5019 312 11077
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
ApproxProgrammeDuration*
(hours:minutes)
Mixed 40 3.0 45 0.43 1:00
White 40 6.0 55 0.65 2:45
Lightcolours 40 4.0 67 0.50 1:20
Dark 40 4.0 44 0.53 1:45
Cotton 95 6.0 59** 1.85 2:00
Cotton 60 6.0 55 1.02 2:30
Cotton 40 6.0 55 0.60 2:30
Synthetics 60 3.0 54** 0.85 1:40
Synthetics 40 3.0 50 0.50 1:25
Delicates 40 1.5 50 0.55 0:45
Wool/Handwash 40 1.0 40 0.55 0:35
Jeans 40 5.0 70 0.65 2:43
SuperSilent 60 6.0 55 0.78 4:00
AquaEco 40 2.5 19 0.43 1:00
Speed15´ 30 3.0 30 0.15 0:15
EcoCotton*** 60 6.0 55 0.90 3:30
CONSUMPTION DATA
Whirlpool is a registered trademark of Whirlpool USA.
Adddetergentasindicatedonthefrontpageandas
describedinthechapter“DetergentandAdditives”in
yourInstructionsforUse.
1. Turntheprogrammeselectortothedesired
programme.Thelightofthe“Start (Pause)”button
blinks.
2. Thetemperatureandspin speedindicatedonthe
displaycanbealteredbypressingthe“Temperature”
buttonorthe“Spin”button.
ConsumptionvaluesweremeasuredinnormalizedconditionsincompliancewithstandardIEC/EN60456.Consumptiondatainthehome
mayvarywithrespecttothevaluesinthetableinrelationtothewatersupplypressureandtemperature,theloadandthetypeofwash.
* Theremainingtimeindicatorcandeviatefromthevaluesinthetable,becauseittakesintoaccountthehouseholdconditions
applicableatthattime.
** Toreducethewatertemperature,somecoldwaterisaddedattheendofthemainwashcycle,beforethepumpdrainsthewaterout.
*** ReferenceProgrammeforEnergyLabel.
ADD DETERGENTS, CLOSE THE LID AND
SELECT THE PROGRAMME
“LID OPEN” INDICATION
Beforestartingandafterendofaprogramme,the
symbolappearsonthedisplaytoshowthatthelidcan
beopened.Aslongasawashprogrammeisrunning,
thelidremainslockedandmustonnoaccountbe
forcedopen.Incaseyouhaveanurgentneedtoopenit
duringarunningprogramme,referto“Resetarunning
programmebeforetheend”.
FAILURE INDICATIONS
Incaseofanyfailuresorirregularities,consultthe
“TroubleshootingGuide”inyourInstructionsforUse.
“Water tap closed”
Theappliancehasnoorinsufficientwatersupply.Open
thewatertap:iftheindicationsstilllightsup,refertothe
“TroubleshootingGuide”intheInstructionsforUse.
“Clean pump”
Wastewaterisnotpumpedout.Checkwhetherthe
drainhoseiskinkedorthefiltermustbecleaned;inthe
lattercaserefertotheInstructionsforUse(“Removing
theFilter”).
“Service”
Lightingupofthe“Service”indicationcanbecaused
byafaultinanelectricalcomponent.Refertothe
“TroubleshootingGuide”inyour“InstructionsforUse”;
ifthefaultpersists,contactourAfterSalesService.
“Rinse hold” button
• Thelaundryremainsinthelastrinsewaterwithout
progressingtothefinalspincycletoavoidcreasing
andpreventcoloursfromchanging.• Itis
particularlyusefulifyouwanttopostpone
spinningtoalatertime,orifyouwanttodrainonly.
• Ifyouselect“Rinsehold”,donotleaveitemsto
soakfortoolong.
Note:Theprogrammestopsto“Rinsehold”atthe
timethe“Rinsehold”symbolonthedisplaylights
up.Thelightnexttothe“Start(Pause)”button
blinks.
Terminate the “Rinse Hold” option:
• Pressthe“Start(Pause)”button;theprogramme
willterminateautomaticallywiththefinalspincycle
forthepresentwashprogramme.
• Ifyoudonotwishtospintheclothes,pressandhold
the“Reset/Drain“buttonforafewsecondstostart
thedrainprogramme.
“Clean+” button
• Choosethisoptionifyouuseanin-washadditivefor
stainremoval(powder,forexample“Vanish”)-it
willoptimizetheadditive’sefficiencytogetbetter
washperformanceandstainremoval.
• Choosetemperatureof30or40°Candusewith
maximumload.
• Addanappropriateamountofin-washadditivefor
stainremoval(powder)tothemainwashchamber,
togetherwithyourdetergent(onlyusepowder
detergentwiththisoption).
Respectthemanufacturer’sdosinginstructions.
• Prolongstheprogrammebyapprox.10to15minutes.
• Appropriateforuseofstainremoversandbleaches
onoxygenbasis.Chlorine or perborate bleaches
must not be used!
PROGRAMME START
Openthetapandpressthe“Start(Pause)” button.
Theblinkinglightnexttothe“Start(Pause)”button
becomesconstant.Theprogrammesequenceindicator
showsthecurrentprogrammephase,runningfromleft
torightthroughWash,Rinse,Spin/Drain.
PROGRAMME END
• Thesymbolsoftheprogrammesequenceindicator
aredark,andthe“Dooropen”indicationlightsup.
1. Turntheprogrammeselectortothe“Off/O”position.
2. Closethewatertap.
3. Openlidanddrumandunloadthemachine.
4. Leavethelidopentoallowtheinsideofthemachine
todry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Pressthe“Start(Pause)” buttontopausethe
programme.Thelightblinks.
2. Selectthenewprogramme,temperature,any
optionsandanotherspinspeedifyouwant.
3. Pressthe“Start(Pause)” buttonagain.Thenew
programmecontinuesatthesamepositionwhere
thepreviousprogrammewasinterrupted.Donot
adddetergentforthisprogramme.
RESET A RUNNING PROGRAMME BEFORE THE
END
The“Reset/Drain”buttoncancelsaprogramme
beforetheend.
• Pressthe“Reset/Drain”buttonforatleast3
seconds.Thewaterisdrainedout;itmaylastawhile
untilyoucanopenthelid.
SELECT ANY DESIRED OPTION
START DELAY
The“StartDelay”allowstorunthemachineatthe
consumer’sconvenience,forexampleatnightwhen
electricityischeaper.Donotuseliquiddetergentwhen
activatingthe“StartDelay”.
• Selectprogramme,temperature,spinspeedandoptions.
• Pressthe“StartDelay”buttontoselectthedelay
timeupto23hours.
• Pressthe“Start(Pause)”button.
Thecountdownofthedelaytimebegins;theclock
symbolnexttothedelaytimeandthedotbetween
hoursandminutesblink.
• Thetimedelayindicationdisappearswhenthe
programmestartsanditisreplacedbytheremaining
programmetime.
• Oncehavingpressedthe“Start(Pause)”button,the
numberofhourspreselectedcanbereducedby
pressingandholdingthe“StartDelay”button.From
onehouron,thedelaytimecanalsobereducedin
stepsof10minutes.
To cancel the “Start Delay”
..before you press the “Start(Pause)” button:
• Selectanotherprogrammeorpressthe“Reset/Drain”
button.
..after having pressed the “Start(Pause)” button:
• Press“Start (Pause)“-thedelaytimedisappears
fromthedisplay;press“Start (Pause)“againto
starttheselectedprogrammeimmediately.
LOCK BUTTONS
Youcanlockthebuttonsofthecontrolpanelagainst
improperuse(e.g.bychildren).
• Pressthetemperatureandspinspeedbutton
simultaneouslyandholdthemforatleast3seconds.
Thekeysymbolonthedisplaylightsup.
• Tounlockthebuttonsagain:proceedinthesameway.
Whenthecombinationofprogrammeandadditional
option(s)isnotpossible,theindicationlightsswitchoff
automatically.Unsuitablecombinationsofoptionsare
deselectedautomatically.
“Prewash” button
• Onlyforheavilysoiledloads(forexamplesand,
granulardirt).Increasesthecycletimeby
approximately15min.
• Donotuseliquiddetergentforthemainwashwhen
activatingthePrewashoption.
“Eco” button
• Withmodifiedtemperatureprofileandaslightly
prolognedwashingduration,theoptimum
combinationofexcellentwashingresultandeven
lowerenergyconsumptionisachieved.
“Intensive rinse” button
• Morewaterisaddedandrinsecycleisprolonged.
• Thisoptionisparticularlysuitableforareaswithvery
softwater,washingbabylinenandhelpingpeople
withallergies.
SAVE YOUR FAVOURITE PROGRAMMES
Ifthereisaprogrammesettingwhichyouusefrequently,
theapplianceoffersthepossibilitytosaveonesetting
foreachprogrammesothatitcanbeusedagainbyjust
pushingonebutton.
• Selectthedesiredprogramme,temperature,spin
speedandoption(s),pushandholdthe“Favourites”
buttonforatleast3seconds.
Thelampnextto“Favourites”shortlyflashesand
thenlightsup-theprogrammesettingsissaved.
Nexttimeyouwanttouseyourindividualprogramme
settings,selecttheprogramme,pushthe“Favourites”
buttonandstartbypushing“Start(Pause)”.
If you want to replace the saved programme
setting by another one:
• Selectthedesiredprogramme,temperature,spin
speedandoption(s),pushandholdthe“Favourites”
buttonforatleast3seconds.
Thepreviouslysavedprogrammesettingwillbe
replacedbythenewone.
“ Spin” button
• Everyprogrammehasapredefinedspinspeed.
• Pressthebuttontosetanotherspinspeed.
• Ifspinspeed“0”isselected,thefinalspinningis
cancelledbutintermediatespinpeaksremainduring
therinse.Thewaterisdrainedoutonly.