Viking VMTK272SS Installation guide

Viking
Brand
Viking
Model
VMTK272SS
Type
Installation guide

Viking VMTK272SS is a built-in trim kit, designed for use with Viking convection and Conventional microwave ovens. This trim kit allows you to install your microwave oven seamlessly into your cabinetry, giving it a built-in look.

The VMTK272SS trim kit is constructed from durable materials, including metal and plastic, and is designed to withstand the heat and humidity of a kitchen environment. It comes with all the necessary hardware for installation, including screws, brackets, and a template.

The VMTK272SS trim kit is compatible with Viking microwave ovens that have a 24-inch wide and 17-inch tall cavity. It is also compatible with microwave ovens that have a 20-inch wide and 16-3/4-inch tall cavity.

Viking VMTK272SS is a built-in trim kit, designed for use with Viking convection and Conventional microwave ovens. This trim kit allows you to install your microwave oven seamlessly into your cabinetry, giving it a built-in look.

The VMTK272SS trim kit is constructed from durable materials, including metal and plastic, and is designed to withstand the heat and humidity of a kitchen environment. It comes with all the necessary hardware for installation, including screws, brackets, and a template.

The VMTK272SS trim kit is compatible with Viking microwave ovens that have a 24-inch wide and 17-inch tall cavity. It is also compatible with microwave ovens that have a 20-inch wide and 16-3/4-inch tall cavity.

Installation Guide
Microwave Built-In Trim Kit
VMTK272, VMTK302, VMTK362,
VMTK277, VMTK307 VMTK367
1E
Minimum Cutout Opening Width 24-3/8" (619.13 mm)
Maximum Cutout Opening Width 24-11/16" (627.06 mm)
Minimum Cutout Opening Height 16
-
3/4" (425.5 mm)
Maximum Cutout Opening Height 17" (431.8 mm)
Maximum Height distance between holes 14-1/4" (361.825 mm)
Distance between centerline to holes
12-13/16" (324.65 mm)
Distance between holes A 25-9/16" (649.3 mm)
Distance between centerline to holes
14-5/16" (362.75 mm)
Distance between holes B 28-9/16" (725.5 mm)
15-13/32" (391.45 mm)
Center Line
BUILT-IN TRIM KIT TEMPLATE
FOR CUSTOM SERIES MICROWAVE OVEN
1. Align the mounting template center line with the center of the cutout
and the floor line with the floor of the cutout. Tape it into place.
2. For VMTK272, predrill 4 holes marked A with a 1/16" drill bit.
For VMTK302, predrill 4 holes marked B with a 1/16" drill bit.
3. Remove template from the cabinet.
TINSKB182MRR0
Floor Line of Cutout Opening
USE THIS SIDE OF TEMPLATE FOR MODELS
VMTK272 and VMTK302 ONLY.
1-5/32"
(29.6 mm)
IMPORTANT–Please Read and Follow!






• Theinstallershouldleavetheseinstructionswiththeconsumerwhoshouldretainforlocalinspector’suseandfor
futurereference.

 or



Parts Included in VMTK kits
Front Frame
QTY 1
Back Frame
QTY 1
Front Frame Assembly QTY 1
Bottom Duct Assembly QTY 1
Screw A (1/2" length)
QTY 10 *
Screw B (1-3/4" length)
QTY 4
27" & 30"Surface Mount
Template 2-sided
or 36"Surface Mount
Template single-sided
QTY 1
Cushion QTY 3
Duct (A)-1 QTY 1 * Duct (A)-3 QTY 1 *
Duct (B) QTY 1 *
*
Duct (C) QTY 1 *
Duct (A)-2 QTY 1 *
Screw C (3/4" length)
QTY 2
*VMTK277, VMTK307 and VMTK367 ONLY.
E
Basic Specifications
MicrowaveOven Built-InCustomTrimKits
Description CONVECTIONVMOC206/CVMOC206 VMTK277 VMTK307 VMTK367
        


       


  













    
    
    














       
Description CONVENTIONALVMOS201/CVMOS201 VMTK272 VMTK302 VMTK362
        


       


  













 






 






    


 


  


       
E
Cabinet or Wall Cutout

1






Note: 




A
B
D
E
C
1
SurfaceMountCutoutDimensions

FLUSH MOUNT INSTALLATION
CONVECTION CONVENTIONAL
 
    
  


    
  
 

  

  
















ELECTRICAL OUTLET LOCATION: NOT
1
 

2





EXHAUST DUCT ASSEMBLY: 

2
3







EXHAUST DUCT ASSEMBLY: 


3
4









EXHAUST DUCT ASSEMBLY: 

4
5









EXHAUST DUCT ASSEMBLY: 

 5
Exhaust Duct Assembly
E
5
EXHAUST DUCT ASSEMBLY:

5
5
B
EXHAUST DUCT ASSEMBLY:


5
25ONLY
MOUNTING TEMPLATE: 






















A
Exhaust Duct Assembly Surface Installation
6
NOTE:



DETAIL A

BOTTOM DUCT ASSEMBLY
SCREW C
BOTTOM DUCT ASSEMBLY: 
1


2

6

7
CABINET INSTALLATION:       
       

7


E
Surface Installation Flush Mount Installation
8




CABINET INSTALLATION: 

8
9










FRAME INSTALLATION: 

9


!

DECORATION INSTALLATION: 


!

(:
 
 
 
 

"
FLUSH MOUNT INSTALLATION: 



 





"
DECORATION INSTALLATION: 


!
E
#




OVER OVEN INSTALLATION: 
#


Installation


  
  
Flush Mount Installation
CONVECTION CONVENTIONAL
     




























   
















Page is loading ...
1
IMPORTANT–Prière de Lire et de Suivre !








• L’installateurdevralaissercesdirectivesauclientquidevralesconserverpourl’usaged’uninspecteurlocaletpour
référenceultérieure.
 
  

 

Minimum Cutout Opening Width 24-3/8" (619.13 mm)
Maximum Cutout Opening Width 24-11/16" (627.06 mm)
Minimum Cutout Opening Height 16
-
3/4" (425.5 mm)
Maximum Cutout Opening Height 17" (431.8 mm)
Maximum Height distance between holes 14-1/4" (361.825 mm)
Distance between centerline to holes
12-13/16" (324.65 mm)
Distance between holes A 25-9/16" (649.3 mm)
Distance between centerline to holes
14-5/16" (362.75 mm)
Distance between holes B 28-9/16" (725.5 mm)
15-13/32" (391.45 mm)
Center Line
BUILT-IN TRIM KIT TEMPLATE
FOR CUSTOM SERIES MICROWAVE OVEN
1. Align the mounting template center line with the center of the cutout
and the floor line with the floor of the cutout. Tape it into place.
2. For VMTK272, predrill 4 holes marked A with a 1/16" drill bit.
For VMTK302, predrill 4 holes marked B with a 1/16" drill bit.
3. Remove template from the cabinet.
TINSKB182MRR0
Floor Line of Cutout Opening
USE THIS SIDE OF TEMPLATE FOR MODELS
VMTK272 and VMTK302 ONLY.
1-5/32"
(29.6 mm)
Pièces Comprises dans le Kit VMTK

 1

 1
  1
 1 *
Vis A (1/2 po )
 10 *
Vis B (1-3/4 po
)  4
Gabarit à montage en surface
2 faces de 27 & 30 po
ou gabarit à montage en
surface simple face de 36 po
QTÉ 1
Coussin QTY 3
Conduit (A)-1  1 *
Conduit (A)-3 1 *
Conduit (B)  1 *
*
Conduit (C)  1 *
Conduit (A)-2 1 *
Vis
C (3/4 po )
 2
UNIQUEMENT.
Spécifications de Base
Fouràmicro-ondes Kitsdegarnitureàencastrer
Descriptión CONVECTIONVMOC206/CVMOC206 VMTK277 VMTK307 VMTK367
      
 


     
 



  
















  



  



  













     
 
Descriptión TRADITIONNELVMOS201/CVMOS201 VMTK272 VMTK302 VMTK362
      
 


     
 



  


































  


 
   


     
 
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Instrucciones de Instalación
Jue
go de Molduras para
Empotrado para Horno Microondas
VMTK272, VMTK302, VMTK362,
VMTK277, VMTK307 VMTK367
1 1
IMPORTANTE - Lea y siga las instrucciones






• Elinstaladordebedevolverestasinstruccionesalclientequiendebeconservarlasparausodelinspectorlocalypara
referenciasfuturas.



  

Minimum Cutout Opening Width 24-3/8" (619.13 mm)
Maximum Cutout Opening Width 24-11/16" (627.06 mm)
Minimum Cutout Opening Height 16
-
3/4" (425.5 mm)
Maximum Cutout Opening Height 17" (431.8 mm)
Maximum Height distance between holes 14-1/4" (361.825 mm)
Distance between centerline to holes
12-13/16" (324.65 mm)
Distance between holes A 25-9/16" (649.3 mm)
Distance between centerline to holes
14-5/16" (362.75 mm)
Distance between holes B 28-9/16" (725.5 mm)
15-13/32" (391.45 mm)
Center Line
BUILT-IN TRIM KIT TEMPLATE
FOR CUSTOM SERIES MICROWAVE OVEN
1. Align the mounting template center line with the center of the cutout
and the floor line with the floor of the cutout. Tape it into place.
2. For VMTK272, predrill 4 holes marked A with a 1/16" drill bit.
For VMTK302, predrill 4 holes marked B with a 1/16" drill bit.
3. Remove template from the cabinet.
TINSKB182MRR0
Floor Line of Cutout Opening
USE THIS SIDE OF TEMPLATE FOR MODELS
VMTK272 and VMTK302 ONLY.
1-5/32"
(29.6 mm)
Partes incluidas en los juegos VMTK

CANT. 1
nuevo marco de
CANT. 1
 CANT. 1
Conjunto de ducto inferior CANT. 1
Tornillo A (1/2" de largo)
CANT. 10 *
Tornillo B (1-3/4" de
largo)
CANT. 4
Plantilla para montaje en superficie
de dos caras de 27" y 30"
o plantilla para montaje en
superficie de una cara de 36"
CANT. 1
*
Cojín
CANT. 3
Ducto (A)-1 CANT. 1 * Ducto (A)-3 CANT. 1 *
Ducto (B) CANT. 1 *
Ducto (C) CANT. 1 *
Ducto (A)-2 CANT. 1 *
Tornillo C (3/4" de largo)
CANT. 2
*SÓLO VMTK277, VMTK307 y VMTK367.
Especificaciones Básicas
HornoMicroondas JuegodeMoldurasparaEmpotrado
Descripción CONVECCIÓNVMOC206 VMTK277 VMTK307 VMTK367
        




   








  
















 
  
  

  
  


 
  

















       
Descripción CONVENCIONALVMOS201/CVMOS201 VMTK272 VMTK302 VMTK362
        




       



  
















 





















 



 



 


       
Page is loading ...
Page is loading ...
Page is loading ...
#






figura
figura
INSTALACIÓN SOBRE EL HORNO: El espacio entre el microondas
y el horno inferior
#


Instalación



  
  
CONVECCIÓN CONVENCIONAL
     















 













  














Instalación del montaje al ras




 


  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

Viking VMTK272SS Installation guide

Viking
Brand
Viking
Model
VMTK272SS
Type
Installation guide

Viking VMTK272SS is a built-in trim kit, designed for use with Viking convection and Conventional microwave ovens. This trim kit allows you to install your microwave oven seamlessly into your cabinetry, giving it a built-in look.

The VMTK272SS trim kit is constructed from durable materials, including metal and plastic, and is designed to withstand the heat and humidity of a kitchen environment. It comes with all the necessary hardware for installation, including screws, brackets, and a template.

The VMTK272SS trim kit is compatible with Viking microwave ovens that have a 24-inch wide and 17-inch tall cavity. It is also compatible with microwave ovens that have a 20-inch wide and 16-3/4-inch tall cavity.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents