LED TV with built-in DVD player
Руководство по эксплуатации Instruction manual
H-LEDVD32V6
Телевизор цветного
изображения c
жидкокристаллическим
экраном и встроенным
DVD-проигрывателем
Title
System setup
General setup
Audio setup
Preference setup
General information
Troubleshooting
Causes of interference
Accessories
Specifications
Table of contents
Before you start
Utilization of the product
Important safeguards
Installation
Wall mounting
Stand installation
Connection
Connection
Outdoor antenna connection
Other connections
Operation
Control elements
Front panel
Back panel
Remote controller
Changing the battery
General operations
Teletext operations
OSD operation
Channel setting
Picture setting
Sound setting
Timer setting
Option setting
Screen setting
USB operation
General operations of file playback
DVD playback operation
Turn on/off DVD
Insert disc
Play the disc
Stop
Rewind/Fast forward
Previous/Next track
Subtitle
Audio
Repeat
2 3
Table of contents Before you start
Dear customer!
Thank you for purchasing our product. For safety, it is strongly recommended to read
this manual carefully before connecting, operating and/or adjusting the product and keep
the manual for reference in the future.
2
3
3
3
4
4
4
5
5
5
5
6
6
6
6
7
7
8
8
8
9
9
10
10
10
10
11
11
11
11
11
11
12
12
12
12
12
12
12
12
12
13
13
14
14
14
15
15
2 3
Table of contents Before you start
If you want to dispose this product, do not mix it with general household waste. There is
a separate collection system for used electronic products in accordance with legislation
that requires proper treatment, recovery and recycling.
Please contact your local authorities for the correct method of disposal. By doing so,
you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human
health.
Utilization of the product
Important safeguards
• Please unplug the power cord from the AC
outlet and contact a service center for repair
if following occurs: any obvious abnormality
appears in the unit, such as smoky, peculiar
smell or strange sound; liquid has been spilled or
other objects have fallen into the unit; no picture
or sound; cover or panel is broken; although you
have operated the unit following the operating
instructions, it still cannot work normally.
• This unit should only be connected to a
wall socket having grounding.
• Always disconnect the power cord and
antenna during a storm.
• Do not fix the power cord with a metal nail.
• Unplug the power cord from the AC outlet;
also unplug the signal cables from the input
ports when the unit is unused for long periods
of time.
• When unplugging the plug, always hold
the wide slot, do not touch the metal part, and
do not destroy, refit, twist, pull or roast the
power cord.
• Please contact the service center
immediately if you found that the core is
showed in the air or has been broken.
• Please replace the AC outlet if the metal
bolt cannot be inserted into the power socket
completely or it cannot be fastened even when
it was pushed in, otherwise, any accidents of
shocks and fires would happen.
• Never touch the antenna lie or power plug
if it stars to thunder.
• Do not touch the power plug with wet
hands.
• Do not use any non-rated power socket
with numerous devices jointed on one power
socket or cable device. The wire of non-
designated capacity may cause the fire due to
the generation of heat.
• All instructions must be read and
understood well before you operate the unit.
Heed all warnings and follow all instructions.
• Please use the accessories provided
by the manufacturer. Using inadequate
accessories may result in accidents.
• Please adjust the product through the
panel buttons or the remote controller, do
not remove the cover or attempt to service
the product by yourself. Do not disassemble
back cover and do not make maintenance by
yourself to avoid the electric shock.
• Over-press the panel may destroy the
product.
• Do not place the product on an unstable
cart, stand surface, tripod, bracket, or table.
The product may fall, causing serious accidents
as well as the damage to the product.
• Please place the product on a flat surface
in a well-ventilated location. Keep it away from
the burning-light, direct sunlight, vibration,
high-temperature and humidity.
• Do not place any vase, potted plant, cup,
medicine and any container with water on this
Installation
Wall mounting
For wall mounting the back panel of this
unit is equipped with 4 screw holes (4 mm
diameter, 200 mm horizontal spread distance
x 100 mm vertical spread distance). A
wall-mount bracket should be used for wall
mounting (the bracket is not included and
should be acquired separately). Manufacturer
is not responsible for improper mounting
resulting in damage of the unit.
Stand installation
Place the LED TV on a solid flat surface.
Use soft material to place over the front screen
to avoid any damage. Then put the slits of the
stand onto the fixing elements in the lower part
of the unit until a click and fix the two parts by
four screws as shown below:
4
Before you start
product. If the liquid is spilt, it may cause the
fire, electric shock or breakdown.
• Do not install it at the place on the strong
magnetic field or current field. It may cause
break down. This equipment may be observed
deterioration of the picture by electromagnetic
radiation in electromagnetic environment.
• Fasten the wheel of the product or shelf
with wheels when installing this product. If it
moves or is tipped over, it may be damaged.
• Do not place any fire source such as
candlelight close to this product or place it on
this product. If it is tipped over or fallen down, it
may cause damage or fire.
• Do not place the unit into closed space
of TV for better ventilation; it can reduce the
product lifetime. Keep a space at least 10 cm
at above, left and right of the TV.
• Please place all the signal cords behind of
rear panel.
• Do not overexert or touch the panel when
you convey the product. Do not transfer the
LCD TV up or down display direction.
• Do not transport it with the power cord
or the connection cable connected. If you
move this product with the power cord or the
connection cable connected, the damaged
power cord, connection cable or connection
terminal may cause the fire, the electric shock
or breakdown.
• 2 persons or more shall transport the
device, which is heavier than 18 kg. If you drop
or tip over the device, it can be damaged.
• The temperature of the product’s body
becomes a little higher after a long period use.
This phenomenon indicates that heat exchange
in normal working mode, thus please do not
let children or anyone who is sensitive of
temperature to touch.
All images provided herein are schematic
drawings and may differ from of real objects.
5
Connection
Connection
Outdoor Antenna Connection
Use 75Ω coaxial cable plug or 300-75Ω
impedance converter to plug in antenna input
terminal on the rear of the cabinet.
Other connections
• Connect a TV or CATV antenna to the
antenna jack.
• Connect a video source to the Composite
video input jack with RCA cable.
• Connect an audio source to the proper
Audio input jacks (left and right).
• Connect the power cord to the electric
supply outlet.
• Connect PC audio input to PC main unit
with related audio cable in PC mode.
• When using the unit as a computer screen,
connect the PC to the VGA jack of the unit by
the relevant cable.
• If the video source has a HDMI output
jack, you can connect the signal to the unit by
HDMI cable (not included).
• Component input is intended for receiving
component video signal if connected to the
component output of external signal source. To
receive audio signal for component video, please
use Left and Right audio inputs of this unit.
• Connect your headphones or earphones
(not included) to the headphone socket of this
unit. When headphones are connected, the
sound output through the built-in speakers of
this unit is mute.
• Coaxial output is intended for transmitting
multi-channel sound to an external decoder
(e.g. in 5.1-CH format). RCA cable should be
used for connection.
75 Ohm co-axis cable
TVRF antenna jack
Antenna cable connector
6
Operation
Control elements
Front panel
1
2
1. Power indicator
2. IR sensor
1. Disc slot
2. CH+/- buttons
3. VOL+/- buttons
4. MENU button
5. TV/AV button
6. POWER button
7. Power switch
8. HDMI x 3 inputs
9. Power cord
10. Audio/video input RCA
11. VGA input
12. USB port
13. Digital audio output
14. Antenna jack
15. Headphone jack
16. Component video input
17. PC audio input
Back panel
1
2
3
4
5
6
7 8 9 10 11
12
13
14
15
16
17
7
Operation
Remote controller (RC)
1
2
3
4
5
6
7
9
8
11
10
12
14
13
15
16
17
18
19
20
22
21
23
24
25
27
26
1. POWER button
2. Number buttons
3. SOURCE/REVEAL (
) button
4. SIZE (
)/ZOOM ( ) button
5. MENU button
6. ENTER button/cursor buttons (LEFT/RIGHT/
UP/DOWN)
7. VOL+/VOL- buttons
8. SLEEP/MENU button
9. LIST/REPEAT button
10. Green button/
button
11. Red button/
button
12. TEXT ( )/ button
13. HOLD ( )/ STILL button
14. CANCEL ( ) button
15. INFO/INDEX ( ) button
16.
button
17. AUDIO (
) button
18. RECALL (
) button
19. EXIT button
20. CH+/CH- buttons
21. SETUP button
22.
button
23. Yellow button/
button
24. Blue button/ button
25. E/W/ button
26. SUBTITLE/SUBPAGE ( ) button
27. DVD button
Changing the battery
1. Remove the battery compartment cover
on the back of the RC.
