Suzuki LT-Z250K6 2006 User manual

GROUP INDEX

GENERAL INFORMATION

1

PERIODIC MAINTENANCE

2

ENGINE

3

DRIVE TRAIN

4

FUEL SYSTEM

5

LUBRICATION SYSTEM

6

CHASSIS

7

ELECTRICAL SYSTEM

8

SERVICING INFORMATION

9

FOREWORD

This manual contains an introductory description on

the SUZUKI LT-Z250 and procedures for its inspec-

tion, service and overhaul of its main components.

Other information considered as generally known is

not included.

Read the GENERAL INFORMATION section to

familiarize yourself with the vehicle and its mainte-

nance. Use this section as well as other sections as

a guide for proper inspection and service.

This manual will help you know the vehicle better so

that you can assure your customers of fast and reli-

able service.



' COPYRIGHT SUZUKI MOTOR CORPORATION 2003

* This manual has been prepared on the basis

of the latest specifications at the time of publi-

cation. If modifications have been made since

then, differences may exist between the con-

tent of this manual and the actual vehicle.

* Illustrations in this manual are used to show

the basic principles of operation and work

procedures. They may not represent the

actual vehicle exactly in detail.

* This manual is written for persons who have

enough knowledge, skills and tools, including

special tools, for servicing SUZUKI vehicles.

If you do not have the proper knowledge and

tools, ask your authorized SUZUKI motorcy-

cle dealer to help you.

Inexperienced mechanics or mechanics

without the proper tools and equipment

may not be able to properly perform the

services described in this manual.

Improper repair may result in injury to the

mechanic and may render the vehicle

unsafe for the rider.

99500-42175-03E

PartShark.com

877-999-5686

03 ENGINE.book Page 105 Tuesday, February 28, 2006 3:03 PM

PartShark.com

877-999-5686

03 ENGINE.book Page 105 Tuesday, February 28, 2006 3:03 PM

SUPPLEMENTS

LT-Z250K5 (05-MODEL)

10

LT-Z250K6 (06-MODEL)

11

12

LT-Z250K7 (07-MODEL)

LT-Z250K8 (08-MODEL) 13

14

LT-Z250K9 (09-MODEL)

PartShark.com

877-999-5686

HOW TO USE THIS MANUAL

TO LOCATE WHAT YOU ARE LOOKING FOR:

1. The text of this manual is divided into sections.

2. The section titles are listed in the GROUP INDEX.

3. Holding the manual as shown at the right will allow you to find

the first page of the section easily.

4. The contents are listed on the first page of each section to

help you find the item and page you need.

COMPONENT PARTS AND WORK TO BE DONE

Under the name of each system or unit there is an exploded view which provides work instructions and other

service information (e.g.; tightening torque, lubricating points and locking agent points).

Example: Rear suspension

ITEM N•m kgf

-

m lb-ft

78 7.8 55.0

60 6.0 43.5

85 8.5 61.5

60 6.0 43.5

65 6.5 47.0

Rear shock absorber

Swingarm

Bearing

Rear shock absorber mounting nut (Upper)

Rear shock absorber mounting nut (Lower)

Swingarm pivot nut

Axle housing mounting nut (RH)

Axle housing bolt

Axle housing mounting nut (LH)

PartShark.com

877-999-5686

SYMBOL

Listed in the table below are the symbols indicating instructions and other information necessary for servic-

ing. The meaning of each symbol is also included in the table.

SYMBOL DEFINITION SYMBOL DEFINITION

Torque control required.

Data beside it indicates specified

torque.

Apply THREAD LOCK SUPER 1303.

99000-32030

Indicates service data.

Apply THREAD LOCK SUPER 1322.

99000-32110 (Except USA)

Apply oil. Use engine oil unless

otherwise specified.

Apply THREAD LOCK 1342.

99000-32050

Apply hypoid gear oil.

Apply THREAD LOCK SUPER 1360.

99000-32130

Apply molybdenum oil solution.

(mixture of engine oil and SUZUKl

MOLY PASTE in a ratio of 1 : 1)

Apply or use brake fluid.

Apply SUZUKI SUPER GREASE A.

99000-25030 (USA)

99000-25010 (Others)

Measure in voltage range.

Apply SUZUKI SILICONE GREASE.

99000-25100

Measure in resistance range.

Apply SUZUKI MOLY PASTE.

99000-25140

Measure in current range.

Apply WATER RESISTANCE GREASE.

99000-25160

Measure in diode test range.

Apply SUZUKI BOND 1207B

99104-31140 (USA)

99000-31140 (Others)

Measure in continuity test range.

Apply SUZUKI BOND 1215.

99000-31110 (Except USA)

Use special tool.

Apply SUZUKI BOND 1216B.

99000-31230

H/O

W

1216B

PartShark.com

877-999-5686



PartShark.com

877-999-5686

1

GENERAL INFORMATION 1-1

GENERAL INFORMATION

CONTENTS

WARNING/CAUTION/NOTE .........................................................................1- 2

GENERAL PRECAUTIONS ...........................................................................1- 2

SUZUKI LT-Z250K4 (2004-MODEL) .............................................................1- 4

SERIAL NUMBER LOCATION ......................................................................1- 4

FUEL AND OIL RECOMMENDATION ..........................................................1- 4

FUEL (FOR CANADA AND USA) ..........................................................1- 4

FUEL (FOR THE OTHER COUNTRIES) ................................................1- 4

ENGINE OIL (FOR USA) ........................................................................1- 5

ENGINE OIL (FOR THE OTHER COUNTRIES) ....................................1- 5

REAR DRIVE GEAR OIL .......................................................................1- 5

BRAKE FLUID ........................................................................................1- 5

BREAK-lN PROCEDURES ...........................................................................1- 5

INFORMATION LABELS ...............................................................................1- 6

SPECIFICATIONS .........................................................................................1- 7

DIMENSIONS AND DRY MASS ............................................................1- 7

ENGINE ..................................................................................................1- 7

DRIVE TRAIN .........................................................................................1- 7

CHASSIS ................................................................................................1- 8

ELECTRICAL .........................................................................................1- 8

CAPACITIES ..........................................................................................1- 8

COUNTRY AND AREA CODES ....................................................................1- 9

PartShark.com

877-999-5686

1-2 GENERAL INFORMATION

WARNING/CAUTION/NOTE

Please read this manual and follow its instructions carefully. To emphasize special information, the symbol

and the words WARNING, CAUTION and NOTE have special meanings. Pay special attention to the mes-

sages highlighted by these signal words.

!

Indicates a potential hazard that could result in death or injury.

"

Indicates a potential hazard that could result in vehicle damage.

NOTE:

Indicates special information to make maintenance easier or instructions clearer.

Please note, however, that the warnings and cautions contained in this manual cannot possibly cover all

potential hazards relating to the servicing, or lack of servicing, of the vehicle. In addition to the WARNINGS

and CAUTIONS stated, you must use good judgement and basic mechanical safety principles. If you are

unsure about how to perform a particular service operation, ask a more experienced mechanic for advice.

GENERAL PRECAUTIONS

!

* Proper service and repair procedures are important for the safety of the service mechanic and

the safety and reliability of the vehicle.

* When two or more persons work together, pay attention to the safety of each other.

* When it is necessary to run the engine indoors, make sure that exhaust gas is forced out-

doors.

* When handling toxic or flammable materials, make sure that the area you work in is well ven-

tilated and that you follow all of the manufacturers instructions.

* Never use gasoline as a cleaning solvent.

* To avoid getting burned, do not touch the engine, engine oil, radiator and exhaust system

until they have cooled.

* After servicing the fuel, oil, exhaust or brake systems, check all of the lines, and fittings

related to the system for leaks.

PartShark.com

877-999-5686

GENERAL INFORMATION 1-3

"

* If parts replacement is necessary, replace the parts with Suzuki Genuine Parts or their equiva-

lent.

* When removing parts that are to be reused, keep them arranged in an orderly manner so that

they may be reinstalled in the proper order and orientation.

* Be sure to use special tools when instructed.

* Make sure that all parts used in reassembly are clean. Lubricate them when specified.

* Use the specified lubricant, bond or sealant.

* When removing the battery, disconnect the negative cable first and then the positive cable.

* When reconnecting the battery, connect the positive cable first and then the negative cable,

and replace the terminal cover on the positive terminal.

* When performing service to electrical parts, if the service procedures not require use of bat-

tery power, disconnect the negative cable the battery.

* When tightening the cylinder head and case bolts and nuts, tighten the larger sizes first.

Always tighten the bolts and nuts diagonally from the inside toward outside and to the speci-

fied tightening torque.

* Whenever you remove oil seals, gaskets, packing, O-rings, locking washers, self-locking

nuts, cotter pins, circlips and certain other parts as specified, be sure to replace them with

new ones. Also, before installing these new parts, be sure to remove any left over material

from the mating surfaces.

* Never reuse a circlip. When installing a new circlip, take care not to expand the end gap larger

than required to slip the circlip over the shaft. After installing a circlip, always ensure that it is

completely seated in its groove and securely fitted.

* Use a torque wrench to tighten fasteners to the specified torque. Wipe off grease and oil if a

thread is smeared with them.

* After reassembling, check parts for tightness and proper operation.

* To protect the environment, do not unlawfully dispose of used motor oil, all other fluids, bat-

teries and tires.

* To protect the earths natural resources, properly dispose of used vehicles and parts.

PartShark.com

877-999-5686

1-4 GENERAL INFORMATION

SUZUKI LT-Z250K4 (2004-MODEL)

RIGHT SIDE LEFT SIDE

* Difference between photographs and actual vehicles depends on the markets.

SERIAL NUMBER LOCATION

The frame serial number or V.I.N. (Vehicle Identification Number)

1 is stamped on the left side of the rear

frame pipe. The engine serial number

2 is located on the left side of the crankcase. These numbers are

required especially for registering the machine and ordering spare parts.

FUEL AND OIL RECOMMENDATION

FUEL (FOR CANADA AND USA)

 Use only unleaded gasoline of at least 87 pump octane (R/2 + M/2) method or 91 octane or higher rated

by the Research Method.

 SUZUKI recommends that customers use alcohol-free unleaded gasoline whenever possible.

 Use of blended gasoline containing MTBE (Methyl Tertiary Butyl Ether) is permitted.

 Use of blended gasoline/alcohol fuel is permitted, provided that the fuel contains not more than 10% etha-

nol. Gasoline/alcohol fuel may contain up to 5% methanol if appropriate cosolvents and corrosion inhibi-

tors are present in it.

 If the performance of the vehicle is unsatisfactory while using blended gasoline/alcohol fuel, you should

switch to alcohol-free unleaded gasoline.

 Failure to follow these guidelines could possibly void applicable warranty coverage. Check with your fuel

supplier to make sure that the fuel you intend to use meets the requirements listed above.

FUEL (FOR THE OTHER COUNTRIES)

Use unleaded gasoline that is graded 91 octane or higher by the Research Method.

PartShark.com

877-999-5686

GENERAL INFORMATION 1-5

ENGINE OIL (FOR USA)

SUZUKI recommends the use of SUZUKI PERFORMANCE 4

MOTOR OIL or oils that meet API service classifications SF or

SG and that have a viscosity rating of SAE 10W-40. If engine oil

with a rating of SAE 10W-40 is not available, select an alter-

native according to the chart.

ENGINE OIL (FOR THE OTHER COUNTRIES)

Use a premium quality 4-stroke motor oil to ensure longer ser-

vice life of the vehicles. Use only oils that meet API service clas-

sifications SF or SG and that have a viscosity rating of SAE

10W-40. If engine oil with a rating of SAE 10W-40 is not avail-

able, select an alternative according to the chart.

REAR DRIVE GEAR OIL

Use hypoid gear oil that meets the API service classification GL-5 and is rated SAE #90. Use a hypoid gear

oil with a rating of SAE #80 if the vehicle is operated where the ambient temperature is below 0 C (32 F).

BRAKE FLUID

# Specification and classification: DOT 4

!

BREAK-lN PROCEDURES

During manufacturing only the best possible materials are used and all machined parts are finished to a very

high standard. It is still necessary to allow the moving parts to BREAK-lN before subjecting the engine to

maximum stresses. The future performance and reliability of the engine depends on the care and restraint

exercised during its early life. Refer to the following break-in engine speed recommendations:

 Keep to these break-in engine speed limits.

Break-in engine speeds

Initial 10 hours: Less than ‰ throttle

 After the engine has been operated for 10 hours the engine to full throttle operation, for short periods of

time.

This vehicle uses a glycol-based brake fluid. Do not use or mix different types of brake fluid

such as silicone-based and petroleum-based fluids for refilling the system, otherwise serious

damage will result to the brake system.

Never use any brake fluid taken from old, used or unsealed containers.

Never reuse brake fluid left over from the last servicing or which has been stored for a long

period of time.

PartShark.com

877-999-5686

1-6 GENERAL INFORMATION

INFORMATION LABELS

* E-28: Fuel caution label enclosed.

E: English

F: French

A: Attached

No. LABEL or PLATE NAME

APPLIED SPECIFICATION

E-19 E-28 E-33

1 Certification plate

E AA

2 Information label

E A

3 Gearshift pattern label

E A

4 Gearshift pattern label

E/

F A

5 Tire air pressure label

E AAA

6 Tire air pressure label and warning no-passenger label

F A

7 General warning label

E AAA

8 General warning label

F A

9 Warning no-passenger label

E AAA

0 Age, 16 Iabel

E AAA

A Age, 16 Iabel

F A

B Manual notice label

E A

C Gearshift label

E AAA

D Gearshift label

F A

E ICES Canada label

E/

F

F Compliance label

E A

G EC approval mark A A

Front of left side frame

Left side frame

PartShark.com

877-999-5686

GENERAL INFORMATION 1-7

SPECIFICATIONS

DIMENSIONS AND DRY MASS

Overall length...................................................... 1 720 mm (67.7 in)

Overall width ....................................................... 1 070 mm (42.1 in)

Overall height...................................................... 1 090 mm (42.9 in)

Wheelbase.......................................................... 1 135 mm (44.7 in)

Front track........................................................... 830 mm (32.7 in)

Rear track............................................................ 810 mm (31.9 in)

Ground clearance................................................ 230 mm ( 9.1 in)

Seat height.......................................................... 810 mm (31.9 in)

Dry mass............................................................. 166 kg (365 lbs)

ENGINE

Type.................................................................... Four-stroke, air-cooled, OHC

Number of cylinders ............................................ 1

Bore..................................................................... 66.0 mm (2.598 in)

Stroke.................................................................. 72.0 mm (2.835 in)

Displacement ...................................................... 246 cm‡ (15.0 cu. in)

Compression ratio............................................... 9.2 : 1

Carburetor........................................................... MIKUNI BSR29, single

Air cleaner........................................................... Polyurethane foam element

Starter system..................................................... Electric

Lubrication system .............................................. Wet sump

Idle speed............................................................ 1 500 – 100 r/min

DRIVE TRAIN

Clutch.................................................................. Wet multi-plate, automatic, centrifugal type

Transmission....................................................... 5-forward and 1-reverse

Gearshift pattern, forward ................................... All up, foot lever operated

reverse ................................... Foot/hand operated

Primary reduction ratio........................................ 3.047 (64/21)

Secondary reduction ratio ................................... 1.133 (17/15)

Gear ratios, 1st ................................................... 3.083 (37/12)

2nd.................................................. 1.933 (29/15)

3rd................................................... 1.388 (25/18)

4th................................................... 1.095 (23/21)

5th................................................... 0.913 (21/23)

Reverse........................................... 2.833 (34/12)

Final reduction ratio............................................. 3.200 (32/10)

PartShark.com

877-999-5686

1-8 GENERAL INFORMATION

CHASSIS

Front suspension .................................................Independent, double wishbone, coil spring, oil damped

Rear suspension..................................................Swingarm type, coil spring, oil damped

Front wheel travel ................................................160 mm (6.3 in)

Rear wheel travel.................................................170 mm (6.7 in)

Caster ..................................................................7 40......... 1G

Trail......................................................................33 mm (1.30 in)........1G

Toe-in...................................................................5 mm (0.20 in)..........1G

Steering angle......................................................45

Turning radius......................................................2.7 m (8.9 ft)

Front brake...........................................................Disc brake, twin

Rear brake...........................................................Drum brake

Front tire size.......................................................AT22  7-10 ✩✩, tubeless

Rear tire size........................................................AT20  10-9 ✩, tubeless

ELECTRICAL

lgnition type..........................................................Electronic ignition (CDl)

lgnition timing.......................................................5 B.T.D.C. at 1 500 rpm

Spark plug............................................................NGK DR7EA or DENSO X22ESR-U

Battery..................................................................12 V 28.8 kC (8 Ah)/10 HR

Generator.............................................................Three-phase A.C. generator

Main fuse .............................................................20/15 A

Headlight..............................................................12 V 40/40 W

Brake light/Taillight...............................................12 V 21/5 W

Neutral indicator light...........................................12 V 3 W

Reverse indicator light .........................................12 V 3 W

CAPACITIES

Fuel tank, including reserve ...............................10.6 L (2.8/2.3 US/Imp gal)

reserve .............................................. 2.6 L (0.7/0.6 US/Imp gal)

Engine oil, oil change..........................................2 200 ml (2.3/1.9 US/Imp qt)

filter change.......................................2 300 ml (2.4/2.0 US/Imp qt)

overhaul.............................................2 500 ml (2.6/2.2 US/Imp qt)

Final gear oil, oil change...................................... 190 ml (6.4/6.7 US/Imp oz)

NOTE:

* These specifications are subject to change without notice.

PartShark.com

877-999-5686

GENERAL INFORMATION 1-9

COUNTRY AND AREA CODES

The following codes stand for the applicable countries and areas:

CODE COUNTRY OR AREA

E-19

E-28

E-33

EU

Canada

USA and California

PartShark.com

877-999-5686



PartShark.com

877-999-5686

2

6

PERIODIC MAINTENANCE 2-1

CONTENTS

PERIODIC MAINTENANCE

PERIODIC MAINTENANCE SCHEDULE .......................................................2- 2

PERIODIC MAINTENANCE CHART .....................................................2- 2

MAINTENANCE AND TUNE-UP PROCEDURES ..........................................2- 3

AIR CLEANER .......................................................................................2- 3

EXHAUST PIPE NUTS AND MUFFLER BOLTS ...................................2- 5

VALVE CLEARANCE ............................................................................2- 5

SPARK PLUG ........................................................................................2- 7

FUEL LINE .............................................................................................2- 8

THROTTLE CABLE PLAY .....................................................................2- 9

ENGINE IDLE SPEED ............................................................................2- 9

ENGINE OIL AND OIL FILTER ..............................................................2-10

FINAL GEAR OIL ...................................................................................2-11

SPARK ARRESTER ...............................................................................2-12

CLUTCH .................................................................................................2-13

BRAKES .................................................................................................2-14

BRAKE FLUID ........................................................................................2-15

BRAKE HOSE ........................................................................................2-17

TIRES .....................................................................................................2-17

STEERING ..............................................................................................2-19

SUSPENSIONS ......................................................................................2-19

CHASSIS BOLTS AND NUTS ...............................................................2-20

GENERAL LUBRICATION .....................................................................2-23

COMPRESSION PRESSURE CHECK ............................................................2-24

COMPRESSION TEST PROCEDURE ...................................................2-24

OIL PRESSURE CHECK .................................................................................2-25

OIL PRESSURE TEST PROCEDURE ...................................................2-25

INITIAL ENGAGEMENT AND CLUTCH LOCK-UP INSPECTION .................2-26

INITIAL ENGAGEMENT INSPECTION ..................................................2-26

CLUTCH LOCK-UP INSPECTION .........................................................2-26

PartShark.com

877-999-5686

2-2 PERIODIC MAINTENANCE

PERIODIC MAINTENANCE SCHEDULE

The chart below lists the recommended intervals for all the required periodic service work necessary to keep

the vehicle operating at peak performance and economy.

NOTE:

More frequent servicing may be performed on vehicles that are use under severe conditions.

PERIODIC MAINTENANCE CHART

I = Inspect and adjust, clean, lubricate or replace as necessary

R = Replace

T = Tighten

C = Clean

L = Lubricate

Interval

Initial Every Every

Item 1 month 3 months 6 months

Air cleaner  C C

Exhaust pipe nuts and muffler bolts T T T

Valve clearance I I I

Spark plug

 I

Replace every 18 months.

Spark arrester   C

Engine idle speed I I I

Throttle cable play I I I

Fuel line

I I

Replace every 4 years.

Engine oil and oil filter R  R

Final gear oil

 I

Replace every 2 years.

Clutch   I

Brakes I I I

Brake fluid

I I

Replace every 2 years.

Brake hose

 I

Replace every 4 years.

Tires  I I

Suspensions   I

Steering I I I

Chassis bolts and nuts T T T

General lubrications L L L

PartShark.com

877-999-5686

PERIODIC MAINTENANCE 2-3

MAINTENANCE AND TUNE-UP PROCEDURES

This section describes the servicing procedures for each item

mentioned in the Periodic Maintenance chart.

AIR CLEANER

If the air cleaner is clogged with dust, intake resistance will be

increased, with a resultant decrease in power output and an

increase in fuel consumption. Check and clean the air cleaner

element in the following manner:

 Remove the seat. (!7-5)

 Disconnect the air vent hose

1.

 Remove the air cleaner case cover

2.

NOTE:

Be careful not to drop the O-ring into the air cleaner box that is

attached to the air cleaner case cover.

 Remove the air cleaner element

3.

 Separate the polyurethane foam element

4, element frame

5 and element holder

6.

Clean every 3 months.

PartShark.com

877-999-5686

2-4 PERIODIC MAINTENANCE

 Fill a wash pan of a proper size with a non-flammable clean-

ing solvent. Immerse the air cleaner element in the cleaning

solvent and wash it.

 Press the air cleaner element between the palms of both

hands to remove the excess solvent: do not twist or wring the

element, or it will tear.

 Immerse the element in motor oil, and then squeeze out the

excess oil leaving the element slightly wet.

A Non-flammable cleaning solvent

B Motor oil SAE #30 or SAE 10W-40

"

 Remove the drain cap

7 of the air cleaner box to allow any

water to drain out.

* Inspect the air cleaner element for tears. A torn ele-

ment must be replaced.

* If driving under dusty conditions, clean the air

cleaner element more frequently. The surest way to

accelerate engine wear is to operate the engine with-

out the element or with torn element. Make sure that

the air cleaner element is in good condition at all

times. Life of the engine depends largely on this

component!

PartShark.com

877-999-5686

Page is loading ...

Suzuki LT-Z250K6 2006, 250, LT-Z250, LT-Z250K5 2005, LT-Z250K7 2007, LT-Z250K8 2008, LT-Z250K9 2009 User manual

Related papers

Other documents