiday

function on.

1. To switch on the function press Mode

until the corresponding icon appears.

The Holiday indicator goes on.

The fridge temperature indicator shows

the set temperature.

2. To switch off the function press Mode

in order to select an other function or

press Mode until you can see none of

the special icons.

The Holiday indicator goes off.

www.electrolux.com28

The function switches off by

selecting a different fridge set

temperature.

3.10 EcoMode

For optimal food storage select the

EcoMode.

1. To switch on the function press Mode

until the corresponding icon appears.

After a few seconds the EcoMode

indicator goes on.

The temperature indicator shows the set

temperature:

• for the fridge: +4°C.

2. To switch off the function press Mode

in order to select an other function or

press the Mode until you can see

none of the special icons.

After a few seconds the EcoMode

indicator goes off.

The function switches off by

selecting a different set

temperature.

3.11 Door open alarm

An acoustic alarm will sound if the door is

left open for a few minutes. The door open

alarm conditions are indicated by:

• a flashing Alarm indicator;

• an acoustic buzzer.

When normal conditions are restored

(door closed), the alarm will stop. The

buzzer can also be switched off by

pressing any button.

3.12 Selecting and dispensing

water

Before dispensing water, select either still

cold water, low sparkling water or high

sparkling water.

The actual choice is indicated by the

indicator.

1. Water is dispensed by pressing a

glass or other container towards the

flap.

2. Draw back the glass or container to

stop the water flow and the indicator

goes off after a few seconds.

Any water that drips or is spilled is

collected in the drip tray below the

water dispenser. The drip tray can be

detached and emptied when

necessary.

3.13 Lighting

The water dispenser lighting illuminates

automatically when water is dispensed.

3.14 For continuous lighting

Make sure that the ice dispenser is

unlocked.

Press the Light button and the lighting

goes on.

Brightness is now about 20% until the

dispenser is used.

3.15 Switch off the lighting

Press the light button and the lighting

goes out.

3.16 Water filter indicator

1. When the water filter indicator lights

up the water filter has about 20%

remaining lifetime.

In this situation, it is recommended

that you buy a replacement filter.

2. When the water filter indicator starts

flashing, the water filter lifetime is

consumed . Replace the water filter

without delay, refer to "Installation of

the water filter".

3. When the water filter is replaced.

a. Press the filter reset button for 3

seconds to reset the water filter

indicator.

3.17 Water circuit cleaning

1. If you need to clean the water system

press Mode until the corresponding

icon appears.

After a few seconds the still cold water

indicator goes on.

Water select locked into still cold water.

2. Dispensing water in total 2 minutes.

The water system is cleaned.

The water circuit cleaning and the still cold

water indicator goes off.

3. To switch off the function before its

automatic end press Mode until the

corresponding icon appears.

ENGLISH

29

After a few seconds the water circuit

cleaning and the still cold water indicator

goes off.

4. DAILY USE

WARNING!

Refer to Safety chapters.

4.1 Taste Guard filter

Your appliance is equipped with a carbon

filter behind the air lever flap.

The filter purifies the air from unwanted

odours in the fridge compartment

preserving food quality.

On delivery the filter is in a plastic bag.

Refer to "Installation of the Taste Guard

filter" for instructions.

Make sure that the air lever

flap is closed to obtain proper

function.

4.2 Vegetable Drawer

The drawer is suitable for storing fruit and

vegetables.

Some models have a separator inside the

drawer that can be placed in different

positions to allow for the subdivision best

suited to personal needs.

All parts inside the drawer can be

removed for cleaning purposes.

4.3 Movable shelves

The walls of the refrigerator are equipped

with a series of shelves support so that

the shelves can be positioned as desired.

Some shelves must be lifted up by the

rear edge to enable them to be removed.

The shelf (A) above the water

module is recommended to

be placed as shown for good

air circulation.

Do not move the glass shelf

above the vegetable drawer

to ensure correct air

circulation.

A

4.4 Positioning the door shelves

To permit storage of food packages of

various sizes, the door shelves can be

placed at different heights.

To make these adjustments proceed as

follows:

1. Gradually pull in the direction of the

arrows until it comes free.

2. Reposition the shelf as required.

Do not move the big lower

door shelf to ensure correct

air circulation.

4.5 Bottle rack

1. Place the bottles (with the opening

facing front) in the pre-positioned

shelf.

www.electrolux.com30

If the shelf is positioned

horizontally, place only

closed bottles.

2. To store previously opened bottles,

pull the shelf up so it can rotate

upwards and be placed on the next

higher level.

A few positions can't be used

due to interference with the

temperature sensor.

4.6 Cleaning the interior

1. Before using the appliance for the first

time, wash the interior and all internal

accessories with lukewarm water and

neutral soap so as to remove the

typical smell of a brand-new product,

then dry thoroughly.

2. Check that the drain hose at the rear

of the cabinet discharges into the drip

tray.

CAUTION!

Do not use detergents or

abrasive powders, as these

will damage the finish.

5. HINTS AND TIPS

5.1 Normal operating sounds

The following sounds are normal during

operation:

• A faint gurgling and bubbling sound

from coils sound when refrigerant is

pumped.

• A whirring and pulsating sound from

the compressor when refrigerant is

pumped.

• A sudden cracking noise from inside

appliance caused by thermic dilatation

(a natural and not dangerous physical

phenomenon).

• A faint click noise from the temperature

regulator when the compressor

switches on or off.

5.2 Hints for energy saving

• Do not open the door frequently or

leave it open longer than absolutely

necessary.

• Place the shelf above the water module

as described in the "Daily use" chapter.

5.3 Hints for fresh food

refrigeration

To obtain the best performance:

• do not store warm food or evaporating

liquids in the refrigerator

• do cover or wrap the food, particularly

if it has a strong flavour

• position food so that air can circulate

freely around it

5.4 Hints for refrigeration

Useful hints:

ENGLISH

31

• Meat (all types) : wrap in polythene

bags and place on the glass shelf

above the vegetable drawer.

• For safety, store in this way only one or

two days at the most.

• Cooked foods, cold dishes, etc..: these

should be covered and may be placed

on any shelf.

• Fruit and vegetables: these should be

thoroughly cleaned and placed in the

special drawer(s) provided.

• Butter and cheese: these should be

placed in special airtight containers or

wrapped in aluminium foil or polythene

bags to exclude as much air as

possible.

• Bottles: these need a cap and should

be stored on the door bottle shelf, or (if

equipped) on the bottle rack.

• Bananas, potatoes, onions and garlic,

if not packed, must not be kept in the

refrigerator.

5.5 Hints for temperature inside

the fridge

• A suitable temperature inside the fridge

is approx. +4° C. If the temperature

regulator is set to a cold temperature,

the ambient temperature is high or if

the fridge is fully loaded the

compressor will run for a longer time. If

too cold, change to a higher

temperature setting.

CAUTION!

Do not place food against

or close to the

temperature sensor (A).

This can result in too cold

temperatures.

A

• If you want to check the temperature of

food stored in the refrigerator, place a

glass of water centrally in the cabinet,

and put a proper thermometer with an

accuracy of +/– 1 °C into it. After 6

hours the temperature can be

monitored. The measuring shall be

performed under steady-stated

conditions (without changing the load).

6. CARE AND CLEANING

WARNING!

Refer to Safety chapters.

6.1 General warnings

CAUTION!

Unplug the appliance before

carrying out any maintenance

operation.

This appliance contains

hydrocarbons in its cooling

unit; maintenance and

recharging must therefore

only be carried out by

authorized technicians.

The accessories and parts of

the appliance are not suitable

for washing in a dishwasher.

6.2 Periodic cleaning

CAUTION!

Do not pull, move or damage

any pipes and/or cables

inside the cabinet.

CAUTION!

Take care of not to damage

the cooling system.

CAUTION!

When moving the cabinet, lift

it by the front edge to avoid

scratching the floor.

www.electrolux.com32

The equipment has to be cleaned

regularly:

1. Clean the inside and accessories with

lukewarm water and some neutral

soap.

2. Regularly check the door seals and

wipe clean to ensure they are clean

and free from debris.

3. Rinse and dry thoroughly.

4. If accessible, clean the condenser and

the compressor at the back of the

appliance with a brush.

This operation will improve the

performance of the appliance and

save electricity consumption.

6.3 Cleaning the water dispenser

Lime deposits on the dispenser surface

can removed using vinegar or diluted

acetic acid as cleaning agent.

The dispenser drip tray can be cleaned

with a lukewarm water and some neutral

soap.

1. When necessary, clean the surfaces of

the dispenser, using only a soft cloth

and warm water.

2. Wipe clean with a damp cloth.

6.4 Cleaning the ventilation grille

Make sure the door is open.

The ventilation grille can be removed for

washing.

1. Loosen the edge of the grille by pulling

it according to the figure.

2. Pull the grille straight out to completely

remove it.

3. Vacuum clean under the cabinet.

6.5 Defrosting of the refrigerator

Frost is automatically eliminated from the

evaporator of the refrigerator

compartment every time the motor

compressor stops, during normal use. The

defrost water drains out through a trough

into a special container at the back of the

appliance, over the motor compressor,

where it evaporates.

6.6 Periods of non-operation

When the water system is not use for a

long period, turn off the water connection

to the refrigerator.

When the appliance is not in use for long

periods, take the following precautions:

1. Disconnect the appliance from

electricity supply.

2. Remove all food.

3. Clean the appliance and all

accessories.

4. Leave the door/doors open to prevent

unpleasant smells.

Before using the appliance again, rinse the

system thoroughly by dispensing at least

three liters (5 pints) of water.

WARNING!

If the cabinet will be kept on,

ask somebody to check it

once in a while to prevent the

food inside from spoiling in

case of a power failure.

6.7 Replacing the water filter

Refer to "Installation of the water filter".

The water connection does

not need to be switched off

when changing the filter.

Replacement filters can be ordered from

Authorised Service Centre.

1. Remove the filter. A small amount of

water will run out.

2. Dry off and fit the new filter.

6.8 Replacing the gas cylinder

Remove the gas cylinder, refer to

"Installation of the gas cylinder".

The replacement gas cylinder is obtained

through your local dealer.

ENGLISH

33

6.9 Replacing the Taste Guard

filter

To get the best performance the Taste

Guard filter should be replaced once every

year.

New active filters can be purchased from

your local dealer.

Refer to "Installation of the Taste Guard

filter" for instructions.

7. TROUBLESHOOTING

WARNING!

Refer to Safety chapters.

7.1 What to do if...

Problem Possible cause Solution

The appliance does not op-

erate.

The appliance is switched

off.

Switch on the appliance.

The mains plug is not

connected to the mains

socket correctly.

Connect the mains plug to

the mains socket correctly.

There is no voltage in the

mains socket.

Connect a different electrical

appliance to the mains sock-

et. Contact a qualified electri-

cian.

The appliance is noisy. The appliance is not sup-

ported properly.

Check if the appliance stands

stable.

Sound level is too high

during dispensing of wa-

ter.

The transport supporting tie

of the water system pressure

pump has not been removed.

Refer to “Removing the trans-

port support”.

Audible or visual alarm is

on.

The door is not closed

correctly.

Refer to "Door open alarm".

A rectangular symbol is

shown instead of numbers

on the Temperature Dis-

play.

Temperature sensor prob-

lem.

Contact the nearest Author-

ised Service Centre (the cool-

ing system will continue to

keep food products cold, but

temperature adjustment will

not be possible).

The lamp does not work. The lamp is in stand-by. Close and open the door.

The lamp does not work. The lamp is defective. Contact the nearest Author-

ised Service Centre.

The compressor operates

continually.

Temperature is set incor-

rectly.

Refer to "Operation" chapter.

www.electrolux.com34

Problem Possible cause Solution

Many food products were

put in at the same time.

Wait some hours and then

check the temperature again.

The room temperature is

too high.

Refer to climate class chart

on the rating plate.

Food products placed in

the appliance were too

warm.

Allow food products to cool

to room temperature before

storing.

The door is not closed

correctly.

Refer to "Closing the door".

The ShoppingMode func-

tion is switched on.

Refer to "ShoppingMode

function".

The compressor does not

start immediately after

pressing the Shopping-

Mode, or after changing the

temperature.

This is normal, no error

has occurred.

The compressor starts after a

period of time.

Water flows inside the re-

frigerator.

The water outlet is clog-

ged.

Clean the water outlet.

Food products prevent

that water flows into the

water collector.

Make sure that food products

do not touch the rear plate.

Water flows on the floor. The melting water outlet is

not connected to the

evaporative tray above the

compressor.

Attach the melting water out-

let to the evaporative tray.

Temperature cannot be set. The ShoppingMode func-

tion is switched on.

Switch off ShoppingMode

manually, or wait until the

function resets automatically

to set the temperature. Refer

to " ShoppingMode function".

DEMO appears on the dis-

play.

The appliance is in dem-

onstration mode.

Keep the Mode pressed for

approximately 10 seconds

until a long sound is heard

and display shuts off for a

short time.

Door is misaligned or inter-

feres with ventilation grill.

The appliance is not level-

led.

Refer to "Levelling".

There is not enough carbon

dioxide in the water.

The carbon dioxide is run-

ning out.

Refer to "Installation of the

gas cylinder".

The incoming water pres-

sure is too low.

Drain off a large amount of

carbonated water (about 1 li-

tre).

ENGLISH

35

Problem Possible cause Solution

There is too much carbon

dioxide in the water.

Dilute with ordinary water.

(See "The functions of the

water dispenser" in "Control

Panel"" chapter).

Dilute with ordinary water. Refer to "Selecting and dis-

pensing water".

No carbon dioxide. The gas cylinder is empty. Refer to "Replacing gas cylin-

der".

No or very low water flow. The gas cylinder is empty. Refer to "Replacing gas cylin-

der".

Sediment in the water. Remove and clean the strain-

er in the inlet hose connec-

tion.

Water supply obstructed. Check water supply.

Only gas comes out when

dispensing carbonated wa-

ter.

Sediment in the water. Remove and clean the strain-

er in the inlet hose connec-

tion.

Dispensing is interrupted af-

ter a short time.

The maximum time of two

minutes is exceeded.

Start new dispensing.

The "Water circuit cleaning"

and "Still cold water" indica-

tors are shown.

No water has been dis-

pensed in 10 days.

Dispense water in total 2 mi-

nutes and the icons goes off.

The buzzer sounds. The

"Alarm" icon and "Extra Hu-

midity" icons are flashing.

Failed water supplies. "Press any button to reset the

alarm. Select still cold water

and push the water dispens-

ing lever and release. The wa-

ter pump start and filling the

water system. After a few mi-

nutes the icons goes off.

Dispensing water more

than 2 minutes.

Release the water dispensing

lever and press any button to

reset the alarm. Start new

dispensing.

The water filter indicator

flashes.

The filter has been totally

consumed.

Refer to "Replacing the water

filter".

The water filter indicator

lights constantly.

20% of filter capacity re-

mains.

Buy a new filter.

The temperature in the ap-

pliance is too low/too high.

The temperature regulator

is not set correctly.

Set a higher/lower tempera-

ture.

The door is not closed

correctly.

Refer to "Closing the door".

www.electrolux.com36

Problem Possible cause Solution

Food products placed in

the appliance were too

warm.

Allow food products to cool

to room temperature before

storing.

Many food products were

put in at the same time.

Wait some hours and then

check the temperature again.

The door has been

opened often.

Open the door only if neces-

sary.

The ShoppingMode func-

tion is switched on.

Refer to "ShoppingMode

function".

There is no cold air circu-

lation in the appliance.

Make sure that there is cold

air circulation in the appli-

ance.

If the advice does not lead to

the desired result, call the

nearest Authorised Service

Centre.

7.2 Closing the door

1. Clean the door gaskets.

2. If necessary, adjust the door. Refer to

"Installation".

3. If necessary, replace the defective

door gaskets. Contact the Authorised

Service Centre.

7.3 Replacing the lamp

The appliance is equipped with a longlife

LED interior light.

Only service is allowed to replace the

lighting device. Contact your Authorised

Service Centre.

8. INSTALLATION

WARNING!

Refer to Safety chapters.

8.1 Positioning

This appliance can be installed in a dry,

well ventilated indoor where the ambient

temperature corresponds to the climate

class indicated on the rating plate of the

appliance:

Climate

class

Ambient temperature

SN +10°C to + 32°C

N +16°C to + 32°C

ST +16°C to + 38°C

Climate

class

Ambient temperature

T +16°C to + 43°C

Some functional problems

might occur for some types

of models when operating

outside of that range. The

correct operation can only be

guaranteed within the

specified temperature range.

If you have any doubts

regarding where to install the

appliance, please turn to the

vendor, to our customer

service or to the nearest

Service Centre

ENGLISH

37

8.2 Location

To ensure best performance, if the

appliance is positioned below an

overhanging wall unit, the minimum

distance between the top of the cabinet

and the wall unit must be at least 40 mm.

Ideally, however, the appliance should not

be positioned below overhanging wall

units.

The ventilation space can be:

• directly above the appliance

• behind and above the top cupboard.

In this case, the space behind the top

cupboard must be at least 50 mm

deep.

50 mm

8.3 Electrical connection

• Before plugging in, ensure that the

voltage and frequency shown on the

rating plate correspond to your

domestic power supply.

• The appliance must be earthed. The

power supply cable plug is provided

with a contact for this purpose. If the

domestic power supply socket is not

earthed, connect the appliance to a

separate earth in compliance with

current regulations, consulting a

qualified electrician.

• The manufacturer declines all

responsibility if the above safety

precautions are not observed.

• This appliance complies with the E.E.C.

Directives.

8.4 Rear spacers

Install the two spacers and the locking

pins provided within the accessory bag as

shown in the figure.

8.5 Levelling

When placing the appliance ensure that it

stands level. If necessary adjust the feet

using the adjustment spanner supplied.

Door alignment is dependent on proper

levelling.

8.6 Removing the transport

support

Your appliance is equipped with transport

support to secure the door during

transportation.

1. Open the door.

2. Remove the transport support (2) from

the door sides.

3. Remove the transport support (3) from

the lower hinge (some models).

www.electrolux.com38

2

3

4. Remove the transport support (4) from

underneath the water unit.

5. Cut the pump securing tie (5) and

remove it.

4

5

CAUTION!

Some models are fitted with a

silencing pad under the

cabinet. Do not remove this

pad.

8.7 Connecting the water hose.

Water supply should be provided with a

tap and 3/4" male connector within 1,5 m

from the appliance.

This work is to be carried out by a skilled

plumber.

There are different type-approved taps

and tap assemblies on the market.

The water hose must not be cracked,

squeezed or put in tight bends.

The safety valve provided in a package

inside the appliance should be used to

prevent overflow. Before the safety valve is

placed on the tap, turn the pointer

clockwise to number 10 with the enclosed

plastic key. Install the safety valve on the

tap and let at least 10 litres of water flow

through the device. Before connecting the

appliance turn the pointer to number 1 on

the safety valve. If the safety valve has

shut off, detach it and press the red

plunger which is located inside the lower

housing of the device itself.

Before the appliance is placed its final

location, ensure that the water connection

has been correctly carried out, that there

is no leakage at the connection to the

water tap.

Tighten the screw enough by hand.

Make sure that the gasket is properly

positioned in the connector.

We recommend that the appliance is

placed on a "run-off" mat intended for

refrigerators and freezers, which makes it

easier to detect possible leakage

8.8 Installation of the Taste

Guard filter

CAUTION!

The filter should be handled

carefully so fragments do not

loosen from the surface.

Make sure that the air lever

flap is closed to obtain proper

function.

The Taste Guard filter is an active carbon

filter which absorbs bad odors maintain

the best flavour and aroma for all

foodstuffs without risk of odor cross

contamination.

On delivery the carbon filter is in a plastic

bag to preserve performance.

1. Open the air lever flap.

2. Take the filter out of the plastic bag.

ENGLISH

39

3. Insert the filter in the slot found in the

back of the air lever flap.

4. Close the air lever flap.

8.9 Starting the water system for

the first time.

Ensure proper connection to the water

supply, refer to "Connecting the water

hose".

1. Open the tap on the water

connection.

2. Start the refrigerator.

The water system main valve opens and

the pump starts to fill the system.

Water from final inspection

testing may be resident in the

appliance. Dispense and

discard at least 2 litres of

plain water and 1 litre of

carbonated water prior to

use.

8.10 Installation of the water

filter.

1. Unpack the filter.

2. Remove the accessories in front of the

water module and open the service

hatch.

3. Place a cloth or a piece of kitchen

towel in the space beneath the water

filter.

4. Pull the bypass cartridge outwards,

grasping the lower part, until the water

bypass cartridge is automatically

ejected.

5. Remove the protective wrapping of

the new water filter and insert the new

filter firmly into the filter connection.

6. Push the water filter back to its original

position.

7. Remove cloth or towel and make sure

that spilled water is wiped off.

8. Close the hatch and remount the

interior.

9. Keep the bypass cartridge for future

use.

10. Select Still cold water and dispense

about 2 litres of water. There may be

some air to start with.

1

2

8.11 Installation of the gas

cylinder.

If the gas cylinder is already

installed, remove the

transport support and turn

the lever upwards. Refer to

point 3.

1. Remove the gas cylinder wrapping

and screw on the adapter to the gas

cylinder. Tighten by hand only.

www.electrolux.com40

2. Position the gas cylinder with the

adapter attached underneath the valve

and ensure that the hooks of the lever

system supports the protruding parts

of the adapter.

1

2

3. Turn the lever upwards in one

continuous movement.

3

4

8.12 Door reversibility

In case you want to change the opening

direction of the door, contact the nearest

Authorised Service Centre. The Authorised

Service specialist will carry out the

reversibility of the doors at your cost.

9. NOISES

There are some sounds during normal running (compressor, refrigerant circulation).

BRRR!

HISSS!

CLICK!

BLUBB!

CRACK!

SSSRR

R!

OK

ENGLISH

41

CLICK!

SSSRRR!

BRRR!

HISSS!

BLUBB!

CRACK!CRACK!

10. TECHNICAL INFORMATION

10.1 Technical data

Height mm 1800

Width mm 595

Depth mm 650

Voltage Volts 230 - 240

www.electrolux.com42

Page is loading ...

Electrolux ERF3867SOX User manual

This manual is also suitable for

Electrolux ERF3867SOX User manual

in other languages

Related papers

Other documents