Stainless Steel Bug Zapping Light
Installation Instructions
1. Remove from box
2. Remove cage from safety light
housing - hold light by
stainless steel hood, move
cage from right to left to
release from track and
remove.
3. Turn on/off switch to “ON”
*Do not need to access unless rechargeable
battery needs to be replaced.
4. Turn UV/light switch to UV for pest
control or to light for illumination
only. (Device will also give off low
light on UV setting)
5. Replace Safety Cage into its
locked position
6. Place bottom of Safety Cage into
one end of stainless steel tube.
Place ground stake into other end
of stainless steel tube.
Rechargeable Solar
Battery housing -
includes battery
/
