Sharkoon VAYA Specification

Sharkoon
Brand
Sharkoon
Model
VAYA
Category
Computer cases
Type
Specification

Sharkoon VAYA is an ATX case with a front-I/O featuring 2x USB2.0 and 2x audio connectors. It has 4x 5.25" drive bays, 4x 3.5" bays for HDDs (internal), and 1x 3.5" mounting bay (external). The case has a black interior painting and 7 slots for add-on cards. It comes with a 120 mm LED fan pre-installed in the case front, and there are additional fan brackets for the side panel (120 or 140 mm fan) and the rear panel (80, 92, or 120 mm fan). The case has a cable management system, and it supports water cooling.

Sharkoon VAYA is an ATX case with a front-I/O featuring 2x USB2.0 and 2x audio connectors. It has 4x 5.25" drive bays, 4x 3.5" bays for HDDs (internal), and 1x 3.5" mounting bay (external). The case has a black interior painting and 7 slots for add-on cards. It comes with a 120 mm LED fan pre-installed in the case front, and there are additional fan brackets for the side panel (120 or 140 mm fan) and the rear panel (80, 92, or 120 mm fan). The case has a cable management system, and it supports water cooling.

www.sharkoon.com
Manual
VaYa EconomY
Table of contents page
1. Features 1
2. Package contents 2
3. The case at a glance 3
4. Mounting a mainboard 6
5. Mounting a power supply 8
6. Mounting a hard disk drive 9
7. Mounting an optical drive 10
8. Mounting a 3.5" device 12
9. Mounting an add-on card 13
10. Mounting additional fans / optimized airflow 13
Dear customer!
Congratulations for purchasing this premium quality SHARKOON product. For a long life time and to take full
advantage of this product we recommend you to read this manual completely.
Enjoy our product!
SHARKOON Technologies
ECONOMY
VaYa EconomY
1. Features
• ATXcase
• 4x5.25"drivebays
• 4x3.5"baysforHDDs(internal)
• 1x3.5"mountingbay(external)
• Front-I/O:
2xUSB2.0,2xaudio
• Blackinteriorpainting
• 7slotsforadd-oncards
• Plasticfrontpanelwithmeshairinlet
• QuickfastenersforopticaldrivesandHDDs,mainboardmountingpanelwithinstallation
opening for coolers
• 2openingsforwatercooling
• Cablemanagementsystem
• Fanconguration:
• Dimensions:465x185x440mm(LxWxH)
• Weight:~5kg
Casefront 1x120mmLEDfan
(red/pre-installed)
Sidepanel 1x120mmor1x140mmfan
(optional)
Rear panel 1x80mm,92mmor120mmfan
(optional)
1
VaYa EconomY
2. Package contents
• ATXcase“Vaya”
• Accessorykit
9xstand-offsformainboard 25xscrewsformainboardand
drivemounting(3.5"and5.25")
4xscrewsforPSUmounting
16xscrewsforHDDmounting 1xlockattachmentand
corresponding screw
Note:
If you are missing any of the items listed above, please contact our customer service immediately:
suppor[email protected] (Germany and Europe)
suppor[email protected] (international).
2
VaYa EconomY
3. The case at a glance
D
A
B
C
E
ba a
A–5.25"mountingbays
B–3,5"mountingbay
C–FrontI/Owith:
a–2xUSB2.0and
b–2xaudioconnectors
D–behindtheMeshpanel:120mmLEDfan(pre-installed)
E–PowerbuttonandLED
F–ResetbuttonandLED
Front view
Sideview(closed/left)
A
B
A–Fanbracket(120or140mm)
B–Airinlet
3
VaYa EconomY
Sideview(opened/left)
A–Mountingbaysfor5.25"devices
B–Mainboardmountingpanel
featuring:
a–InstallationopeningforCPU
coolers and
b–Cablemanagementsystem
C–Quickfastenersforopticaldrives
D–Quickfastenersforharddisk
drives
D
A
B
C
b
a
Rear view
D
E
A
B
C
F
F
F
F
A–OpeningforI/Oshield
B–Openingsforwatercooling
C–Fanbracket(80,92or120mm)
D–Slotbezels
E–PSUbracket
F–Thumbscrews
4
VaYa EconomY
Viewfrombelow
A
B
A A
A
A–Casefeet
B–Airinletforpowersupply
D
E
A
B
C
F
Connectorsfor:
A–HDD-LED
B–ResetSwitch
C–PowerSwitch
D–PowerLED+
E–PowerLED–
G
F–USBconnectoroftheUSBfronthub
G–Audioconnectors(HDAudioandAC’97)
The internal cables and connectors
Note:
For further information on how to install the intended devices, refer to their respective user
documentation.
5
VaYa EconomY
4. Mounting a mainboard
1. Removethethumbscrewsonthecase’srearsideandtaketheleftsidepaneloffthecase.
Laydownthecasesidewiseonanevensurface.
2.Themountingpanelofthemainboardprovidesvariousdrillingsforstand-offs(g.1).
g.1
Themainboardcontainsspecialscrewopenings(g.2).
g.2
Place the mainboard onto the mounting panel. You have to screw a stand-off into every drilling of the
mountingpanelyoucanseethroughthemainboard’sscrewopenings.
6
VaYa EconomY
3. Remove the mainboard and screw the stand-offs into the respective drillings of the mounting panel
(g.3).
g.3
(Stand-offs)
4.PresstheI/Oshield(deliveredwiththemainboard)intotheI/Oshieldopeninginthecase’srearpanel.
5. Place the mainboard back onto the stand-offs and attach it to the mainboard using the screws for
mainboardmounting(g.4).
(Screwsformainboardmounting)
g.4
