Nintendo Wii U Operating instructions
- Category
- Touch screen monitors
- Type
- Operating instructions
Wii U
Operations Manual
MAB-W UP-S-UKV-C2
3
Wii U Documentation
................ 4
Types of Documentation ................. 4
Using Electronic Manuals ................ 4
Important Health and Safety
Information (Please read)
............ 5
Getting Started ........... 7
Component Names and Functions ... 7
Wii U Console ........................... 7
Wii U GamePad .......................... 8
Charging the Wii U GamePad ........ 11
How to Charge .......................... 11
Reading the Battery LED ................. 12
Turning the Power On / O ........... 13
Turning the Power On ................... 13
Turning the Power O ................... 14
Turning the Wii U GamePad
Screen O ............................... 14
Pairing Controllers .................. 15
Pairing Wii Remotes and
Other Controllers ........................ 15
Pairing a Wii U GamePad ................. 15
Positioning the Sensor Bar ........... 16
How to Position the Sensor Bar ........... 16
Play Environment ........................ 17
Settings ................. 18
System Settings ..................... 18
Conguring Settings ..................... 18
User Settings ........................ 19
Adding Users ............................ 19
Changing Users .......................... 19
How-To .................. 20
Transferring Software and Data ...... 20
Transferable Data ........................ 20
Preparing for the Transfer ................ 21
Transfer Procedure ....................... 21
Entering Text ........................ 24
Screen Layout ........................... 24
Available Keyboards ..................... 24
Calibrating Controllers .............. 25
Calibrating the Touch Screen ............. 25
Calibrating the Control Sticks ............ 25
Calibrating the Motion Controls .......... 25
Replacing and Removing Batteries ... 26
Wii U GamePad Battery .................. 26
Handling Used Batteries .................. 28
Wii U Console Battery .................... 29
Handling Used Lithium
Coin Cell Batteries ....................... 29
Troubleshooting ......... 30
Power and Temperature of Devices ....... 30
Charging and Batteries ................... 32
TV Display and Audio .................... 33
Wii U GamePad Display and
Touch Screen Response .................. 33
Controller Operations .................... 35
Requesting Repairs ...................... 36
This seal is your assurance that Nintendo has reviewed this product and
that it has met our standards for excellence in workmanship, reliability and
entertainment value. Always look for this seal when buying games and
accessories to ensure complete compatibility with your Nintendo Product.
Thank you for selecting the Wii U™ console.
[0712/UKV/WUP-HW]
Trademarks are property of their respective owners.
Wii U is a trademark of Nintendo.
© 2012 Nintendo Co., Ltd.
Please note that Nintendo may amend or update product manuals and other important documents from time to time. Nintendo therefore recommends checking for the latest
version of the manuals you may be referred to at http://docs.nintendo-europe.com/. Please note this service may not be available in some countries.
IMPORTANT: Nintendo may automatically update your Wii U console or Wii U software to ensure the security and proper functioning of your Wii U console, to improve the service or
to protect the intellectual property of Nintendo or third parties.
This product contains technological protection measures. Your Wii U console is not designed for use with any existing or future unauthorised device or software that enables technical
modication of the Wii U console or software.
Any such unauthorised use may render your Wii U console permanently unplayable and result in removal of content.
Any software included in the Wii U console as well as any updates of such software (together “the Software”) are licensed by Nintendo only for personal and non-commercial use on
the Wii U console. The Software must not be used for any other purpose. In particular, without Nintendo’s written consent, you must neither lease or rent the Software nor sublicense,
publish, copy, modify, adapt, translate, reverse engineer, decompile or disassemble any portion of the Software other than as expressly permitted by applicable law.
For use with the European/Australian version of Wii U and Wii software only.
Contents
IMPORTANT: Please read this Operations Manual and accompanying Important Information booklet before use, paying careful attention to the health and safety information in
both documents. Please also make sure you read the health and safety information in the Health and Safety Information application on the Wii U Menu once the console has been
set up. If this product is to be used by young children, the documentation should be read and explained to them by an adult. Store all documentation in a safe place.
Parental Controls
You can restrict the ways in which children use the Wii U console, for example by restricting the use of software, purchases in Nintendo eShop, viewing of websites and other features.
During initial setup of the console, you will be asked to congure Parental Controls. Follow the on-screen instructions to set specic restrictions. To view or change Parental Controls
settings after the initial setup has been completed, select Parental Controls from the Wii U Menu.
The Parental Controls settings are protected by a PIN code that you are prompted to choose the rst time you congure Parental Controls.
For more information, please see the
Quick Start Guide.
4 5
To prevent damage to your health, and accidents caused by re
or electric shock etc., make sure you read the contents of the
Health and Safety Information application on the Wii U Menu
and the
Important Information booklet packaged with
the console, and use the console as instructed.
Use of this product by children
Read the contents of the Health and Safety Information application on the Wii U Menu and the Important
Information booklet as well as any instruction manuals before use, and accompany your child or children
during their use of the console.
Perform regular checks
Perform regular checks of the console and its parts, for example making sure that the AC adapter cord or
plug is not damaged, that dust has not gathered between the AC adapter plug and socket outlet, that dust
has not collected in the air intake and air vents of the console, and so on.
If the system doesn’t operate properly
Review the Troubleshooting chapter of the manual (p. 30).
If a problem occurs
(If you notice any damage to the console, smoke or unusual sounds or smells etc.)
Turn o
Hold down the POWER Button for at least one second.
· You should touch only the POWER Button. Do not touch any other
part of the console.
Unplug
Unplug the AC adapter from the wall socket.
· Disconnect any connected peripherals as well.
Contact
Contact Nintendo Customer Support (see Important
Information booklet).
· Do not attempt to repair the console yourself. To do so could cause
injury.
Important Health and Safety Information (Please read)
Manuals packaged with the console
Quick Start Guide
Provides information on getting ready to use the Wii U™ console for the rst time.
Wii U Operations Manual (this manual)
Provides information on topics such as part names, recharging, System Settings options and
troubleshooting.
Important Information booklet
Contains important information regarding health and safety, warranties, support information,
disposal of the product and so on.
Manuals built in to the Wii U console
Wii U Electronic Manual
Includes detailed explanations on how to use Wii U features and pre-installed software.
Wii Menu Electronic Manual
Includes detailed explanations on how to use Wii Menu features and pre-installed software.
· In order to reduce the use of paper, we are moving our documentation to electronic formats.
Press the HOME Button on the Wii U GamePad while the Wii U Menu is displayed to open the HOME Menu,
then touch
. The Wii U Electronic Manual will appear.
· If you press the HOME Button while using a Wii U software title, touching will display the electronic manual
for that software instead.
· To close the manual, touch in the bottom left of the screen. The console will return to the screen it was
displaying before you pressed the HOME Button.
Electronic manual contentsHOME Menu
Touch or slide on the screen using the Wii U GamePad stylus (p. 9) to view the contents of the manual.
·
Change pageSelect items View page
Note that the screens and illustrations shown were taken during development and may dier from those found in
the nal product.
· To change the language of the electronic manual, select the option shown in the bottom-right corner of the screen.
Types of Documentation
Using Electronic Manuals
Wii U Documentation
76
AC Adapter Warnings
Incorrect usage of the AC adapter could lead to re, electric shock, overheating or damage to
the AC adapter.
z The AC adapter should be plugged into a nearby, easily accessible socket.
z Do not use or place the AC adapter in hot places or places where heat can accumulate, such as:
• places that receive direct sunlight, or near sources of heat such as stoves and heaters
• on electric blankets or carpets with long bres
• on top of AV equipment
• outdoors or in hot cars
z Do not use the AC adapter in places which have high humidity or where water might leak.
Additionally, do not handle it with dirty or greasy hands.
z Do not place any items containing liquids such as vases on top of the AC adapter.
z Ensure that the AC plug is fully inserted into the wall socket.
z Be sure to connect the AC adapter to the correct voltage (230V).
z Do not apply force to the cord, for example by twisting or coiling the cord tightly, or by placing
heavy objects on the cord (particularly at the base of the cord).
z Do not step on the cord, pull on the cord, wind up the cord or perform technical modications of
the cord.
z Regularly remove any build-up of dirt such as dust from the AC plug by removing it from the wall
socket and wiping it with a dry cloth.
z Do not use an AC adapter that has become wet, for example with pet urine.
z The use of these products by children should only be allowed with the full supervision of a parent
or legal guardian.
AC adapter rating information is located on the bottom of the unit.
Component Names and Functions
Wii U Console
Front View
(Slot cover opened)
· View from the right
Rear View
· Please note that the illustrations published in this manual may dier from the nal product.
POWER Button
Press to turn the Wii U console on and o.
Power LED
Shows you the status of the console.
(blue): Power is on (p. 13).
(orange): Console is downloading/
installing data while power is o (p. 14).
(red): Power is o (p. 13).
EJECT Button
Press to eject a disc.
Disc LED
Lights up white when a disc is inserted.
Disc slot
Used to insert Wii U discs or Wii Game Discs.
SYNC Button
Press to pair controllers such as the
Wii U GamePad or separately-sold
Wii Remote™ / Wii Remote Plus (p. 15).
SD Card slot
Used to insert separately-sold SD Cards
(see
Wii U Electronic Manual, “Using
SD Cards”).
USB ports
Used to connect separately-sold USB devices
marked with
(see Wii U Electronic
Manual, “Using USB Devices”).
Battery cover
Covers the compartment containing the
lithium coin cell battery (CR2032).
· Do not remove this cover except when
replacing the lithium coin cell battery.
Air intake
AC adapter connector
AV Multi Out connector
Sensor bar connector
HDMI™ port
Air vent
Component Names and Functions
8 9
Component Names and Functions
Component Names and Functions
Wii U GamePad
Front View
Left Stick (L Stick)
· The Left Stick can be pressed and used like
a button.
Control Pad
Sensor bar
Detects movement of Wii Remotes when the
Wii Remote is used to control the screen on
the Wii U GamePad. (Supported software only.)
· When used in this way, this component functions
in eectively the same manner as the Sensor Bar
(RVL-014) which is included as part of the
Premium Pack.
· When using Wii Remotes to control software on
the TV screen, you will need a separately-sold
Sensor Bar (p. 16).
Camera
A, B, X and Y Buttons
Right Stick (R Stick)
· The Right Stick can be pressed and used like
a button.
+ Button
– Button
Speakers
POWER Button
Press to turn the Wii U console and
Wii U GamePad on and o (p. 13).
TV Button
Perform TV, digital video recorder and TV tuner
(e.g. cable television, satellite television)
controls (p. 13).
Battery LED
Lights up when charging and indicates battery
level (p. 12).
HOME Button
Press to congure settings for controllers
such as the Wii U GamePad or Wii Remote,
or to view the HOME Menu, where you can
access features such as electronic manuals
(see
Wii U Electronic Manual, “HOME Menu”).
· The HOME Button LED will light up blue when
someone on your friend list comes online (see
Wii U Electronic Manual, “Friend List”), or
when you receive a call via the built-in Wii U Chat
software, among other events.
Microphone
Touch screen
NFC touchpoint
Finds and reads data from items such as cards
which support NFC (near-eld communication).
(Supported software only.)
Touch Screen Controls
Touch
Gently pressing the touch screen with the
stylus is called “touching” (or “tapping”).
· If the touch screen does not respond properly, please refer to the “Touch screen cannot be used (no response
from touch screen)” part of the Troubleshooting section (p. 34).
Slide
Tracing over the touch screen with the stylus
held gently against it is called “sliding”.
Standing the Wii U GamePad Up
Place the Wii U GamePad in a Wii U GamePad Stand or Wii U GamePad
Cradle on a at, stable surface (e.g. a tabletop).
· Do not place the Wii U GamePad on its side.
· Do not use the touch screen, buttons and so on when standing the
Wii U GamePad up in a stand or cradle.
· The Wii U GamePad Stand and Wii U GamePad Cradle are included in the
Premium Pack only.
10 11
Component Names and Functions
Top View
Rear View
Bottom View
L Button / ZL Button
R Button / ZR Button
Stylus holder
Stores the Wii U GamePad stylus.
Volume control
Slide left and right to adjust the volume
of the Wii U GamePad.
Infrared transceiver
Exchanges information using infrared
communication.
Audio jack
Plug commercially-available headphones in
here. When using headphones, ensure that
you plug them in rst before wearing them.
· When headphones are plugged in, the speakers
will be muted.
AC adapter connector
Connects to the Wii U GamePad AC Adapter.
Support
Hand grips
Battery cover
The Wii U GamePad Battery is stored here.
· Do not remove the battery cover except
when replacing the battery.
SYNC Button
Press to pair the Wii U GamePad with a
Wii U console (p. 15).
Charging terminals
Connect to the charging terminals on the
cradle.
Accessory connector
Connects to accessories for use with the
Wii U GamePad.
Charging the Wii U GamePad
Charging the Wii U GamePad
The battery LED will turn orange while the Wii U GamePad
is charging, and will turn o when charging has nished. The
battery LED may not go out if you charge the Wii U GamePad
while it is in use.
· Charge only in places where the temperature is between
10 and 35°C.
· Charge the Wii U GamePad if it is being used for the rst time or
if it has not been used for a long time.
Connect the Wii U GamePad AC Adapter as shown in the diagrams below to charge the Wii U GamePad.
Make sure to insert the plug the right way up, and ensure that the plug is rmly inserted.
· The illustrations below show the UK version of the AC adapter.
Directly Connecting the AC Adapter
Remove the AC plug from the wall socket after charging has completed, then carefully remove the plug
from the Wii U GamePad, holding both the plug and the Wii U GamePad.
Using the Wii U GamePad Cradle
Place the cradle on a stable surface. If you have a commercially-available cover on your Wii U GamePad,
remove it before charging.
· The cradle is only included as part of the Premium Pack.
How to Charge
12 13
Turning the Power On / O
Charging the Wii U GamePad
Charging Time and Battery Life
· All times are intended as a rough guide.
z Charging time: approx. 2.5 hours
Charging time may dier depending on factors such as usage environment and remaining battery
level.
z Battery life: approx. 3 – 5 hours
Time may dier depending on factors such as screen brightness, features in use (e.g. camera or
microphone), use of wireless communication and ambient temperature.
· The Wii U GamePad comes with the screen brightness set to 4. You can change the brightness of the
screen in Controller Settings on the HOME Menu.
Power-Saving Mode
The Wii U GamePad can automatically adjust the brightness and contrast of the screen based on the
images displayed in order to reduce battery consumption. To use the power-saving mode, enable it
from the Wii U GamePad section of Controller Settings on the HOME Menu.
The behaviour of the battery LED changes depending on the remaining battery level.
· If the battery becomes depleted while playing a game, you will not be able to use the Wii U GamePad.
Charge the Wii U GamePad when the battery LED turns red.
High
Low
Very low
Remaining battery level
Battery LED
(Red)(O ) (Flashing red)
Reading the Battery LED
Turning the Power On / O
You can turn the power on / o using the Wii U console or controllers such as the Wii U GamePad.
There are a number of ways to turn the power on, including those given below. After turning the power on
and selecting a user, the Wii U Menu will appear.
· You can start the Wii Menu directly. After turning the power on, press the B Button on the Wii U GamePad while
the Wii U logo is displayed in the middle of the screen (see Wii U Electronic Manual, “Wii Menu”).
Using the POWER Button on the Wii U GamePad ( )
Press the POWER Button on the Wii U GamePad to turn the
power on and activate the Wii U GamePad screen display.
· The POWER Button on other controllers, such as the Wii Remote,
can also be used to turn the Wii U console on.
· The controller must be paired with the Wii U console
beforehand
(p. 15).
Using the Wii U GamePad TV Button ( )
Press on the Wii U GamePad to display the screen for the TV Remote feature. Touch PLAY Wii U.
· The TV Remote feature also allows you to control the TV using the Wii U GamePad, for example by turning on
the TV or changing the input (see Wii U Electronic Manual, “TV Remote”).
Using the Wii U Console POWER Button ( )
Press the POWER Button on the Wii U console to turn on the
power and activate the Wii U GamePad screen display.
User-Selection Screen
The Wii U Menu will be displayed
after you turn on the power and
select a user (p. 19).
Turning the Power On
14 15
Pairing Controllers
Turning the Power On / O
Press and hold the POWER Button on the Wii U console or a controller for at least one second. When the
power has been turned o, the Wii U console’s power LED will turn from blue to red, and the Wii U GamePad
screen will turn o.
· The power LED will remain on even if the power is turned o.
· The Wii U console cannot be turned o with the Wii U GamePad when using the Wii Menu or Wii Game Discs.
Warning: Turning the Power Back On
Do not immediately turn the power back on after turning it o. Doing so could damage the console.
Once the power LED has turned red, always wait at least four seconds before turning the power
back on.
Auto Power-Down Feature
The Auto Power-Down feature powers down the console if there has been no user interaction with
the console for a certain period of time. You can reset the desired period of time before the console
powers down under Auto Power-Down, accessible from Power Settings in System Settings on the
Wii U Menu.
· The console comes precongured to automatically power down after one hour of no user interaction.
Standby Functions
This feature allows the console to automatically download and install data even after it has been
turned o. If Standby Functions are enabled, the power LED will turn from red to orange shortly
after the console is turned o. If software on the console needs updating or installing, the required
data will be downloaded and installed. Once all data has been downloaded and installed, the
power LED will turn back to red.
· This setting is disabled by default. (You can change it under Power Settings in System Settings on the
Wii U Menu.)
· The power consumption while the console is o is as follows:
•WhenStandbyFunctionsaredisabledandthepowerLEDisred:lessthan0.5W
•WhenStandbyFunctionsareenabledandthepowerLEDisorange:morethan0.5W
The screen of the Wii U GamePad can be turned o to reduce battery consumption if not in use. To turn o
the screen, select DISPLAY OFF from under Controller Settings on the HOME Menu.
· When the screen is turned o, the battery LED will slowly turn o.
Turning the Power O
Turning the Wii U GamePad Screen O
Pairing Controllers
Controllers, such as the separately-sold Wii Remote, must be paired with the Wii U console before use.
Once a controller has been paired, you can use the POWER Button on that controller to turn the Wii U console
on and o.
· A Sensor Bar (p. 16) is required in order to use Wii Remotes (except for certain software titles).
· If you pair a controller with one Wii U console and then wish to use it with another console, you must pair the
controller with that console rst. The same applies if you wish to use a Wii-compatible controller with a Wii™ console
once it is paired with the Wii U console.
· To pair a Wii Balance Board™, refer to the manual for the software that supports it.
To pair controllers such as Wii Remotes, press the SYNC Button
on the Wii U console (once) while the Wii U Menu is displayed.
You can then pair controllers by following the instructions on
the TV screen and pressing the SYNC Button on the controller.
· You can pair up to a total of ten controllers (this number does
not include the Wii U GamePad). Once you exceed this limit,
existing controller pairings will be deleted, starting from the
oldest pairing.
Once pairing has completed, a Player LED on the controller
will light up. The Player LED that lights up indicates the
player number assigned to that controller.
P1 P2 P3 P4
Example: Wii Remotes
To pair a Wii U GamePad, press the SYNC Button on the
Wii U console twice while the Wii U Menu is displayed.
Next, press the SYNC Button on the Wii U GamePad and
pair it by entering the symbols shown on the TV screen,
following the on-screen explanation.
Pairing Wii Remotes and Other Controllers
Pairing a Wii U GamePad
16 17
Positioning the Sensor Bar
Positioning the Sensor Bar
Positioning the Sensor Bar
Before using Wii Remotes, you must position a Sensor Bar (RVL-014) following the steps below. A Sensor Bar is
included as part of the Premium Pack. (Please note that Wii Remotes and the Sensor Bar are not compatible
with some software.)
Connect the Sensor Bar to the
Wii U console
Plug it into the sensor bar connector at the rear
of the Wii U console. Ensure that the plug is rmly
inserted. If you purchased the Basic Pack, you can use
a Sensor Bar from a Wii console set you already own.
Remove the protective lm from the
bottom of the Sensor Bar
Place the Sensor Bar either above or below the television screen
Before placing the Sensor Bar, read the “Sensor Bar Placement Tips” section (p. 17).
If You Place the Sensor Bar Below the TV Screen
Start System Settings from the Wii U Menu, select Wii REMOTE AND SENSOR BAR, then select
SET SENSOR BAR POSITION and nally select BELOW TV to specify the position of your Sensor Bar.
How to Position the Sensor Bar
Sensor Bar Placement Tips
The Sensor Bar should be in
a central position and facing
straight ahead.
· Do not mount the Sensor Bar on the TV’s
ventilation.
Place the Sensor Bar as far forwards
(so that it is slightly in front of the
TV) and as level as possible.
If placing the Sensor Bar on a TV
stand, place it as near to the screen
as possible.
Use the Wii Remote in an environment that meets the following conditions:
z you should be able to see the Sensor Bar straight in front
of you
z there should be no obstacles between the Sensor Bar and
the Wii Remote
z you should be standing or sitting in front of the television
z you should be 1– 3m away from the Sensor Bar
If you are having diculty using the Wii Remote, adjust its
settings by starting System Settings from the Wii U Menu and
then selecting Wii REMOTE AND SENSOR BAR, or consult the
“Wii Remote cannot be operated (does not respond correctly)”
section of the Troubleshooting chapter
(p. 35).
Play Environment
18 19
In System Settings, you can congure Wii U console settings
such as internet connections or data management, and view
information such as the system version of the Wii U console.
· These settings are shared across all users. You cannot congure
settings for individual users (p. 19).
Congure settings by touching the Wii U GamePad screen. For information about the available options
and the items you can congure, see Wii U Electronic Manual, “System Settings”.
Setting category
Select to congure individual items.
List of available settings for each category
System version
List of setting categories
Touch an icon to jump directly to the
corresponding category.
Explanations of Settings
Explanations will appear on the TV screen while you are conguring
settings. To scroll through the explanation on the TV screen, use the
Right Stick on the Wii U GamePad.
Configuring Settings
User Settings
System Settings
System Settings
On the Wii U console, game save data, play time and other such items can be managed or saved for
individual users. If the console will be used by several people, for example a family, then you should rst
add users for each person who will use the console.
In order to use online services or features, you must congure an internet connection and link a Nintendo
Network ID (see
Wii U Electronic Manual, “User Settings”).
· More information will be displayed on the TV screen when you congure these settings.
A Nintendo Network ID is necessary to use Nintendo Network™ services and features. Each user
must link a Nintendo Network ID in order to use Miiverse™ and Nintendo eShop, and manage friend
information.
· A Nintendo Network ID is dierent from a Club Nintendo account.
· An email address is required to create a Nintendo Network ID.
· A parent or legal guardian should create a Nintendo Network ID for children.
The parent or legal guardian’s email address must be used.
Touch NEW USER on the user-selection screen that appears
after turning the power to the console on, then follow the
on-screen instructions.
· Up to 12 users can be added to one Wii U console.
· You can also add users by touching the Mii™ that appears at the
top left of the Wii U Menu.
Touch the Mii that appears at the top left of the Wii U Menu to display the user-selection screen. To select
a new user, touch the Mii for that user.
· Touch USER SETTINGS to edit a user’s Mii, change user information, delete users and so on.
Adding Users
Changing Users
User Settings
20 21
Transferring Software and Data
Data saved on a Wii console, such as software and save data,
can be transferred (moved) to a Wii U console.
· Data will be deleted from the Wii console once transferred.
· You cannot transfer data from a Wii U console to a Wii console.
Once data has been transferred to a Wii U console, it cannot be
returned to a Wii console.
You will need the following to perform a transfer:
z Wii U console pack and Wii console pack
z separately-sold SD / SDHC Memory Card (with at least 512MB of free space)
(hereafter referred to as “SD Card”)
z broadband internet environment (see Quick Start Guide, “Internet Settings”)
· For more information about connecting a Wii console to the internet, refer to the Wii Operations Manual –
Channels & Settings.
The data listed below will be transferred as a set. You cannot select individual items to transfer, nor can you
transfer any other kinds of data, such as save data for Nintendo GameCube™ software.
Wii Software
z Save data for Wii software
1
z WiiWare™ and save data
1, 2
z Virtual Console™ titles and save data
1, 2
z Add-on content for software
Wii Shop Channel
z Wii Points
3
z Wii Shop Channel account activity
Other z Mii characters
4
1
If the save data has been moved to an SD Card, please move it back to the Wii console before starting the transfer.
2
Any software that came pre-installed on your Wii console cannot be transferred.
3
The Wii Points balance will be added to the Wii U console’s Wii Shop Channel balance. You cannot perform
a transfer if the total balance would exceed 10,000 Wii Points.
4
The Mii characters will be moved to the Mii Channel on the Wii U console’s Wii Menu.
Transferable Data
Software on the Wii console that has been deleted or moved to an SD Card
The Wii Shop Channel account activity will be moved to the Wii Shop Channel on the Wii Menu of the
Wii U console. If you have deleted any software acquired through the Wii Shop Channel or moved it
to an SD Card, please redownload it (free of charge) from the Wii Shop Channel on the Wii U console.
Transferring Software and Data
Transferring Software and Data
Connection Check
Check the connection between the Wii U console, the Wii console and the Sensor Bar, and check each
console’s internet connectivity.
Wii console Wii U console
Sensor Bar
Wii AV cable etc HDMI cable etc
Example: A connected TV.
Linking a Nintendo Network ID
You must link a Nintendo Network ID (p. 19) before transferring
data. You can check whether one has been linked by the Mii icon
in the upper left corner of the Wii U Menu screen.
: If the background of the Mii icon is blue, then a Nintendo
Network ID has been linked and you can continue with
the transfer procedure.
: If the background of the Mii icon is grey, then a Nintendo
Network ID has not yet been linked. Touch the user Mii
and link a Nintendo Network ID (see Wii U Electronic
Manual, “User Settings”).
When both consoles are connected to the TV, change the TV’s input to operate the Wii U and Wii in turn.
· If you are alternately connecting the Wii and Wii U consoles to the TV using one AV cable, switch the AV cable
between consoles when swapping the SD Card.
· Do not remove the SD Card, turn either of the consoles o or disconnect AC adapters while data is being saved
or loaded. Doing so could cause damage to the devices and/or data loss.
Select the Wii Menu icon from the
Wii U Menu.
Preparing for the Transfer
Transfer Procedure
22 23
Select Wii SYSTEM TRANSFER.
Wii System Transfer must be downloaded (free of
charge) from the Wii Shop Channel. Its icon should
appear in the Wii Menu.
• Select the system memory as the save destination.
Select the newly-appeared
Wii SYSTEM TRANSFER.
Insert the SD Card to be used for the
transfer into the Wii U console.
Read the warnings on the screen and follow the
on-screen guide as you perform the transfer.
Information about the Wii U console will be saved
to the SD Card.
Change the TV input from the Wii U console to the Wii console.
If you only have one Wii Remote to operate both consoles, then it must be paired with the
Wii console (see
Wii Operations Manual – System Setup).
Download the Wii U Transfer Tool from
the Wii Shop Channel on the Wii console.
Select START SHOPPING to download the Wii U
Transfer Tool under Wii CHANNELS, free of charge.
• Select the Wii System Memory as the save destination.
Select Wii U TRANSFER TOOL from
the Wii Menu.
Remove the SD Card from the
Wii U console and insert it into the
Wii console.
Read the warnings on the screen and follow the
on-screen guide as you perform the transfer. Data
from the Wii console will be saved to the SD Card.
• Only data saved to the Wii System Memory will be transferred to the SD Card.
Change the TV input from the Wii console to the Wii U console.
If you only have one Wii Remote to operate both consoles, then it must be paired with the
Wii U console
(p. 15).
Remove the SD Card from the
Wii console and insert it into the
Wii U console.
Follow the on-screen instructions to transfer the
Wii console data (saved to the SD Card) to the
Wii U console.
Once the transfer has completed, the data will be deleted from the SD Card.
Transferring Software and Data
Transferring Software and Data
24 25
Calibrating Controllers
Entering Text
Use the keyboard that appears on the screen when you need to enter text.
Use the on-screen keys to enter text.
Text you have entered will appear here.
Open the keyboard menu to change the word
prediction language or switch to one of the
additional keyboards (see below).
Predicted words will appear here as you
type them. Select
to cycle through
candidates.
Start a new line.
Confirm text entry.
Space bar
Touch keys to enter characters.
Shift / Caps lock
Delete the character to the left of the cursor.
Switch between sections of the main keyboard
(alphabet / punctuation, numbers / some special
characters, common punctuation / symbols).
There are three main text entry methods to choose from. You can also set the language used for word
prediction.
· The available methods may dier depending on the software in use.
Main keyboard This is the normal keyboard used for text entry. The word-prediction feature will use
the dictionary for the language you have selected. Dictionaries for English, French,
Spanish, German, Italian, Dutch, Portuguese and Russian are available. To switch to
this keyboard from the Symbols or Special keyboards, select ENG, FRA, ESP, DEU, ITA,
NED, POR or РУС from the keyboard menu.
Symbols Switch to the symbol-only keyboard.
Special Switch to a special-characters-only keyboard, featuring accented characters and
characters used in languages such as Greek or Russian.
· The layout of the normal keyboard is based on the language setting of the console. For example, if the console
language is set to English, a British English QWERTY keyboard layout will be used, while if the language is set to
French, a French AZERTY keyboard layout will be used.
Screen Layout
Available Keyboards
Entering Text
If the touch screen of the Wii U GamePad does not respond correctly, or if the control sticks of controllers in
general do not respond correctly, follow the instructions here in order to perform calibration.
Calibrate the touch screen using the Wii U GamePad option in System Settings on the Wii U Menu.
If you are unable to operate the Wii U Menu using touch controls, you can use the
Control Pad and the
A Button instead.
The Left Stick and Right Stick of the Wii U GamePad are analogue control sticks. The angle and direction
of these control sticks are read by the controllers to allow you to perform precision controls. When the
control sticks are not tilted in any direction, their status is referred to as the “neutral position”.
If the control sticks are tilted in any direction when
performing the operations listed below, they will
be misrecognised as being in the neutral position,
causing them to function incorrectly:
z Turning the power to the console on
z Starting software
z Closing software and returning to the Wii U Menu
Calibration (Resetting the Neutral Position)
To reset the neutral position, stop touching the control sticks, then press and hold the A, B, + and – Buttons
for at least three seconds.
If the screen moves during play even though you are not operating the Wii U GamePad, or the movement
of the screen does not match the movement of the Wii U GamePad correctly, then go to the HOME Menu
and hold the Y Button and the B Button for at least three seconds. When the calibration screen is displayed,
place the Wii U GamePad on a at surface, and select CALIBRATE or REVERT TO DEFAULTS.
· After selecting CALIBRATE, please make sure the Wii U GamePad is placed on a at surface.
Calibrating the Touch Screen
Calibrating the Control Sticks
Example: Wii U GamePad Left Stick
Calibrating the Motion Controls
Calibrating Controllers
26 27
Replacing and Removing Batteries
Replacing and Removing Batteries
You should replace the Wii U GamePad Battery if the controller can only be used for extremely short periods
of time.
Additionally, you should replace or remove the lithium coin cell battery in the console itself if the internal
clock does not function correctly or if you intend to dispose of the console.
· The replacement or removal of batteries should only be carried out by an adult.
· The capacity of the battery in the Wii U GamePad will gradually decrease over time with repeated recharging.
After 500 charges, the battery capacity will be at 70%.
Hold the POWER Button ( ) for at
least one second to turn the power o
If the AC adapter is connected to the Wii U GamePad,
ensure that you disconnect it as well.
Loosen the battery cover screws
There are two screws. They are designed not to fall
out from the battery cover once loosened.
• To avoid damaging the heads of the screws, use a
size 0 cross-head screwdriver.
Remove the battery cover
Lift up the edge of the battery cover, then pull it out.
Wii U GamePad Battery
Replacing and Removing Batteries
Remove the old battery
Unplug the battery from the terminal as shown in the diagrams below.
• Never disconnect the battery from the terminal by pulling on the cable.
• Please dispose of the battery properly after removal (p. 28).
Wait for at least ten seconds, then install the new battery
Make sure the battery is the right way up, then install it as shown in the diagrams below.
• If you insert the new battery without waiting, the battery LED may stop lighting up or ashing.
Replace the battery cover
Put the battery cover back into position and tighten the two screws.
• Always replace the battery cover. If the battery cover is not put back into position, any shock to the
battery may cause damage to the battery, re or rupture of the battery.
• To avoid damaging the heads of the screws, use a size 0 cross-head screwdriver.
28 29
Replacing and Removing Batteries
Ensure that the disc LED is not lit
If the disc LED is lit, press the EJECT Button and remove the disc.
Turn o the console and disconnect the AC adapter
Ensure that the power LED is red, then unplug the Wii U AC Adapter from the socket outlet.
Turn over the console and remove the battery cover
The battery cover screw is designed not to fall out once loosened.
• To avoid damaging the head of the screw, use a size 0 cross-head screwdriver.
Remove the battery, install the new
battery and replace the battery cover
After removing the battery, place the new lithium
coin cell battery (CR2032) with the positive (+) side
facing up, then replace the battery cover.
• To avoid damaging the head of the screw, use a
size 0 cross-head screwdriver.
Wii U Console Battery
Handling Used Lithium Coin Cell Batteries
z Insulate the positive (+) and negative (–) sides using tape to prevent
shorting by metallic objects.
z Do not disassemble the battery.
z Discarding batteries in your general household waste can be
harmful to the environment. When disposing of the battery, follow
appropriate local guidelines and regulations.
z In accordance with the Directive on Batteries and Accumulators and Waste Batteries and
Accumulators (2006 / 66
/ EC), battery collection and recycling schemes should be in place
in all EU Member States.
Handling Used Batteries
z Insulate the battery using tape to prevent shorting by metallic
objects.
z Do not disassemble the battery.
The Wii U GamePad uses a lithium-ion rechargeable battery.
Please dispose of this product in accordance with local regulations.
z Discarding batteries in your general household waste can be harmful to the environment. When
disposing of the battery, follow appropriate local guidelines and regulations.
z In accordance with the Directive on Batteries and Accumulators and Waste Batteries and Accumulators
(2006 / 66 / EC), battery collection and recycling schemes should be in place in all EU Member States.
Wii U GamePad Battery
Replacing and Removing Batteries
30 31
Troubleshooting
Troubleshooting
Wii U console suddenly turns o
Has dust collected around the air
intake or air vents?
Unplug the AC adapter from the wall socket and use a vacuum
cleaner or similar to remove the dust from the air intake or air
vents.
Has the console been placed some-
where heat can accumulate or on top
of AV equipment?
Place the console somewhere else, or create at least 10cm
of well-ventilated space around the air intake and air vents.
Is the Auto Power-Down feature
enabled?
If the Auto Power-Down feature has been enabled, the console
will power down automatically if there has been no user
interaction for a certain period of time. This period of time can
be recongured under the Auto Power-Down option in System
Settings on the Wii U Menu.
Are you using any unsupported USB
devices with your Wii U console?
If you are using USB devices that are incompatible with the
Wii U console, there is a chance that the console will switch itself
o without warning. Disconnect the USB device and only use
USB devices that have been veried as compatible by Nintendo.
See the Nintendo website (www.support.nintendo.com) for
more information.
Wii U console or controller gets hot
Are you using it in somewhere with
a high ambient temperature, or using
the controller while it is charging?
Using the console or controllers under such conditions will
cause them to become warmer. The operable environments
(room temperatures) for the console and controllers are as
follows:
Wii U console: 10 – 40°C
Wii U GamePad: 10 – 35°C
· Please be careful, as contact with the hotter parts of the controller
for long periods of time may cause skin burns, even if the controller
does not feel particularly hot to touch.
Wii U console does not turn o (power LED does not turn red)
Are you holding down the POWER
Button for at least one second?
If the Wii U console does not turn o after holding the POWER
Button down for at least one second (the power LED does not
turn red), hold the POWER Button for at least four seconds.
Please note that the power LED does not go o even when the
power is o.
· The Wii U console cannot be turned o with the Wii U GamePad
when using the Wii Menu or Wii Game Discs.
Are Standby Functions enabled? If Standby Functions are enabled (p. 14), when the console is
powered down the power LED will turn from red to orange.
Once any outstanding downloads or installations are complete,
the power LED will automatically turn back to red.
This manual covers the topics listed below. Please review the troubleshooting information carefully before
contacting Nintendo Customer Support (see Important Information booklet).
z Power and temperature of devices (below)
z Charging and batteries (p. 32)
z TV display and audio (p. 33)
z Wii U GamePad display and touch screen response (p. 33)
z Controller Operations (p. 35)
· For information on other topics, see the Troubleshooting chapter of the Wii U Electronic Manual on the
Wii U GamePad.
· For information on the Wii Menu, see the Wii Menu Electronic Manual.
· Also refer to any documentation for individual software titles or accessories.
Power and Temperature of Devices
Wii U console does not turn on
Is the AC or DC plug of the AC adapter
inserted rmly?
Ensure that the plugs are rmly inserted
(see
Quick Start Guide).
Is the power LED of the Wii U console
lit?
If the power LED does not light up after pressing the POWER
Button on the Wii U console, unplug the AC adapter from the
wall socket, wait two minutes, then plug it back in to the wall
socket.
If the power LED is ashing red, unplug the AC adapter from
the wall socket, ensure that it is not placed somewhere that
accumulates heat (e.g. on top of AV equipment) and that there
is at least 10cm of well-ventilated space around the air intake
and air vents. Wait for two minutes, then plug the AC adapter
back in to the wall socket and turn the power on.
Wii U GamePad does not turn on
Is the battery depleted? Charge the Wii U GamePad (p. 11).
If the battery LED ashes orange during charging, or if the
problem continues even though the Wii U GamePad is already
charged, take the Wii U GamePad Battery out for ten seconds.
Once replaced, check to see if it is charged (p. 26).
Is the battery correctly inserted?
Troubleshooting
32 33
Troubleshooting
Troubleshooting
TV Display and Audio
No picture on TV / no audio from TV
Is the TV set to the correct input? Press the source/input button for your TV until the Wii U screen
appears.
· If using an HDMI cable, it may take a moment before the picture
appears depending on the make of your TV. Please wait after
changing the input.
Has the connection type and/or
resolution been set correctly in System
Settings?
If you are using a new cable or TV, congure the correct settings
for the TV and the cable you are using to connect to it under
the TV option in System Settings on the Wii U Menu.
Have you disassembled or modied the
console, or connected any accessories
etc. not authorised by Nintendo?
Remove or disconnect any parts / accessories installed in or
connected to the console.
Display doesn’t match screen size
If the display expands beyond the edges of the TV screen, you can adjust it in Screen Size under the
TV option in System Settings.
· Depending on the type of TV you are using, the display may appear smaller than the screen. This can be
adjusted in your TV’s screen size settings.
Wii U GamePad Display and Touch Screen Response
Wii U GamePad screen does not turn on
Is the Wii U GamePad Battery LED
glowing blue?
If the battery LED is glowing blue, then the display has been
turned o. Press any of the buttons (except for the POWER
Button) to turn the display back on.
Does the screen turn on
several seconds after connecting
the Wii U GamePad AC Adapter
and pressing the POWER Button?
If the screen turns on after doing so, then the battery is
depleted. Leave the AC adapter connected to charge the
battery.
If the screen does not turn on, contact Nintendo Customer
Support (see
Important Information booklet).
Wii U GamePad does not turn o
Are you holding down the POWER
Button on the Wii U GamePad for at
least one second?
If the Wii U GamePad does not turn o after holding the
POWER Button down for at least one second, hold the POWER
Button for approximately four seconds.
Wii U GamePad Battery LED does not light up when turning the controller on
The battery LED lights up when charging or if the battery level is low.
Charging and Batteries
Cannot charge / charging takes a long time
Are you using a supported device? Use the Wii U GamePad AC Adapter
(WUP-011(UKV)/WUP-011(EUR)).
Is the AC adapter rmly plugged in? Unplug the AC adapter from the mains, wait at least 20 seconds,
then charge the controller by plugging the AC adapter rmly
into the AC adapter connector or cradle and the wall socket
(p. 11).
Is there a cover on the Wii U GamePad? If you are using a commercially-available cover, the Wii U GamePad
cannot be charged. Remove the cover before charging.
Are you charging the device in an
environment of 10 – 35°C?
Charge the device in an environment of 10 – 35°C. The battery
will not charge normally in warmer or cooler environments.
Is the battery LED ashing orange? Ensure that the battery is correctly installed (p. 26).
If the battery LED is still ashing orange, contact Nintendo
Customer Support (see
Important Information booklet).
Cannot use software for long periods of time even on a full charge / charging
takes a long time
Are you using the software or
charging the device in an environ-
ment under 10°C?
During use in environments cooler than 10°C, prolonged use
may not be possible, and it may take longer than usual to
charge the device.
Has the battery reached the end of its
life?
The battery life will decrease with repeated charging. If the
duration of time the battery can be used becomes extremely
low, the battery has reached the end of its life. Please replace
it with a new battery (p. 26).
The battery has expanded
Lithium-ion batteries are subject to degradation over time and can expand through repeated recharging.
This is not a malfunction or a potential safety hazard. Please replace the battery if its expansion is aecting
battery life (p. 26).
If the battery leaks, do not touch it and contact Nintendo Customer Support (see
Important
Information booklet).
34 35
Troubleshooting
Wii U GamePad screen hue changes suddenly / brightness changes and it becomes
dicult to see bright colours
Has power-saving mode been
enabled?
When enabled, the power-saving mode will automatically
adjust the screen brightness and colour gradient depending
on the picture displayed in order to reduce battery consump-
tion. This can lead to pale colours whitening and other colours
changing. To maintain xed colours and brightness levels, disable
the power-saving mode from the HOME Menu (p. 12).
Black or bright points on the Wii U GamePad screen that do not go away
Small numbers of stuck or dead pixels and occasional uneven brightness are a characteristic of LCD
screens. These are normal and should not be considered as a defect.
Controller Operations
The cursor or character moves on its own
Have the controls slipped out of
neutral position?
For the Wii U GamePad please see page 25. For other controllers,
please refer refer to their respective manuals.
Wii Remote cannot be operated (does not respond correctly)
Is the Player LED for the Wii Remote
lit?
Press any button on the Wii Remote (except for the POWER
Button).
If no Player LEDs light up, check that the batteries are inserted
correctly. If the Player LEDs still do not light up, replace both
batteries in the Wii Remote.
Has the Wii Remote been paired with
the Wii U console you are using?
Press the SYNC Button on the Wii U console and pair the
Wii Remote following the on-screen instructions.
Is the Sensor Bar too close or too far
away?
Use the Wii Remote at a distance of one to three metres from
the Sensor Bar. If the response is still erratic, adjust the sensitivity
of the Wii Remote using the Adjust Wii Remote Pointer Sensitivity
option in System Settings on the Wii U Menu.
Are there obstacles in front of the
Sensor Bar?
Remove any obstacles between the Wii Remote and Sensor Bar.
Has the Sensor Bar been positioned
correctly?
Ensure that the Sensor Bar has been positioned correctly (p. 16).
Make sure that the Sensor Bar plug has been inserted rmly.
Troubleshooting
Touch screen cannot be used (no response from touch screen)
Are there any obstacles that
could cause wireless interference
between the Wii U console and
the Wii U GamePad?
Do not use any items such as metallic TV stands or shelves,
or devices that could cause interference such as AV equipment,
microwaves or cordless phones, near the Wii U console and
Wii U GamePad.
Is the touch screen response inaccu-
rate?
If the touch screen response is inaccurate, recalibrate it using
the Wii U GamePad option in System Settings on the Wii U Menu.
If this problem prevents you from operating the Wii U Menu
using touch controls, you can use the
Control Pad and the
A Button to control the menu instead.
Have you attached a commercially-
available protective sheet to the
touch screen?
In the following circumstances, the touch screen may not
function correctly. Please refer to the documentation supplied
with the protective sheet, and reattach it correctly.
· Air or dirt has become trapped
between the protective sheet and
touch screen.
· The protective sheet is misaligned.
•Iftheprotectivesheetismisaligned,
please reattach the sheet without
pushing the edges under the
Wii U GamePad frame.
· The protective sheet has slid between
the frame and the touch screen.
· The Wii U GamePad is operating correctly if you remove the
protective sheet and touch screen controls work as normal.
Wii U GamePad picture is distorted (blocky) / sound cuts out
Are there any obstacles that
could cause wireless interference
between the Wii U console and
the Wii U GamePad?
Do not use any items such as metallic TV stands or shelves,
or devices that could cause interference such as AV equipment,
microwaves or cordless phones, near the Wii U console and
Wii U GamePad.
Due to the way wireless communication works you may experience interruptions in sound or video
during use. This is not indicative of a fault.
3736
Troubleshooting
Are there any bright sources of light
coming from near the Sensor Bar,
such as windows without curtains,
bright light bulbs, and so on?
Check for the following possible causes:
z Bright sunlight coming through windows
If there is a window uncovered by curtains or blinds near
the Sensor Bar, the Wii Remote will not function correctly.
Close the curtains or pull down the blinds.
z Sensor Bar is reected on a highly reective tabletop etc.
The reection of the Sensor Bar may cause the Wii Remote
to not function correctly. Prevent the Sensor Bar from being
reected, for example by covering reective tabletops with
a tablecloth.
z Visible light sources near the Sensor Bar
If there are any light sources (such as electric lights) near
the Sensor Bar that are visible from where you are using
the Wii Remote, these may prevent the Wii Remote from
functioning correctly. Turn o those lights if this is the case.
z Sources of infrared light near the TV
Move or stop using any items that emit light or heat
that are near the Sensor Bar, such as electric, propane
or kerosene heaters, candles or replaces, or stoves.
Is the Wii Remote pointing towards
the Sensor Bar?
Use the Wii Remote while pointing it towards the Sensor Bar.
If the Wii Remote does not function correctly after checking all of the above, press the POWER Button
on the Wii U console for at least four seconds, then unplug the Wii U AC Adapter from the wall socket
once the power LED has turned red. Wait for approximately two minutes, then plug the AC adapter back
in and turn the Wii U console on.
· If the power LED doesn’t turn red even after pressing the POWER Button for at least four seconds, unplug the
AC adapter from the plug socket.
Requesting Repairs
If you are still experiencing problems after checking and following the troubleshooting steps, you
may refer to the manufacturer’s warranty provided in the Important Information booklet and request
an inspection of the aected item by Nintendo Customer Support (see
Important Information
booklet). Irrespective of this, you may also have statutory claims against your retailer under consumer
protection legislation as the purchaser of consumer goods.
Notes
38
Notes
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
Nintendo Wii U Operating instructions
- Category
- Touch screen monitors
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Nintendo Wii U Operating instructions
-
Nintendo WUPSWAAB User manual
-
-
-
-
-
Nintendo Switch User manual
-
-
-
Other documents
-
Kyosho LED Light Set (No.CA0506) User manual
-
Hama 00115424 Datasheet
-
Splatoon Wii U GamePad User manual
-
DreamGEAR DGWII-2803 User guide
-
-
Thrustmaster 4060048 4061002 User manual
-
-
Qware QW WII1010 Datasheet
-
DreamGEAR DGWII-1027 User guide
-
