2. Computers & electronics
  3. Computer components
  4. Chassis components
  5. Computer cases
  6. Sharkoon
  7. Vaya Value

Sharkoon Vaya Value, VAYA VALUE WHITE Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Sharkoon Vaya Value Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
www.sharkoon.com
Manual
VaYa VaLUE
Table of contents page
1. Features 1
2. Package contents 2
3. The case at a glance 3
4. Mounting a mainboard 6
5. Mounting a power supply 8
6. Mounting a hard disk drive 9
7. Mounting an optical drive 10
8. Mounting a 3.5" device 12
9. Mounting an add-on card 13
10. Mounting additional fans / optimized airflow 13
Dear customer!
Congratulations for purchasing this premium quality SHARKOON product. For a long life time and to take full
advantage of this product we recommend you to read this manual completely.
Enjoy our product!
SHARKOON Technologies
VALUE
VaYa VaLUE
1. Features
• ATXcase
• 4x5.25"drivebays
• 4x3.5"baysforHDDs(internal)
• 1x3.5"mountingbay(external)
• Front-I/O:
1xUSB3.0,1xUSB2.0and2xaudio
• Blackinteriorpainting
• 7slotsforadd-oncards
• Plasticfrontpanelwithmeshairinlet
• QuickfastenersforopticaldrivesandHDDs,mainboardmountingpanelwithinstallation
opening for coolers
• 2openingsforwatercooling
• Cablemanagementsystem
• Fanconguration:
• Dimensions:465x185x440mm(LxWxH)
• Weight:~5kg
Casefront 1x120mmLEDfan
(red/pre-installed)
Sidepanel Acryl
Rear panel 1x80mm,92mmor
120mmfan(optional)
1
VaYa VaLUE
2. Package contents
• ATXcase“Vaya”
• Accessorykit
9xstand-offsformainboard 25xscrewsformainboardand
drivemounting(3.5"and5.25")
4xscrewsforPSUmounting
16xscrewsforHDDmounting 1xlockattachmentand
corresponding screw
Note:
If you are missing any of the items listed above, please contact our customer service immediately:
suppor[email protected] (Germany and Europe)
suppor[email protected] (international).
2
VaYa VaLUE
3. The case at a glance
D
A
B
C
E
ba a
A–5.25"mountingbays
B–3,5"mountingbay
C–FrontI/Owith:
a–1xUSB3.0,1xUSB2.0 and
b–2xaudioconnectors
D–behindtheMeshpanel:120mmLEDfan(pre-installed)
E–PowerbuttonandLED
F–ResetbuttonandLED
Front view
Sideview(left)
A–Acylicsidepanel
3
A
VaYa VaLUE
Sideview(opened/left)
A–Mountingbaysfor5.25"devices
B–Mainboardmountingpanel
featuring:
a–InstallationopeningforCPU
coolers and
b–Cablemanagementsystem
C–Quickfastenersforopticaldrives
D–Quickfastenersforharddisk
drives
D
A
B
C
b
a
Rear view
D
E
A
B
C
F
F
F
F
A–OpeningforI/Oshield
B–Openingsforwatercooling
C–Fanbracket(80,92or120mm)
D–Slotbezels
E–PSUbracket
F–Thumbscrews
4
VaYa VaLUE
Viewfrombelow
A
B
A A
A
A–Casefeet
B–Airinletforpowersupply
D
E
A
B
C
F
Connectorsfor:
A–HDD-LED
B–ResetSwitch
C–PowerSwitch
D–PowerLED+
E–PowerLED–
G
F–USBconnectoroftheUSBfronthub
G–Audioconnectors(HDAudioandAC’97)
The internal cables and connectors
Note:
For further information on how to install the intended devices, refer to their respective user
documentation.
5
VaYa VaLUE
4. Mounting a mainboard
1. Removethethumbscrewsonthecase’srearsideandtaketheleftsidepaneloffthecase.
Laydownthecasesidewiseonanevensurface.
2.Themountingpanelofthemainboardprovidesvariousdrillingsforstand-offs(g.1).
g.1
Themainboardcontainsspecialscrewopenings(g.2).
g.2
Place the mainboard onto the mounting panel. You have to screw a stand-off into every drilling of the
mountingpanelyoucanseethroughthemainboard’sscrewopenings.
6
VaYa VaLUE
3. Remove the mainboard and screw the stand-offs into the respective drillings of the mounting panel
(g.3).
g.3
(Stand-offs)
4.PresstheI/Oshield(deliveredwiththemainboard)intotheI/Oshieldopeninginthecase’srearpanel.
5. Place the mainboard back onto the stand-offs and attach it to the mainboard using the screws for
mainboardmounting(g.4).
(Screwsformainboardmounting)
g.4
6.Connectthecase'sfrontI/Ocablestotherespectiveconnectorsofthemainboard(alsorefertoyour
mainboard’smanualforfurtherinformation).
7
VaYa VaLUE
5. Mounting a power supply
1. SetupthecaseinfrontofyouandputthePSUagainstthePSUbracketonthecase’srearsidefromthe
inside(g.5).
 g.5
2.AttachthePSUtothecasefromtheoutsideusingtheincludedscrewsforPSUmounting(g.6).
g.6
(ScrewsforPSUmounting)
8
VaYa VaLUE
6. Mounting a hard disk drive
1. Take the right side panel off the case.
2.RemovethequickfastenersfrombothsidesoftheHDDmountingbayinwhichyouwanttoinstallthe
harddiskdrive(g.7).
g.7
3.SlidetheHDD(itsconnectorfacingbackwards,itslabelfacingtothetop)intothecase'sHDDmounting
bayfromtheinside(g.8).
g.8
4.AttachtheHDDfrombothsidesusingtherespectivequickfasteners(g.9).
g.9
Note:
If you want to transport the case we recommend securing (additionally) the installed drives using the
respective mounting screws:
g.10
5.ConnecttheHDDtothePSUandthemainboard.
(ScrewsforHDDmounting)
9
VaYa VaLUE
7. Mounting an optical drive
1. Reach into the case and press the 5.25" front bezel of the mounting bay in which you want to install the
driveoutofthecase'sfrontpanel(g.11).Removethequickfastenersfrombothsidesofthemounting
bay(g.12).
g.11
g.12
(Incasethereisametalbezelcoveringthemountingbay,removeitbyusingagripper.)
3. Slidetheopticaldriveintothemountingbayfromthefrontuntilthedriveisushwiththefrontpanel
(g.13).
g.13
10
VaYa VaLUE
4.AttachtheHDDfrombothsidesusingtherespectivequickfasteners(g.14).
g.14
(Screwsfordrivemounting)
Note:
If you want to transport the case we recommend securing (additionally) the installed drives using the
respective mounting screws (fig. 15).
g.15
5.ConnecttheopticaldrivetothePSUandthemainboard.(Replacethesidepanelstothecase.)
11
VaYa VaLUE
8. Mounting a 3.5" device
(Takebothsidepanelsoffthecase.)
1. Reachintothecaseandpressthe3.5"frontbezelofthe3.5"mountingbayoutofthecase'sfrontpanel
(g.15).Removethequickfastenersfrombothsidesofthemountingbay(g.16).
g.16
2.Slidethe3.5"deviceintothemountingbayfromthefrontuntilthedeviceisushwiththefrontpanel
(g.17).
g.17
3. Attachtheinstalleddevicetothecasefrombothsidesusingtheincludedmountingscrews(g.18).
g.18
(Scewsfordrivemounting)
4.Connectthe3.5"deviceasdescribedinitsuserdocumentation.(Replacethesidepanelstothecase.)
12
VaYa VaLUE
9. Mounting an add-on card
(Taketheleftsidepaneloffthecase.)
1. Remove the metal bezel covering the add-on card slot bay by using a gripper.
2.Inserttheadd-oncardintotherespectivemainboardslotandre-attachitusingthexationscrew.
10. Mounting additional fans / optimized airflow
1. Holdthefanagainsttherespectivebracketfromtheinside(e.g.inthesidepanel).
2.Attachthefantothefanbracketusingthecorrespondingmountingscrews.
Note:
During fan mounting make sure that (cool) air is taken in on the case’s front side/bottom and blown
out on its back side/top. The PC components with the highest heat development should be placed
directly within this airflow.
Legal disclaimer:
AsacontinuingpolicyofproductimprovementatSHARKOON,thedesignandspecicationsaresubject
tochangewithoutpriornotice.Nationalproductspecicationsmayvary.
Allrightsreservedespecially(alsoinextracts)fortranslation,reprinting,reproductionbycopyingor
othertechnicalmeans.Infringementswillleadtocompensation.
Allrightsreservedespeciallyincaseofassignationofpatentorutilitypatent.Meansofdeliveryand
technicalmodicationsreserved.
Disposalofyouroldproduct:
Yourproductisdesignedandmanufacturedwithhighqualitymaterialsandcomponents,whichcan
be recycled and reused.
Whenthiscrossed-outwheeledbinsymbolisattachedtoaproduct,itmeanstheproductiscoveredby
theEuropeanDirective2002/96/EC.
Please be informed about the local separate collection system for electrical and electronic products.
Please act according to your local rules and do not dispose of your old products with your normal
household waste. The correct disposal of your old product will help prevent potential negative
consequences to the environment and human health.
©SHARKOONTechnologies2011
www.sharkoon.com
13
/