Sony DPF-W700 Operating instructions

Brand: Sony

Model: DPF-W700

Category: Digital photo frames

Type: Operating instructions

This manual is also suitable for

DPF-WA700

DPF-WA700/W700

4-400-694-13(1)

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

Digital Photo Frame

Handbook

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

Read this before using

Notes on playback

Connect the AC adaptor to an easily

accessible AC outlet. Should you notice an

abnormality in it, disconnect it from the

AC outlet immediately.

Notes on copyrights

Duplication, edition, or printing of a CD,

TV programs, copyrighted materials such

as pictures or publications, or any other

materials except for your own recording or

creation is limited to private or domestic

use only. Unless you hold copyright or

have permission of copyright holders for

the materials to be duplicated, use of those

materials beyond this limit may infringe

the provisions of the copyright law and be

subject to the copyright holder’s claim for

damages. When using photo images with

this digital photo frame, pay special

attention not to infringe the provisions of

the copyright law. Any unauthorized use or

modification of other’s portrait may also

infringe on their rights. For some

demonstrations, performances, or exhibits,

photography may be forbidden.

Recorded content not

guaranteed

Sony shall assume no responsibility for any

accidental or consequential damages or

loss of recorded content which may be

caused by use or malfunction of the digital

photo frame or memory card.

Backup recommendations

To avoid potential risk of data loss caused

by accidental operation or malfunction of

the digital photo frame, we recommend

that you save a backup copy of your data.

Notes on the LCD screen

• Do not press against the LCD screen.

The screen may become discolored, and

that may cause a malfunction.

• Exposing the LCD screen to direct

sunlight for a long period may cause

malfunctions.

• The LCD screen is manufactured using

extremely high-precision technology,

and over 99.99% of the pixels are

operational for effective use. However,

there may be some tiny black points and/

or bright points (white, red, blue, or

green in color) that constantly appear on

the LCD screen. These points are normal

for the manufacturing process and do not

affect the viewing in any way.

• Images may trail across on the LCD

screen in a cold location. This is not a

malfunction.

On descriptions in this manual

• Not all models of the digital photo frame

are available in all countries and regions.

• “Memory card” in this manual means

memory card or USB flash drive except

where further explanation is given.

• The illustrations and screen shots used in

this manual are of the DPF-WA700

unless noted otherwise. The illustrations

and screen shots used in this manual may

not be identical to what is seen in actual

use.

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

Table of Contents

Let’s Use

Identifying the parts························································ 4

Compatible Memory Card/USB flash drive····················· 6

Preparation:

Checking included items ·························8

Preparation:

Attaching the stand (DPF-W700 only)·····9

Preparation:

Turning on the photo frame···················11

Preparation:

Setting up the photo frame····················14

Enjoying a slideshow···················································· 19

Displaying the desired images ···································· 27

Enjoying Music or Internet Radio (DPF-WA700 only)·····30

Saving images in your photo frame (Import) ················ 33

Enjoying More

Deleting an image ························································ 35

Exporting an image from internal memory ··················· 38

Using the auto power ON/OFF timer···························· 41

Enjoying Network Services··········································· 44

Enjoying the Home Network········································· 52

Changing the Settings·················································· 56

Copying images and music files from a computer········ 60

Troubleshooting

If an error icon appears ················································ 66

Troubleshooting···························································· 67

Precautions ·································································· 72

Specifications ······························································· 74

Index

Index············································································· 81

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

Identifying the parts

DPF-WA700

Front

A LCD screen/Touch screen

B Sony logo

Rear

A MENU button

B VOL (Volume) +/– buttons (page 29,

31)

C Standby indicator (page 13)

D 1 (on/standby) button (page 13)

E Memory card slot (page 19)

F USB A connector (page 19)

G USB Mini-B connector (page 60)

H Slot cover (page 19)

I Speaker

J DC IN jack (page 11)

Let’s Use

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

DPF-W700

Front

A LCD screen/Touch screen

B Sony logo

Rear

A MENU button

B 1 (on/standby) button (page 13)

C Standby indicator (page 13)

D USB A connector (page 19)

E USB Mini-B connector (page 61)

F Memory card slot (page 19)

G Holes for hanging the unit on a wall

(page 10)

H Stand (page 9)

I DC IN jack (page 12)

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

Compatible Memory Card/USB flash

drive

You can view images only by inserting a memory card (“Memory Stick Duo” or SD

memory card) or USB flash drive removed from a digital camera or equivalent, into the

photo frame.

Memory cards/USB flash drive supported

by the photo frame

Adaptor

• “Memory Stick Duo” (Not

compatible/Compatible with

“MagicGate”)

• “Memory Stick PRO Duo”

• “Memory Stick PRO-HG Duo”

Not necessary

• “Memory Stick Micro” (“M2”)

• SD memory card

• SDHC memory card

Not necessary

• miniSD card

• miniSDHC card

• microSD card

• microSDHC card

• USB flash drive

“M2” adaptor

(Duo size)

miniSD/miniSDHC

adaptor

microSD/microSDHC

adaptor

Continued r

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

• The photo frame has been demonstrated to be operable with “Memory Stick Duo” with a

capacity of 32 GB or less manufactured by Sony Corporation.

• “M2” is an abbreviation for “Memory Stick Micro”. In this section, “M2” is used to describe

a “Memory Stick Micro”.

• The photo frame has been demonstrated to be operable with an SD memory card with

capacity of 2 GB or less.

• The photo frame has been demonstrated to be operable with an SDHC memory card with

capacity of 32 GB or less.

• We do not guarantee connection and proper operations with all types of memory card

devices.

• This photo frame is equipped with a “Memory Stick Duo” slot. A “Memory Stick” (standard)

cannot be used in this slot.

• When using miniSD/miniSDHC, microSD/microSDHC, or “Memory Stick Micro”, be sure

to mount it in an appropriate card adaptor. If you insert the card in a slot without an adaptor,

it may not be removable.

• In this photo frame, do not use the card adaptor with another card adaptor in which a memory

card is inserted.

• No card adaptor is supplied with the photo frame.

• For more information, see “Notes on using a memory card” (page 72).

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

Preparation: 1 Checking included items

Make sure that the following items are included:

• Digital photo frame (1)

• AC adaptor (1)

• Stand (DPF-W700 only) (1)

• Operating Instructions (1)

• CD-ROM (Digital Photo Frame Handbook) (1)

• Warranty (1) (In some regions, the warranty is not packaged together.)

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

Preparation: 2 Attaching the stand

(DPF-W700 only)

Align the claw of the stand with the bottom of the unit then insert it firmly until it clicks, as

illustrated.

• Do not place the photo frame on an unstable or tilted surface.

• Do not carry the photo frame by holding only the stand. The photo frame may fall.

Continued r

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

To hang the photo frame on a wall (DPF-W700 only)

1 Prepare commercially available

screws suitable for the holes on the

rear of the unit.

2 Drive the commercially available

screws into the wall.

Make sure the screws protrude 2.5 mm to 3

mm (approx. 1/8 inch) from the surface of

the wall.

3 Hang the photo frame on the wall by fitting the screw head to the hole

on the rear of the unit.

• Use screws suited for the wall material. The screws may be damaged, depending on the type

of material used in the wall. Drive the screws into a stud in the wall or a pillar.

• Firmly tighten the screw so that the photo frame will not fall from the wall.

• When you want to re-insert a memory card, remove the photo frame from the wall then eject

and re-insert the memory card while the photo frame is placed on a stable surface.

• Remove the stand when you hang the photo frame on a wall.

• Connect the DC cable of the AC adaptor to the photo frame and hang the photo frame on the

wall. Then plug the AC adaptor into the wall outlet.

• Sony takes no responsibility for any accidents or damage caused by defects of attachment,

misuse, natural disasters, etc.

• While the photo frame is mounted on a wall, it may fall when you operate the buttons or the

touch screen. when operating the photo frame, support it carefully so as not to drop it.

4 mm (

inch)

More than 25 mm (1 inch)

ø 5 mm (

inch)

10 mm (

inch)

Holes for hanging the unit

on the wall

2.5 mm - 3 mm

(approx.

inch)

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

Preparation: 3 Turning on the photo

frame

Connect the AC adaptor as illustrated below.

The photo frame is automatically turned on.

When using it for the first time

c Proceed to “Preparation: 4 Setting up the photo frame” (page 14).

If the initial settings have already been made

c Proceed to “Enjoying a slideshow” (page 19).

• If the photo frame is not operated for a certain time, the demonstration mode is displayed. If

any other button than 1 (on/standby) is pressed, the demonstration display will close.

• To adjust the volume of the demonstration display, press VOL +/–.

Connecting the AC adaptor (DPF-WA700)

To wall outlet

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

Connect the AC adaptor as illustrated below.

The photo frame is automatically turned on.

When using it for the first time

c Proceed to “Preparation: 4 Setting up the photo frame” (page 14).

If the initial settings have already been made

c Proceed to “Enjoying a slideshow” (page 19).

• If the photo frame is not operated for a certain time, the demonstration mode is displayed. If

any other button than 1 (on/standby) is pressed, the demonstration display will close.

Connecting the AC adaptor (DPF-W700)

To wall outlet

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

To turn on the power

Press 1 (on/standby).

The standby indicator changes from red to green.

To turn off the power

Hold 1 (on/standby) pressed. A message appears to confirm that you want to turn the

photo frmae off. Turn off the power as per the message. The standby indicator will change

from green to red.

•When 1 (on/standby) is very briefly pressed, the backlight of the LCD display turns off and

the display becomes dim. In this case, the standby lamp remains lit in green. When 1 (on/

standby) is pressed again, the backlight fully lights again and the display returns to the

previous status.

• Do not turn the photo frame off or disconnect the AC adaptor from an AC outlet or the DC

IN jack of the photo frame. Doing so may damage the photo frame.

• Connect the AC adaptor to an easily accessible wall outlet close by. If trouble occurs while

using the adaptor, immediately shut off the power by disconnecting the plug from the wall

outlet.

• Do not short the plug of the AC adaptor with a metal object. Doing so may cause a

malfunction.

• Do not use the AC adaptor placed in a narrow space, such as between a wall and furniture.

• If you will not be using the photo frame for a long time, disconnect the AC adaptor from the

DC IN jack on the unit and unplug the AC adaptor from the wall outlet after use.

• The supplied AC adaptor is exclusive for this photo frame. It must not be used with other

devices.

Turning on/off the power

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

Preparation: 4 Setting up the photo

frame

Follow the on-screen instructions.

1 Calibrate the touch screen.

1 Tap on the screen once.

A circle is displayed.

2 Tap the circles displayed one after another.

After you tap the circles several times, the

calibration display is closed.

3 Tap [Complete].

The language selection display appears.

The settings can be changed later.

• If you did not tap the right spot, try the calibration again.

• Touch Screen Calibration can also be performed, as described in “Changing the Settings”

(page 56). The purpose of the Touch Screen Calibration is to adjust the reaction of the

touch screen properly. Perform it if the touch screen does not react on the tapped position.

• This photo frame employs a resistive-film (pressure-sensitive) touch panel. The pressure-

sensitive panel operates when it detects pressure from your tapping on the panel. The panel

will respond more precisely when you apply pressure to a small area (a point). It is

recommended to tap the panel with a fingertip or plastic fine object. If the panel is tapped

with weak force or on a wide area (with the ball of a finger), it may be slow to respond.

• The touch panel responds to a single point only. Be careful that other finger or part of your

hand does not touch the screen.

2 Select the screen language.

1 Drag with your finger to scroll through the list

and tap to select the language.

2 Tap [Next].

The time zone setting display appears.

Continued r

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

3 Select the time zone.

1 Drag with your finger to scroll through the list

and tap to select the time zone.

2 Tap [Next].

A message for Wi-Fi settings appears.

3 Tap [Next] when you wish to set up the initial

settings for Wi-Fi connection.

The Wi-Fi Settings display appears.

If you wish to connect a Wi-Fi network later, tap

[Skip].

• For how to make the Wi-Fi settings, see “Changing the Settings” (page 56).

4 Set up the wireless LAN.

Select the setting method for the wireless device.

A Select this if your access point supports WPS and has a WPS button.

tGo to “A WPS Push-Button Configuration method” (page 16).

B Select this if your access point supports WPS but does not have a WPS button.

tGo to “B WPS PIN Method” (page 16).

C Select this if your access point does not support WPS.

Tap [Search] so that the connectable access point list is shown. Select an access point to

which you want to connect from this list and enter SSID (network name) and passphrase

(security key), following the on-screen instructions.

t Go to “C Search Wi-Fi Networks” (page 17).

• WPS (Wi-Fi Protected Setup) is a standard for connecting with Wi-Fi protected by security

easily. Before setting Wi-Fi, check if your access point confirms with the WPS standard

where the WPS button is, and how to use the WPS button.

• The WPS button may be named differently, depending on the access point.

• Refer also to the operating instructions for the wireless LAN router (access point). The

Network name (SSID) and Password (WEP key or WPA key) are printed on the

side or rear of the access point.

If they are not clear, contact the manufacturer of the access point.

Continued r

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

A WPS Push-Button Configuration method

1 Tap [WPS Push-Button Configuration method].

2 Press the WPS button for your access point.

Operation of the button depends on the access point.

3 Tap [Next] on the display of the photo

frame.

Connection with the access point starts, and the

network setting will be made automatically.

4 Confirm the displayed content and tap

[Complete].

The slideshow display appears.

If no image data are stored in the unit, is

displayed.

BWPS PIN Method

1 Tap [WPS PIN Method].

2 Enter the WPS PIN code displayed on the screen of the photo frame to

your access point.

• For details on entering the WPS PIN code for your access point, refer to the instruction

manual for your access point.

3 Tap [Next] on the display of the photo

frame.

Connection to the access point starts, and the

network setting will be made automatically.

Continued r

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

4 Confirm the displayed content and tap

[Complete].

The slideshow display appears.

If no image data are stored in the unit, is

displayed.

CSearch Wi-Fi Networks

If the access point does not support WPS, the photo frame can be connected to the

Wi-Fi network by searching the connectable access points.

• Before setting, prepare the access point SSID (network name) and passphrase (WEP

key or WPA key).

1 Tap [Search Wi-Fi Networks] on the display.

2 Select an access point from the connectable access point list.

If no access point is found

Tap [Add Wi-Fi Networks], enter the SSID on the display then tap [Next].

Go to step 4.

3 On the displayed screen, enter the

password then tap [Next].

By tapping the [Show password] button so that

the ✔ mark appears on it, you can confirm the

entered password.

Tap the blank area below the password so that

the screen keyboard appears.

* Input in a case-sensitive manner.

4 Tap [Auto (Recommended)] of the IP

address setting method.

Connection to the access point starts, and the

network setting will be made automatically.

If the IP address cannot be set automatically

• Select [Manual] and enter your IP address, Default Gateway, Subnet Mask ,

DNS Server (Primary), and DNS Server (Secondary) on the screen. Then tap

[Next].

Continued r

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

5 Confirm the displayed content and tap

[Complete].

The slideshow display appears.

If no image data are stored in the unit, is

displayed.

• After a specified time has passed without any operation of the photo frame, the

demonstration display appears.

During demonstration, press a button other than 1 (on/standby) to close the demonstration

display.

• To return to the previous display before completing the setting, tap at the upper

left of the display.

• Connection and setting of network devices differ for each device.

• The following items are necessary in order to connect the photo frame to the network.

– Contract with an Internet service provider

– Network device, such as an ADSL modem

– Access point or wireless router

– Setting information (SSID) on the access point

• If any wireless LAN cannot be connected, check the following:

1 Check that the access point to be used is ready.

– Check that the power is on.

– Check that the number of other Wi-Fi devices connected via the access point does not

exceed the maximum.

– Check that any access restriction, such as the MAC address filtering function, is not in

use.

– Note that the SSID is not displayed when the SSID stealth setting is valid.

2 Check the signal status.

– Check the distance between this photo frame and the access point to be used.

– Check if any device that uses the 2.4-GHz band is operating nearby.

– Note that frequencies in the IEEE 802.11a (5-GHz band) cannot be used.

• If you do not have any information about the setting content, ask the person who set the

access point, the administrator, or the provider.

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

Enjoying a slideshow

Insert a memory card or USB flash drive.

Insert the memory card or USB flash drive firmly into the corresponding slot with its front

facing away from the screen. Playback automatically begins, and images in the memory

card or USB flash drive are displayed one after another as a slideshow.

xDPF-WA700

xDPF-W700

Have the labels of

memory cards facing

outward

USB flash drive

SD memory card

“Memory Stick Duo”

Open the Slot cover

Have the labels of

memory cards facing

outward

USB flash drive

SD memory card

“Memory Stick Duo”

Continued r

Table of

Contents

Let’s Use Enjoying More Troubleshooting Index

To remove the memory card

Remove the memory card from its slot in the opposite direction from which it was inserted.

Do not remove the memory card while an image is displayed on the screen. Doing so may

damage the recorded data in the memory card. It is better to press MENU on the rear of the

unit to display the menu before removing a memory card.

• If playback does not start even if you insert a memory card, check the direction and reinsert

it.

• When no memory card is inserted, if no image is stored in internal memory, the

demonstration display appears automatically. The demonstration display closes when a

memory card with image data is inserted, or when any button other than 1 (on/satndby) is

pressed.

• Do not simultaneously insert multiple memory cards and USB flash drive into the memory

card slots A/B or the USB connector. Do not insert memory cards into slots A and B

simultaneously. It may be a cause of breakage of the photo frame.

• Note the following when you select a slideshow using the image stored in a memory card.

– Owing to the characteristics of memory card devices, images may be subject to data errors

when read too often.

– Do not run a slideshow for a long time with a small number of images. This may cause data

errors.

– We recommend you back up images in the memory card often.

• The slideshow will not start from the point where you stopped if you turn off.

• When the screen is too bright, it may make you feel nauseous. Be careful not to have the

brightness set too high when you use the photo frame.

• An image file shot with a DSC that doesn’t support Exif rotate tag recording cannot be

rotated automatically.

Page is loading ...

Sony DPF-W700 Operating instructions

Brand: Sony

Model: DPF-W700

Category: Digital photo frames

Type: Operating instructions

This manual is also suitable for

DPF-WA700

Download PDF

report

Sony DPF-W700 Operating instructions

This manual is also suitable for

Sony DPF-W700 Operating instructions

Related papers

Other documents