ENGLISH
Replacingtheairlterunit
JReplacement of the air
lter units
1) Remove the air lter units.
zTurnovertheprojectorandpull
outtheltercover(bottom);pull
upthehandleandtakeoutthe
lterunit(bottom.)
zPressupthelatchesandpull
outtheltercover(side);pull
outthehandleandtakeoutthe
lterunit(side).
2) Replace the air lter units.
zPutnewltersbackintothe
position.Makesurethatthe
ltersarefullyinsertedtothe
projector.
3) Resetting the Filter Counter
zBesuretoresettheFilter
counterafterreplacingthelter.
E-2
Filtercover(bottom)
Filtercover(side)
Latches(pressup)
Handle(pullout)
Handle(pullup)
JAir lter units
Filterpreventsdustfromaccumulatingontheopticalelementsinsidethe
projector.Shouldthelterbecomecloggedwithdustparticles,itwillreduce
coolingfans’eectivenessandmayresultininternalheatbuildupandadversely
aectthelifeoftheprojector.Ifa“Filterwarning”iconappearsonthescreen,
replacetheltersimmediately.