2. Computers & electronics
  3. Audio & home theatre
  4. Computer TV tuners
  5. Nintendo
  6. Wii U
Wii U

Nintendo Wii U Quick Setup Manual

  • Hello! I am an AI chatbot trained to assist you with the Nintendo Wii U Quick Setup Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
IMPORTANT:
Through the use of your Wii console, you may accumulate Wii Points, Wii Shop
Channel downloads, saved game data, photos, messages, etc. that are saved in the
internal memory of your console. Some of this information may be personal and you
may want to retain or protect it. Review the Wii Operations Manuals and visit
www.nintendo.com.au or contact Nintendo Customer Service on:
Australia: (03) 9730 9822
New Zealand: 0800 743 056
Hours of Operation: 9:00am to 5:00pm Monday to Friday (Australian EST)
TM,
®
and the Wii logo are trademarks of Nintendo. ©2011 Nintendo.
For successful setup, the Wii system requires an initial installation of specialised
components, including the Sensor Bar, Wii Remote™ Plus, and Wii console. This
quick setup guide provides only brief instructions.
IMPORTANT: For detailed setup instructions of all components and important
health and safety information, please carefully read the Wii Operations Manual
System Setup.
NOTE: Page numbers mentioned in this quick setup guide refer to the Wii
Operations Manual System Setup.
Wii QUICK SETUP
5
Place the Wii console on a flat horizontal surface. Insert your Game Disc into the Game Disc
slot on the front of the console. The Wii console will turn ON automatically. See Pg. 21.
5
Playing a Wii Game Disc
MKA-RVK-S-AUS-C0
Video Left - Audio - Right
230V-240V
Remove Remove
Set the correct “Input Select” setting for your TV, VCR or other equipment.
See Pg. 10 & 15.
Installing the Sensor Bar
Plug the Wii AC adapter into a standard 230-240 volt household electrical
outlet after installing the Sensor Bar on the TV. See Pg. 14.
1
Wii AC Adapter
2
TV video/audio input
3
Synchronising Wii Remotes
4
Remove the paper from the double stick
tape on the bottom of the Sensor Bar.
Install on your TV. See Pgs. 11-14.
Any additional Wii Remote or Wii Remote Plus controllers you use with your
console will first need to be synchronised. Press the POWER button to turn on
the Wii console, then press the SYNC. buttons simultaneously as shown. The
included Wii Remote Plus should already be synchronised to your Wii console.
See Pgs 19-20.
Remove
the battery cover
Press and release
Open cover
2
Sensor Bar (RVL-014)
3
TV Inputs
1
Wii Console
(RVL-101(AUS))
Wii AV Cable (RVL-009)
Wii AC Adapter
(RVL-002(AUS))
4
/