2. Insert two AAA batteries batteries into
the battery compartment making sure that the
correct polarity is observed.
3. Install the cover back.
• The RC should be pointed at remote
sensor within 8 meters and within 30 degrees
at the left or the right side.
• Take the battery out of the RC if it is not
used for a long time. Do not mix new and used
batteries or different types of batteries. Weak
batteries can leak and severely damage the RC.
• Do not expose the RC to shock, liquids,
and do not place it in an area with high
humidity.
1 2 3
8 9
Operation Operation
General operations
• Press POWER button on the unit or on
the RC to switch on the power. Press POWER
button again to switch the unit into standby
mode. When the unit is on, the power indicator
will be green.
• Press VOL- button repeatedly to decrease
the volume; press VOL+ button repeatedly to
increase the volume.
• Press
to cut off sound, press this button
again or increase volume to resume sound.
• Press SLEEP/MENU button repeatedly to
set the sleep time (from 10 to 240 min or off).
When sleep time is set, press this button to
display the time remaining until the auto turn off.
• Press AUDIO ( ) button in TV mode
repeatedly to switch between Nicam Stereo,
Mono, Dual I and Dual II sound modes (can be
unavailable for some channels).
• Press repeatedly TV/AV button on the
unit or press SOURCE button on the RC,
then press UP/DOWN cursor buttons to cycle
through the available source list as follows:
TV - AV - YPbPr - HDMI1 - HDMI2 - HDMI3 -
PC - Media.
• Select the TV function mode. Press
CH-/CH+ buttons to select previous or next
channels; or press number buttons to enter a
channel number from 0 to 200 directly.
• Press RECALL ( ) button on the RC
to select from the present channel and the
previously displayed channel.
• Press button to display the Favourite
channel list in TV mode (you should setup your
favourite channels in Program Edit menu).
• Press INFO button to display the preset
TV channel play information.
• Press ZOOM ( ) button repeatedly to
select an aspect ratio: Auto/4:3/16:9/Zoom1/
Zoom2. The set of available aspects can vary
depending on the current signal source.
Teletext operations (option)
Select a TV channel in order to pick up
the picture signal of Teletext. Teletext button
functions are as follows:
TEXT (
): Press this button to enter into
TEXT mode. Press this button again to enter
mixed mode. Press the button again to return
to the channel you are watching.
HOLD (
): Press this button to stop the
move to the next page. Press this button again
to cancel operation.
INDEX (
): Press this button to go to the
index page.
SIZE (
): Press this button to enlarge the
top part of the page. Press this button again to
enlarge the bottom part of the page. Press this
button third time to normal size text page view.
REVEAL (
): Press this button to reveal the
cancelled information. Press this button again
to cancel the information.
SUBPAGE (
): Press this button to select
sub-page. Input the number of sub-page and
use numeric buttons in the format 0001 for
sub page 1. The teletext will search for the sub
page. Press SUBPAGE button again to exit the
subpage mode.
CANCEL (
): Press this button to exit from
the teletext mode.
Red/Green/Yellow/Blue buttons: Press
these 4 color buttons to access directly to
corresponding color page displayed at the
lower parts of teletext screen.
OSD operation
1. Press MENU button to enter the setting
menu displayed on the screen.
2. Press LEFT/RIGHT cursor buttons on the
RC or VOL+/- buttons on the panel to select
setting page.
3. Press DOWN cursor button or ENTER
button on the RC or CH+ button on the panel
to go to the parameter list.
4. Press UP/DOWN cursor buttons on the
RC or CH+/- buttons on the panel to select a
parameter to adjust.
5. Press cursor buttons on the RC or VOL+/-
or CH+/- buttons on the panel to adjust the
8 9
Operation Operation
selected parameter.
6. Press MENU button to return to the
previous menu page. Press EXIT button on the
RC to quit the menu.
Some menu items may be in grey color,
in this case they are not adjustable. Pictures
of OSD menu are for reference only; they may
differ from the real screens.
Channel setting (only for TV source)
CHANNEL
Auto tuning
ATV Manual tuning
Programme edit
Move Menu Enter Exit
• Auto tuning: press RIGHT button to start
automatic search of available channels. To
stop the process press MENU button.
• ATV manual tuning: Press ENTER button
to enter into manual tuning menu:
Current Ch: select channel number.
