DV3121
DVD Player
IMPORTANT!
USER MANUAL
WARRANTY REGISTRATION
Please read this warranty card.
Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.
Warranty Terms & Conditions
1. TEAC warrants to the original retail purchaser only, that this product is free from defects in material and
workmanship under normal domestic use and authorises free service during the warranty period at any TEAC
Authorised Service Centre only. TEAC warranty only applies to products purchased, used and serviced in
Australia.
2. Subject to the terms herein, this warranty effectively covers the equipment as specified in the Warranty Periods
Table below from the date of purchase.
TEAC PRODUCT
WARRANTY PERIOD
Plasma TV 106 cm and above 1 Year (In-Home Service Available)
LCD Televisions 59cm and above 1 Year (In-Home Service Available)
Televisions – 59cm and above 1 Year (In-Home Service Available)
All Televisions under 59 cm 1 Year (No In-Home Service)
Digital Set Top Boxes & Module 1 Year (No In-Home Service)
VCR 1 Year (No In-Home Service)
DVD & Module 1 Year (No In-Home Service)
DVD Recorder & PVR Module 1 Year (No In-Home Service)
Audio Systems 1 Year (No In-Home Service)
3. In home service will only be provided as part of this warranty if all the following conditions are met;
a) The product as indicated in the Warranty Period Table.
b) The product is within the warranty period.
c) The product is located within the normal service area of the local TEAC Authorised Service Centre.
In any other situation or circumstance, where an in home service call is made, a service fee will be charged by the
Service Provider including a travel fee if outside normal service area.
If TEAC determines that the product is not repairable on site, TEAC can complete the repair by taking the product
to a TEAC Authorised Service Centre.
Where in-home service is not available, the purchaser is required to send the product to the nearest TEAC
Authorised Service Centre for repair. In this event, a copy of this warranty card and a copy of your receipt of
purchase must be enclosed to be a valid warranty. Such equipment or part must be sent freight prepaid to your
nearest TEAC Authorised Service Centre. After the repair, the product will be available for collection by or return to
the purchaser at purchaser’s cost. The warranty does not cover freight or insurance. In all cases of transit damage or
lost, a claim must be filed against the carrier by the purchaser, even if shipment is arranged by TEAC. TEAC in-
home service may also be available at a fee upon request.
4. Accessories, Remote, including power adaptors, AV box, TV tuners, etc, are warranted to be defect free for 1 year.
5. Replacement of spare parts under normal usage; except cabinet, front panel, knob, removable accessories, battery,
consumable, AC cord, connecting cord and other accessories, are warranted as specified in Warranty Periods Table,
and will be repaired or replaced at the sole judgement of TEAC.
6. The warranties hereby conferred do not extend to, and exclude, any cost associated with the installation, de-
installation or re-installation of a product (be it in-home or otherwise), including costs related to the mounting,
demounting or remounting of any screen, (and any other ancillary activities), delivery, handling, freighting,
transportation or insurance of the product or any part thereof or replacement of and do not extend to, and exclude,
any damage or loss occurring by reason of, during, associated with, or related to such installation, de-installation,
re-installation or transit.
7. Normal customer maintenance as described in the owner’s manual is not covered by this warranty (such as cleaning
VCR heads etc.)
8. Service will be provided only during normal business hours and under safety conditions and circumstances.
9. This warranty does not apply to equipment showing abuse, damage or that it may have been tampered with, altered
or repaired outside any TEAC Authorised Service Centre. If so, the warranty will be void.
*Your nearest Authorised TEAC Service Centre is listed in your Owners Manual
10. No one is authorised to assume any liability on behalf of TEAC or impose any obligation on it, in connection with
the sale of any equipment other than as stated in this warranty and outlined above.
11. In no event will TEAC be responsible or liable for indirect or consequential damages from interrupted operations or
other causes.
12. Warranty is not transferable to any subsequent purchaser if the product is sold during the warranty period,
* Extended promotional warranty may apply to certain products (for more info please contact: [email protected])
In home service administration fee is applied after 1
st
year of warranty.
WARRANTY PROCEDURES
Please keep this information for your own records.
Please refer to the owner’s manual to ensure that you have followed the correct installation and operating procedures.
1. Read owner’s manual carefully
2. If you require Warranty Service, please contact the TEAC Authorised Service Centre
3. Please have your purchase receipt as your proof of purchase and the following details completed for a valid
Warranty.
Owner’s Name
Owner’s Address
Postcode
Model Name/No. Serial No.
Dealer’s Name
Dealer’s Address
Postcode
4. Please ensure that your product is packed appropriately upon return to the service centre.
If you have any other queries regarding service or warranty please contact the TEAC Customer Care Centre below:
www.teac.com.au
1800 656 700
Safety Precautions
Important Safety Instructions
Caution
Features
Front Panel and Rear Panel Illustration
Remote Control
Introduction
2
3
5
6
7
8
TV set Connecting
Digital Audio Connecting
Connections
9
10
Advanced Features
21
Others
Troubleshooting
29
Specifications
11
27
Content
Mode and Features Setup
Remote Control Operation
1
Kodak Picture CD Playback
28
Remote Control Preparation
30
2
AVIS
RISQUE CHOC ELECTRIQUE NE
PAS OUVRIR
3
4
5
5
6
Features
Introduction
Full compatibility with DVD, CD, Kodak Picture CD, CD-R and CD-RW (finalized )
Screensaver
S-video, composite video and component (Y, Pb, Pr) video outputs
Coaxial digital audio output
Disc formats supported by this player:
Dolby Digital
KODAK picture CD
DVD video
9
Multi-angle
32
Subtitle choices
8
Audio choices
16:9
LB
TV Aspect Ratio modes
This product incorporates copyright protection technology that is protected by method claims of
certain U.S.patents and other intellectual property rights owned by Macrovision Corporation and other
rights owners.Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intendedfor home and other limited viewing uses only unless otherwise authorized
by Macrovision Corporation.Reverse engineering or disassembly is prohibited.
The product complies with the KODAK Picture CD format and will display KODAK Picture CDs. The "KODAK
Picture CD Compatible" logo is a trademark of Eastman Kodak Company and is used with permission.
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of
Dolby Laboratories. Confidential Unpublished Works.
c
1992-1997 Dolby Laboratories, Inc. All rights reserved.
Multiple playback modes: Program, Search
7
1
2
3
4
5
7
8
9
1
2
3
4
5
6
7
8
9
POWER POWER
VFD SCREENVFD SCREEN
SENSORSENSOR
CABIN DOORCABIN DOOR
OPEN/CLOSE BUTTONOPEN/CLOSE BUTTON
PLAY/PAUSE BUTTONPLAY/PAUSE BUTTON
STOP BUTTONSTOP BUTTON
PREV BUTTONPREV BUTTON
NEXT BUTTONNEXT BUTTON
6
100V-240V~ 50/60Hz
1
2
3
4
5
1
2
3
4
5
2.0 CH Audio output
(L, R )
2.0 CH Audio output
(L, R )
COMPOSITE VIDEO output jack COMPOSITE VIDEO output jack
S-VIDEO output jackS-VIDEO output jack
Component Video output
(Y, Pb, Pr)
Component Video output
(Y, Pb, Pr)
Digital Audio COAXIAL output jackDigital Audio COAXIAL output jack
Introduction
Remote Control
Remote Control
8
DVD DISC DVD DISC
Mp3 DISC Mp3 DISC
PLAY/PAUSEPLAY/PAUSE
PLAY TIMEPLAY TIME
DTSDTS
SVCD/VCD/CD DISCSVCD/VCD/CD DISC
22
DOLBY DIGITALDOLBY DIGITAL
VFD DISPLAY
SVCDSVCD
dtsdts
DVDDVD
3.In order to operate any of the remote functions, you must first press the Power button on
the DVD player.
STANDBY
TITLE
SUBTITLE
LANGUAGE
ANGLE
TIME
DISPLAY
PBC
STOP
PLAY
REV
FWD
NEXT
PREV
VOL+
RETURN
VOL-
RANDOM
0-10+ NUMBER KEY
OPEN/CLOSE
SETUP
MOVE( )
SLOW
ZOOM
PAUSE
MENU
34
35
36
37
ENTER
GOTO
MUTE
MODE
PSCAN/NORMAL
A-B REPEAT
REPEAT
PROG
P/N
DIGEST
L/R
3434
3535
3636
3737
STANDBY
MUTE
9
Y Pb Pr
Connections
10
Connecting to an AV Amplifier with Digital Audio Input
BASS
TREBLE
ECHO
DOWN UP
VOLUME
INPUT SELECTOR
MUTE
KARAOKE
CHANNEL
TEST
MODE
3 STEREO
PRO LOGIC
BYPASS
EXCITE
POWER
MIC
2
1
1
MIC VOL
2
MIC
Amplifier
Coaxial
Coaxial cableCoaxial cable
Notes
1. The DVD audio setting output need to be settled for the
SPDIF/PCM or SPDIF/RAM mode. ( Refer to P.11 )
2. After connecting Video signal to the television, you can see
the image by selecting the video input channels. If connected to
the AVI , TV need to switch to the AVI . Please refer to
the TV set connecting.
3. The Amplifier will output voice after audio receive Coaxial signal.
It requires the Amplifier to select the Coaxial input.
Notes
1. The DVD audio setting output need to be settled for the
SPDIF/PCM or SPDIF/RAM mode. ( Refer to P.11 )
2. After connecting Video signal to the television, you can see
the image by selecting the video input channels. If connected to
the AVI , TV need to switch to the AVI . Please refer to
the TV set connecting.
3. The Amplifier will output voice after audio receive Coaxial signal.
It requires the Amplifier to select the Coaxial input.
11
Advanced Features
VIDEO SETUPVIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
1. General Steps of setup menu
A) Press the setup button, the main setup menu appears.A) Press the setup button, the main setup menu appears.
B) Press the Left and Right arrow buttons to highlight the icon of the desired
page, then press the Down or Right arrow button to activate that page. For
example, if you want to setup the video page, press Right to highlight the
video icon, the video page will be displayed on the screen.
B) Press the Left and Right arrow buttons to highlight the icon of the desired
page, then press the Down or Right arrow button to activate that page. For
example, if you want to setup the video page, press Right to highlight the
video icon, the video page will be displayed on the screen.
C) Press the Down arrow button to highlight the desired option. Press Enter
or press Right to select. The choices of that option appear on the right. For
example, press the Down arrow button to highlight the BRIGHTNESS
option, the press Enter to select, the brightness choices appear on the right.
C) Press the Down arrow button to highlight the desired option. Press Enter
or press Right to select. The choices of that option appear on the right. For
example, press the Down arrow button to highlight the BRIGHTNESS
option, the press Enter to select, the brightness choices appear on the right.
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
DEFAULT
EXIT SETUP
12
2. Setup Items Introduction 2. Setup Items Introduction
2.1 SYSTEM SETUP2.1 SYSTEM SETUP
The system setup options are illustrated as below:The system setup options are illustrated as below:
Advanced Features
A)Press the Arrow buttons to highlight the Exit Setup option,then press
Enter or Setup again to exit Setup Menu.
A)Press the Arrow buttons to highlight the Exit Setup option,then press
Enter or Setup again to exit Setup Menu.
VIDEO SETUPVIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
The SCREEN SAVER function is automatically and always on; when the player is in
STOP, after few minutes in Open or No disc state, it will appear a DVD logo moving
around the screen.
The SCREEN SAVER function is automatically and always on; when the player is in
STOP, after few minutes in Open or No disc state, it will appear a DVD logo moving
around the screen.
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
DEFAULT
EXIT SETUP
NTSC
PAL
AUTO
NTSC
PAL
AUTO
According to the Color System of the TV, you can choose the TV System.According to the Color System of the TV, you can choose the TV System.
2.1.1 TV SYSTEM2.1.1 TV SYSTEM
13
Advanced Features
INTERLACE-YUV
P-SCAN YPBPR
S-VIDEO
INTERLACE-YUV
P-SCAN YPBPR
S-VIDEO
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
DEFAULT
EXIT SETUP
TV-RGB: Choose this option when the player is connected to the TV with scart cable
or composite video cables.
S-VIDEO: Choose this option when the player is connected to the TV with video S-VIDEO
Cables.
Choose P-scan Y,Pb,Pr only when the player is connected to a TV with progressive scan
with Y, Pb, Pr cables.
TV-RGB: Choose this option when the player is connected to the TV with scart cable
or composite video cables.
S-VIDEO: Choose this option when the player is connected to the TV with video S-VIDEO
Cables.
Choose P-scan Y,Pb,Pr only when the player is connected to a TV with progressive scan
with Y, Pb, Pr cables.
According to the setting of the output jack of TV set, you can choose
INTERLACE-YUV,P-SCAN Y,Pb,Pr, S-VIDEO.
According to the setting of the output jack of TV set, you can choose
INTERLACE-YUV,P-SCAN Y,Pb,Pr, S-VIDEO.
2.1.2 VIDEO2.1.2 VIDEO
2.1.3 TV TYPE2.1.3 TV TYPE
According to the TV type, you can choose 16:9,4:3LB or 4:3PS.
16:9 : The picture fills the screen of a wide screen TV.
4:3 PS : