2. Prescientx
  3. Aranet4 Wall Mount
Aranet4 Wall Mount

Prescientx Aranet4 Wall Mount Operating instructions

  • Hello! I've reviewed the provided Prescientx Aranet4 Wall Mount Instruction manual. This document details the steps for properly mounting your Aranet4 unit, including the use of the provided mounting clip, locking plate, and screw. I'm ready to answer any questions you may have about the installation process or any other information in the document.
  • What is the first step in mounting the Aranet4 unit?
    What is the purpose of the locking plate?
    What type of screw and screwdriver are needed for mounting?
900 Maple Grove Road, Unit 1-5, Cambridge, ON, Canada N3H 4R7 | www.prescientx.com
Page 1 of 2
Prescientx Aranet4 Wall Mount Instruction
1. Insert the white mounting clip at the back of the Aranet4 unit:
900 Maple Grove Road, Unit 1-5, Cambridge, ON, Canada N3H 4R7 | www.prescientx.com
Page 2 of 2
2. Insert the locking plate (the plate with Prescientx logo), make sure it is fit in between the Aranet4 unit and the
mounting clip lip, then line up the screw hole:
3. Mount the unit on the wall with the Tamper Resistant Torx Screw and T25 Security Torx Screwdriver Bit
(screwdriver handle not included) directly onto a stud or between studs using the drywall anchor supplied:
/