6.Connectthecase'sfrontI/Ocablestotherespectiveconnectorsofthemainboard(alsorefertoyour
mainboard’smanualforfurtherinformation).
7
VaYa EconomY
5. Mounting a power supply
1. SetupthecaseinfrontofyouandputthePSUagainstthePSUbracketonthecase’srearsidefromthe
inside(g.5).
 g.5
2.AttachthePSUtothecasefromtheoutsideusingtheincludedscrewsforPSUmounting(g.6).
g.6
(ScrewsforPSUmounting)
8
VaYa EconomY
6. Mounting a hard disk drive
1. Take the right side panel off the case.
2.RemovethequickfastenersfrombothsidesoftheHDDmountingbayinwhichyouwanttoinstallthe
harddiskdrive(g.7).
g.7
3.SlidetheHDD(itsconnectorfacingbackwards,itslabelfacingtothetop)intothecase'sHDDmounting
bayfromtheinside(g.8).
g.8
4.AttachtheHDDfrombothsidesusingtherespectivequickfasteners(g.9).
g.9
Note:
If you want to transport the case we recommend securing (additionally) the installed drives using the
respective mounting screws:
g.10
5.ConnecttheHDDtothePSUandthemainboard.
(ScrewsforHDDmounting)
9
VaYa EconomY
7. Mounting an optical drive
1. Reach into the case and press the 5.25" front bezel of the mounting bay in which you want to install the
driveoutofthecase'sfrontpanel(g.11).Removethequickfastenersfrombothsidesofthemounting
bay(g.12).
g.11
g.12
(Incasethereisametalbezelcoveringthemountingbay,removeitbyusingagripper.)
3. Slidetheopticaldriveintothemountingbayfromthefrontuntilthedriveisushwiththefrontpanel
(g.13).
g.13
10
VaYa EconomY
4.AttachtheHDDfrombothsidesusingtherespectivequickfasteners(g.14).
g.14
(Screwsfordrivemounting)
Note:
If you want to transport the case we recommend securing (additionally) the installed drives using the
respective mounting screws (fig. 15).
g.15
5.ConnecttheopticaldrivetothePSUandthemainboard.(Replacethesidepanelstothecase.)
11
VaYa EconomY
8. Mounting a 3.5" device
(Takebothsidepanelsoffthecase.)
1. Reachintothecaseandpressthe3.5"frontbezelofthe3.5"mountingbayoutofthecase'sfrontpanel
(g.15).Removethequickfastenersfrombothsidesofthemountingbay(g.16).
g.16
2.Slidethe3.5"deviceintothemountingbayfromthefrontuntilthedeviceisushwiththefrontpanel
(g.17).
g.17
3. Attachtheinstalleddevicetothecasefrombothsidesusingtheincludedmountingscrews(g.18).
g.18
(Scewsfordrivemounting)
4.Connectthe3.5"deviceasdescribedinitsuserdocumentation.(Replacethesidepanelstothecase.)
12
VaYa EconomY
9. Mounting an add-on card
(Taketheleftsidepaneloffthecase.)
1. Remove the metal bezel covering the add-on card slot bay by using a gripper.
2.Inserttheadd-oncardintotherespectivemainboardslotandre-attachitusingthexationscrew.
10. Mounting additional fans / optimized airflow
1. Holdthefanagainsttherespectivebracketfromtheinside(e.g.inthesidepanel).
2.Attachthefantothefanbracketusingthecorrespondingmountingscrews.
Note:
During fan mounting make sure that (cool) air is taken in on the case’s front side/bottom and blown
out on its back side/top. The PC components with the highest heat development should be placed
directly within this airflow.
Legal disclaimer:
AsacontinuingpolicyofproductimprovementatSHARKOON,thedesignandspecicationsaresubject
tochangewithoutpriornotice.Nationalproductspecicationsmayvary.
Allrightsreservedespecially(alsoinextracts)fortranslation,reprinting,reproductionbycopyingor
othertechnicalmeans.Infringementswillleadtocompensation.
Allrightsreservedespeciallyincaseofassignationofpatentorutilitypatent.Meansofdeliveryand
technicalmodicationsreserved.
Disposalofyouroldproduct:
Yourproductisdesignedandmanufacturedwithhighqualitymaterialsandcomponents,whichcan
be recycled and reused.
Whenthiscrossed-outwheeledbinsymbolisattachedtoaproduct,itmeanstheproductiscoveredby
theEuropeanDirective2002/96/EC.
Please be informed about the local separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal
household waste. The correct disposal of your old product will help prevent potential negative
consequences to the environment and human health.
©SHARKOONTechnologies2011
www.sharkoon.com
13
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15

Sharkoon VAYA Specification

Sharkoon
Brand
Sharkoon
Model
VAYA
Category
Computer cases
Type
Specification

Sharkoon VAYA is an ATX case with a front-I/O featuring 2x USB2.0 and 2x audio connectors. It has 4x 5.25" drive bays, 4x 3.5" bays for HDDs (internal), and 1x 3.5" mounting bay (external). The case has a black interior painting and 7 slots for add-on cards. It comes with a 120 mm LED fan pre-installed in the case front, and there are additional fan brackets for the side panel (120 or 140 mm fan) and the rear panel (80, 92, or 120 mm fan). The case has a cable management system, and it supports water cooling.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents