5019 312 11062
Programme
Temperature
(°C)
Load
(kg)
Water
(l)
Energy
(kWh)
ApproxProgrammeDuration*
(hours:minutes)
Mixed 40 3.0 45 0.43 1:00
White 40 6.0 55 0.65 2:45
Lightcolours 40 4.0 67 0.50 1:20
Dark 40 4.0 44 0.53 1:45
Cotton 95 6.0 59** 1.85 2:00
Cotton 60 6.0 55 1.02 2:30
Cotton 40 6.0 55 0.60 2:30
Synthetics 60 3.0 54** 0.85 1:40
Synthetics 40 3.0 50 0.50 1:25
Delicates 40 1.5 50 0.55 0:45
Wool/Handwash 40 1.0 40 0.55 0:35
Jeans 40 5.0 70 0.65 2:43
SuperSilent 60 6.0 55 0.78 4:00
AquaEco 40 2.5 19 0.43 1:00
Speed15´ 30 3.0 30 0.15 0:15
EcoCotton*** 60 6.0 55 0.90 3:30
CONSUMPTION DATA
Whirlpool is a registered trademark of Whirlpool USA.
Adddetergentasindicatedonthefrontpageandas
describedinthechapter“DetergentandAdditives”in
yourInstructionsforUse.
1. Turntheprogrammeselectortothedesired
programme.Thelightofthe“Start (Pause)”button
blinks.
2. Thetemperatureandspin speedindicatedonthe
displaycanbealteredbypressingthe“Temperature”
buttonorthe“Spin”button.
ConsumptionvaluesweremeasuredinnormalizedconditionsincompliancewithstandardIEC/EN60456.Consumptiondatainthehome
mayvarywithrespecttothevaluesinthetableinrelationtothewatersupplypressureandtemperature,theloadandthetypeofwash.
* Theremainingtimeindicatorcandeviatefromthevaluesinthetable,becauseittakesintoaccountthehouseholdconditions
applicableatthattime.
** Toreducethewatertemperature,somecoldwaterisaddedattheendofthemainwashcycle,beforethepumpdrainsthewaterout.
*** ReferenceProgrammeforEnergyLabel.
ADD DETERGENTS, CLOSE THE LID AND
SELECT THE PROGRAMME
“LID OPEN” INDICATION
Beforestartingandafterendofaprogramme,the
symbolappearsonthedisplaytoshowthatthelidcan
beopened.Aslongasawashprogrammeisrunning,
thelidremainslockedandmustonnoaccountbe
forcedopen.Incaseyouhaveanurgentneedtoopenit
duringarunningprogramme,referto“Resetarunning
programmebeforetheend”.
FAILURE INDICATIONS ON THE DISPLAY
Incaseofanyfailuresorirregularities,consultthe
“TroubleshootingGuide”inyourInstructionsforUse.
“Water tap closed”
Theappliancehasnoorinsufficientwatersupply.Open
thewatertap:iftheindicationsstilllightsup,refertothe
“TroubleshootingGuide”intheInstructionsforUse.
“Clean pump”
Wastewaterisnotpumpedout.Checkwhetherthe
drainhoseiskinkedorthefiltermustbecleaned;inthe
lattercaserefertotheInstructionsforUse(“Removing
theFilter”).
“Service”
Lightingupofthe“Service”indicationcanbecaused
byafaultinanelectricalcomponent.Refertothe
“TroubleshootingGuide”inyour“InstructionsforUse”;
ifthefaultpersists,contactourAfterSalesService.
“Rinse hold” button
• Thelaundryremainsinthelastrinsewaterwithout
progressingtothefinalspincycletoavoidcreasing
andpreventcoloursfromchanging.
• Itisparticularlyusefulifyouwanttopostpone
spinningtoalatertime,orifyouwanttodrainonly.
• Ifyouselect“Rinsehold”,donotleaveitemsto
soakfortoolong.
Note:Theprogrammestopsto“Rinsehold”atthe
timethe“Rinsehold”symbolonthedisplaylights
up.Thelightnexttothe“Start(Pause)”button
blinks.
Terminate the “Rinse Hold” option:
• Pressthe“Start(Pause)”button;theprogramme
willterminateautomaticallywiththefinalspincycle
forthepresentwashprogramme.
• Ifyoudonotwishtospintheclothes,pressandhold
the“Reset/Drain“buttonforafewsecondstostart
thedrainprogramme.
“Clean+” button
• Choosethisoptionifyouuseanin-washadditivefor
stainremoval(powder,forexample“Vanish”)-it
willoptimizetheadditive’sefficiencytogetbetter
washperformanceandstainremoval.
• Choosetemperatureof30or40°Candusewith
maximumload.
• Addanappropriateamountofin-washadditivefor
stainremoval(powder)tothemainwashchamber,
togetherwithyourdetergent(onlyusepowder
detergentwiththisoption).
Respectthemanufacturer’sdosinginstructions.
• Prolongstheprogrammebyapprox.10to15minutes.
• Appropriateforuseofstainremoversandbleaches
onoxygenbasis.Chlorine or perborate bleaches
must not be used!
PROGRAMME START
Openthetapandpressthe“Start(Pause)” button.
Theblinkinglightnexttothe“Start(Pause)”button
becomesconstant.Theprogrammesequenceindicator
showsthecurrentprogrammephase,runningfromleft
torightthroughWash,Rinse,Spin/Drain.
PROGRAMME END
• Thesymbolsoftheprogrammesequenceindicator
aredark,andthe“Dooropen”indicationlightsup.
1. Turntheprogrammeselectortothe“Off/O”position.
2. Closethewatertap.
3. Openlidanddrumandunloadthemachine.
4. Leavethelidopentoallowtheinsideofthemachine
todry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Pressthe“Start(Pause)” buttontopausethe
programme.Thelightblinks.
2. Selectthenewprogramme,temperature,any
optionsandanotherspinspeedifyouwant.
3. Pressthe“Start(Pause)” buttonagain.Thenew
programmecontinuesatthesamepositionwhere
thepreviousprogrammewasinterrupted.Donot
adddetergentforthisprogramme.
RESET A RUNNING PROGRAMME BEFORE THE
END
The“Reset/Drain”buttoncancelsaprogramme
beforetheend.
• Pressthe“Reset/Drain”buttonforatleast3
seconds.Thewaterisdrainedout;itmaylastawhile
untilyoucanopenthelid.
SELECT ANY DESIRED OPTION
START DELAY
The“StartDelay”allowstorunthemachineatthe
consumer’sconvenience,forexampleatnightwhen
electricityischeaper.Donotuseliquiddetergentwhen
activatingthe“StartDelay”.
• Selectprogramme,temperature,spinspeedandoptions.
• Pressthe“StartDelay”buttontoselectthedelay
timeupto23hours.
• Pressthe“Start(Pause)”button.
Thecountdownofthedelaytimebegins;theclock
symbolnexttothedelaytimeandthedotbetween
hoursandminutesblink.
• Thetimedelayindicationdisappearswhenthe
programmestartsanditisreplacedbytheremaining
programmetime.
• Oncehavingpressedthe“Start(Pause)”button,the
numberofhourspreselectedcanbereducedby
pressingandholdingthe“StartDelay”button.From
onehouron,thedelaytimecanalsobereducedin
stepsof10minutes.
To cancel the “Start Delay”
..before you press the “Start(Pause)” button:
• Selectanotherprogrammeorpressthe“Reset/Drain”
button.
..after having pressed the “Start(Pause)” button:
• Press“Start (Pause)“-thedelaytimedisappears
fromthedisplay;press“Start (Pause)“againto
starttheselectedprogrammeimmediately.
LOCK BUTTONS
Youcanlockthebuttonsofthecontrolpanelagainst
improperuse(e.g.bychildren).
• Pressthetemperatureandspinspeedbutton
simultaneouslyandholdthemforatleast3seconds.
Thekeysymbolonthedisplaylightsup.
• Tounlockthebuttonsagain:proceedinthesameway.
Whenthecombinationofprogrammeandadditional
option(s)isnotpossible,theindicationlightsswitchoff
automatically.Unsuitablecombinationsofoptionsare
deselectedautomatically.
“Prewash” button
• Onlyforheavilysoiledloads(forexamplesand,
granulardirt).Increasesthecycletimeby
approximately15min.
• Donotuseliquiddetergentforthemainwashwhen
activatingthePrewashoption.
“Eco” button
• Withmodifiedtemperatureprofileandaslightly
prolognedwashingduration,theoptimum
combinationofexcellentwashingresultandeven
lowerenergyconsumptionisachieved.
“Intensive rinse” button
• Morewaterisaddedandrinsecycleisprolonged.
• Thisoptionisparticularlysuitableforareaswithvery
softwater,washingbabylinenandhelpingpeople
withallergies.
SAVE YOUR FAVOURITE PROGRAMMES
Ifthereisaprogrammesettingwhichyouusefrequently,
theapplianceoffersthepossibilitytosaveonesetting
foreachprogrammesothatitcanbeusedagainbyjust
pushingonebutton.
• Selectthedesiredprogramme,temperature,spin
speedandoption(s),pushandholdthe“Favourites”
buttonforatleast3seconds.
Thelampnextto“Favourites”shortlyflashesand
thenlightsup-theprogrammesettingsissaved.
Nexttimeyouwanttouseyourindividualprogramme
settings,selecttheprogramme,pushthe“Favourites”
buttonandstartbypushing“Start(Pause)”.
If you want to replace the saved programme
setting by another one:
• Selectthedesiredprogramme,temperature,spin
speedandoption(s),pushandholdthe“Favourites”
buttonforatleast3seconds.
Thepreviouslysavedprogrammesettingwillbe
replacedbythenewone.
“ Spin” button
• Everyprogrammehasapredefinedspinspeed.
• Pressthebuttontosetanotherspinspeed.
• Ifspinspeed“0”isselected,thefinalspinningis
cancelledbutintermediatespinpeaksremainduring
therinse.Thewaterisdrainedoutonly.