Vivo CART-E1TB User manual

Vivo
Brand
Vivo
Model
CART-E1TB
Type
User manual

Vivo CART-E1TB is an electric mobile overbed table that provides adjustable height and mobility for various tasks in healthcare, home office, or other settings. With a weight capacity of 44 lbs (20 kg), it can support laptops, books, meals, or medical equipment. The table features an easy-to-use control panel with up and down buttons for precise height adjustment. The reset procedure ensures smooth operation and prevents height drifting. Cable clips help manage cords, keeping the workspace tidy.

Vivo CART-E1TB is an electric mobile overbed table that provides adjustable height and mobility for various tasks in healthcare, home office, or other settings. With a weight capacity of 44 lbs (20 kg), it can support laptops, books, meals, or medical equipment. The table features an easy-to-use control panel with up and down buttons for precise height adjustment. The reset procedure ensures smooth operation and prevents height drifting. Cable clips help manage cords, keeping the workspace tidy.

Black Electric Mobile Overbed Table
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-e1tb
SKU: CART-E1TB
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
2
PACKAGE CONTENTS
WARNING!
A (x1)
Desktop
B (x1)
Base
C (x1)
Adjustable
Leg
D (x1)
Side Bracket
Set
G (x4)
Cable Clips
S-A (x5)
M6x35mm
Screw
S-B (x5)
M6x11mm
Screw
S-C (x9)
M5x12mm
Screw
T-A (x1)
5mm Allen
Wrench
NOTE: SOME HARDWARE MAY NOT BE USED DURING ASSEMBLY.
E (x1)
Control
Panel
F (x1)
AC Power
Adapter
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
44lbs
(20kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
TOOLS NEEDED
3
ASSEMBLY STEPS
STEP 1
STEP 2
Install Base (B) to the underside of Adjustable Leg (C) using M6x35mm Screws (S-A) and 5mm Allen
Wrench (T-A).
Install Side Bracket Set (D) to Adjustable Leg (C) using M6x11mm Screws (S-B) and 5mm Allen
Wrench (T-A).
T-A
NOTE: During installation, ensure that
Base (B) projects out over the Motor
Housing (C1) on the Adjustable Leg (C).
B
C1
C
S-A
T-A
D
S-B
CT-A
4
STEP 3
STEP 4
Install Desktop (A) to Side Bracket Set (D)
using M5x12mm Screws (S-C) and
a Phillips screwdriver.
The Control Panel (E) can be installed on any of the four corners of the Desktop (A). Select the
mounting location best for your use case and install Control Panel (E) to Desktop (A) using M5x12mm
Screws (S-C) and a Phillips screwdriver.
NOTE: Desktop (A) should
extend out over the Base (B).
S-C
A
D
B
S-C
E
A
5
STEP 5
STEP 6
Plug the Motor Cable (C1) from Adjustable Leg (C) and AC Power Adapter (F) into Control Panel (E).
Remove protective film from Cable Clips (G) and apply them to the underside of Desktop (A) to aid in
cable management.
Plug AC Power Adapter (F) into a compatible outlet and follow the operating instructions on next page
before use.
D
G
C1
F
F
A
E
6
CONTROL PANEL
Up Arrow:
Press and hold to li the desktop; release button to stop.
RESET PROCEDURE
Press and hold the until the desk lowers completely; continue hold for 5 seconds.
Release when desk rebounds 1cm. Reset is now complete.
If the reset needs to be halted for any reason, simply release the . Perform reset again.
Down Arrow:
Press and hold to lower the desktop; release button to stop.
7
LAST UPDATED: 06/02/2023
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Vivo CART-E1TB User manual

Vivo
Brand
Vivo
Model
CART-E1TB
Type
User manual

Vivo CART-E1TB is an electric mobile overbed table that provides adjustable height and mobility for various tasks in healthcare, home office, or other settings. With a weight capacity of 44 lbs (20 kg), it can support laptops, books, meals, or medical equipment. The table features an easy-to-use control panel with up and down buttons for precise height adjustment. The reset procedure ensures smooth operation and prevents height drifting. Cable clips help manage cords, keeping the workspace tidy.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents