VTech RM5754HD Baby Monitor User guide

Brand: VTech

Model: RM5754HD Baby Monitor

Category: Baby video monitors

Type: User guide

Baby Monitor Quick Set Up Guide

Connect and power on the baby monitor (For RM5754HD)

Applicable Models

RM5754HD, RM5764HD, RM7764HD, RM7767HD, VM901-1W

1. Connect Parent Unit to the adaptor and

mains supply. 2. Connect the respective Baby Unit to the

adaptor and mains supply. 3. Switch the Baby Unit on.

Connect and power on the baby monitor (For RM5764HD, RM7764HD)

1. Connect Parent Unit to the adaptor and

mains supply. 2. Connect the Baby Unit to the adaptor and

mains supply. 3. Switch the Baby Unit on.

Connect and power on the baby monitor (For RM7767HD)

1. Connect Parent Unit to the adaptor and

mains supply. 2. Connect the Baby Unit to the adaptor and

mains supply. 3. Switch the Baby Unit on.

Connect and power on the baby monitor (For VM901-1W)

1. Connect Parent Unit to the adaptor and

mains supply. 2. Connect the Baby Unit to the adaptor and

mains supply. 3. Switch the Baby Unit on.

Connect to a Wi-Fi network

Update the software (for early software versions)

Further help

1. Press key on your Parent Unit, and select

“Conﬁgure Wi-Fi” on the setting tab.

4. Check the status bar icons to make sure both

Parent Unit and Baby Unit connect to the router.

1. After connecting the system to your Wi-Fi

network, it will update in 4 hours. A pop-up

message will appear on the monitor when the

update is completed. Select “Now” and reboot

the system.

2. Now you can enjoy a more enhanced connection.

After updating, the connection is set to router

mode by default. Using router mode will allow you

to receive future software updates when available.

If these icons are displayed on the Parent Unit,

please place both the Parent Unit and Baby Unit

closer to the router, then power off and on the

Parent Unit and repeat Steps 1-3.

2. Select your Wi-Fi network.

3. Enter Wi-Fi password and select “Done”.

Update the software (for recent software versions)

1. Press key on your Parent Unit, and select

“Software Update” on the setting tab.

To see a video version of

this set-up guide scan here:

For setting up the full

range of your monitor’s

features scan here:

2. If there is new software available, the Parent Unit

will ask you to install it. Press ”Done” and the Parent

Unit will reboot for the update.

1
2

VTech RM5754HD Baby Monitor User guide

Brand: VTech

Model: RM5754HD Baby Monitor

Category: Baby video monitors

Type: User guide

Download PDF

Related papers

Other documents