Color System: select corresponding color
system.
Sound System: select corresponding sound
system.
Fine-tune: perform fine adjustment of the
current frequency.
AFC: set On/Off automatic frequency
correction.
Search: press LEFT/RIGHT buttons; the
unit will search for next available channel
downward or upward and save it under the
current number.
• Program Edit: this item allows you to sort
TV programs according to your preferences.
Enter into program edit menu:
Delete: Select the channel you want to delete.
Press red button to delete the channel.
Rename: Highlight the needed channel. Press
green button; then press UP/DOWN buttons to
select a symbol. Press LEFT/RIGHT buttons to
select the next symbol. Press green button to
confirm.
Move: Highlight the needed channel. Press
yellow button; select the position to put the
channel into. Press yellow button to confirm.
Skip: Highlight the needed channel. Press
blue button; now this channel will be skipped
when you select previous/next channels.
Favorite: Select the channel you want to edit.
If this channel is your favorite channel, you can
add the mark to the channel as your favorite
channel by pressing button.
Picture setting
PICTURE
Picture mode
Contrast
Brightness
Color
Tint
Sharpness
Color temperature
Noise reduction
Move Menu Enter Exit
• Picture Mode: User/Standard/Dynamic/
Mild.
• Contrast
• Brightness
• Color
• Tint: adjust the tone of color when your
system is in NTSC.
• Sharpness
• Color Temperature: Normal/Warm/Cool.
• Noise Reduction: Digital noise reduction
effect for reducing the video noise level: Off/
Low/Middle/High.
10
Operation
Sound setting
SOUND
Sound mode
Treble
Bass
Balance
Auto volume
SPDIF mode
Move Menu Enter Exit
• Sound mode: Standard/Music/Movie/
Sports/User.
• Treble: adjust treble frequency.
• Bass: adjust bass frequency.
• Balance: adjust balance between left and
right speaker.
• Auto volume: set the auto volume
correction on/off.
• SPDIF mode: select PCM/Auto/Off.
Timer setting
TIME
Sleep timer
Auto sleep
OSD timer
Move Menu Enter Exit
• Sleep timer: select the period until
automatic switch-off of the unit (0 - 240 min).
• Auto sleep: select the period of time after
which the unit will automatically switch off if no
operation is done.
• OSD timer: select the period of time after
which the OSD will be hidden.
Option setting
OPTION
OSD language
TT language
Aspect ratio
Blue screen
Key lock
Reset
Software upgrade (USB)
Move Menu Enter Exit
• OSD Language: select the language of
the OSD menu.
• TT Language: select teletext language.
• Aspect ratio: Auto/4:3/16:9/Zoom1/
Zoom2. The set of available aspects can vary
depending on the current signal source.
• Blue screen: set on or off blue screen
activation when no signal.
• Key lock: select ON to lock all buttons on
the panel. Set OFF to unlock the buttons.
• Reset: reset the parameters to initial
factory settings.
• Software upgrade: this option is intended
for using by qualified technicians only.
Screen setting (only for PC mode)
SCREEN
Auto adjust
Horizontal Pos.
Vertical Pos.
Clock
Phase
Move Menu Enter Exit
• Auto adjust: automatical setting of the
parameters.
• Horizontal Position: adjust horizontal
position of the image.
• Vertical Position: adjust vertical position
of the image.
• Clock: adjust the image frequency
manually.
• Phase: adjust the phase manually.
11
Operation
USB operation
Insert a USB into the USB jack. Select
Media source and press ENTER button. The
screen will show a USB playback window, in
which you can select Music, Photo, Movie and
Text contents to play by pressing LEFT/RIGHT
cursor buttons and ENTER button.
USB file systems supported: FAT,
FAT32. 2.0 USB version is supported;
maximum capacity is 320 Gb. For correct and
satisfactory operation, licensed USB devices
of famous brands should be used with this unit.
Avoid using USB devices of unknown brands.
Playback of some file formates cannot be
supported.
General operations of file playback
• Press cursor buttons to select Return
option and press ENTER button if you want to
go back to the previous menu.
• In the content menu, press cursor buttons
to select folder, press ENTER button to enter it,
then press cursor buttons to select the file you
want to watch or to listen to. When highlighting
the file, the file information will appear on the
right and picture will be previewed in the center
(not available for music files). Press ENTER
button or
button to play the selected file.
• While playback, press INFO button; the
bottom of the screen will show playback menu
in which you can select an operation by LEFT/
RIGHT cursor buttons on perform this opera-
tion by pressing ENTER button.
• While playback, press
button to pause
or resume playback. Press
button to stop
playback.
• When you select a file to play, you can
delete the selected file by pressing Red button
on the RC.
• When playing photo, movie and music
files, you can press REPEAT button to select
the repeat play mode.
• When playing music files you can press
/ buttons to fast reverse or forward. You can
press / buttons to select the desired files
manually in normal condition.
• When playing photo files, you can press
/ buttons to page up or page down the
file. Press LEFT/RIGHT cursor buttons to
rotate the image.
• Press EXIT button to stop playback and
return to the previous menu screen.
DVD player operation
Turn on and off the DVD function
Turn on the LCD TV and then select DVD
source or press DVD button to enter DVD mode.
Insert disc
• Put the disc in the intake bin, the disc
will be automatically absorbed, the player
will load the disc automatically. After loading
the disc content, it will switch to play mode
automatically.
• Insert disc with label data side facing
the front of the unit. When inserting the
disc incorrectly, you may damage the DVD
mechanism. Some slight picture noise and
some sounds can be produced when the disc
is loading, unloading and during playback, this
is normal and can be ignored.
• For some discs, after loading the content
of the disc, you need to press
button or
select from the disc menu to start.
• To eject the disc from the loader press
button on the RC.
• Only standard shape and 12-cm size discs
can be used.
Play the disc
According to the disc content, menu will
display for your selection. When playing the
disc, you may use button to toggle between
Play and Pause mode.
Manufacturer guarantees regular
playback of licensed discs only. Some AVI files
cannot be played due to their parameters and
recording conditions. Video files more than 2 Gb
having AVI extension can be played partially.
12 13
Operation Operation
Stop
While playback, press button to stop
playback. If you press
button, playback will
resume from the stop point. Press
button
twice; if afterwards you press
button,
playback will start from the beginning.
For some kinds of discs last memory
function is not available.
Rewind/Fast forward
While playback, press repeatedly /
buttons to fast reverse or forward. With each
pressing, the playback speed will increase as
follows: 2X - 4X - 8X - 16X - 32X - Normal.
Whil fast playback, press button to go to
normal speed playback.
Previous/next track/chapter/title
While playback press / buttons to
select previous or next track/chapter.
Subtitle
Press SUBTITLE button repeatedly to toggle
between different subtitle languages.
Selectable subtitle languages depend
on the availability in the DVD contents.
Audio
• Press AUDIO button to call the menu
showing various audio info, such as audio
output, audio language, etc. Such info may
differ depending on the type of the disc.
• Press AUDIO button repeatedly to toggle
between different audio languages.
Selectable audio languages depend on
the availability in the DVD contents.
Repeat
While playback press REPEAT button to
select repeat mode (repeat track/chapter/title
repeat all tracks/chapters/titles, etc.). Available
repeat modes may differ depending on the type
of the disc.
Title
Press TITLE button to display the disc title
menu. Press cursor or number buttons to
select your favorite title, then press ENTER
button to confirm. It will play from the first
chapter of selected title.
For some kinds of discs you should
press SLEEP/MENU button on the RC to turn
on/off PBC in order to use title menu function.
System setup
1. Press SETUP button to enter the setup
menu. In Setup menu, press SETUP button
again to quit the setup page.
2. Use LEFT/RIGHT cursor buttons to
choose a setup page: General setup, Audio
setup, Preference page.
3. Press DOWN cursor button to enter the
setup page selected.
4. Use UP/DOWN cursor buttons to select
the option you want to adjust.
5. Press RIGHT cursor button to enter the
adjustment list. Use UP/DOWN cursor buttons
to select the adjustment and press ENTER
button to confirm and LEFT cursor button to
return to options list.
6. To return to setup page list press LEFT
cursor button when in the option list.
General setup
General setup page
TV display
OSD lang
Screen saver
Last memory
• TV Display: select the TV picture fromat.
4:3 PanScan: The wide-screen image is
shown on the full screen, but some part is cut off.
4:3 LetterBox: The wide-screen image is
shown and black stripes appear on the top and
bottom of screen.
12 13
Operation Operation
Wide: Normal picture format.
• OSD Lang: select on-screen display
language.
• Screen Saver: Set screen saver on/off.
• Last Memory: When this function is on,
the unit can memorize the time elapsed from
the last time you played the disc. Then at the
next playing, it will resume playing from the
memorized time.
Audio setup
Audio setup page
Downmix
• Downmix: select a mode of downmix.
Preference setup
Preference page
Disc menu
Parental
Password
Default
• Disc Menu: Set the language of the disc
menu.
• Parental: The control level is for parental to
control playing content and protect your children
from violence and erotic. The disc, the level of
which is higher than the setting level cannot be
played.
• Password: Change the password. The
initial factory password is 000000. You can
set your own password. If you forget your own
password, you can use 136900 as general
password.
• Default: Restore the initial factory settings.
Pictures of OSD menu are for reference
only; they may differ from the real screens.
14
General information
Troubleshooting
Below is a table describing simple measures that can help you eliminate most problems likely
to emerge when this unit is in use. If below measures do not help, turn to a service center or to the
nearest dealer.
Symptom Cause Solution
No picture, no
sound, and no
indicator light
The power cord is not plugged in.
Contrast, brightness, color and
volume are all in the minimum value
or TV is in mute mode.
Plug the power cord in.
Alter the value of contrast,
brightness, color and volume.
Picture and
sound with
abnormity
Contrast and color are set improperly.
Color system is set improperly.
Sound system is set improperly.
Set the value of Contrast and color
properly.
Set the sound system properly.
Picture is spotted
or with snow
Signal source is low-grade or the
signal is in a lower quality.
Use the qualified signal cord.
Blue background No video signal or the signal cord is
improperly/not connected.
Connect the signal cord properly.
No sound No audio signal or the signal cord is
improperly/not connected.
Connect the audio signal cord
properly.
Set the sound system properly.
The RC does not
work
Batteries are improperly installed or
exhausted.
Make sure the positive and the
negative polarities are correct.
Reattach the battery lid.
Replace the batteries.
Causes of interference
Incorporated in your TV receiver are the most up-to-date devices to eliminate interference.
Local radiation however, can create disturbances, which visibly affect your picture. Proper
installations, a good aerial are your best safeguards against these disturbances.
• RF INTERFERENCE: Moving ripples across the screen are caused by nearby transmitting or
receiving short-wave radio equipment.
• DIATHERMY: Herringbone pattern and partial picture loss can result from the operation of
diathermy equipment from a nearby doctor’s surgery or hospital.
• SNOW: Weak TV signals from long distant stations result in an instead picture and give the
effect of falling snow. An antenna adjustment or antenna amplifier may be needed.
• GHOST: Multiple image, caused by TV signals reflected back from surrounding buildings,
hills, aircraft, etc. is minimized by correct aerial positioning.
• CAR IGNITION: Nearby cars and electrical motors can cause small streaks across the picture
or make the picture roll.
15
General information
Accessories
1. LCD TV 1 pc
2. Remote controller 1 pc
3. Battery 2 pcs
4. Stand 1 pc
Specifications
S
ize (diagonal) 31.5” (80 cm)
Response time 6.5 ms
Resolution 1366 x 768
Aspect ratio 16:9
Color system PAL, SECAM
Sound system B/G, DK, I
NICAM Stereo 2 x 8 W
Storage support CD-R/RW, DVD-R/RW, DVD+R/+RW, USB
Component video input +
AV RCA input +
USB port +
VGA input +
HDMI input x3
PC audio input +
Coaxial output +
Headphone output +
Russian and English OSD +
Progressive scan +
Digital comb filter +
Sleep timer +
Quantity of channels 200
Teletext pages 1000
USB movie, photo and audio support +
Power supply ~100-240 V, 50/60 Hz
Power consumption 85 W
Electric shock protection class II
Unit dimensions (with stand) 785 x 230 x 537 mm
Net/Gross weight 10.3 kg/11.7 kg
The LCD panel is a high technology product with many thin film transistors that can
give you a fine picture details. Occasionally, a few non-active pixels may appear on the screen
as a fixed point of blue, green, red, black or white, please note that this does not affect the
performance of your LCD TV.
Warning: Specifications may be subject to change without notice for improvement.
5. Screw 4 pcs
6. AV RCA cable 1 pc
7. Consumer information 1 pc
8. Warranty card 1 pc
9. Instruction manual 1 pc
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/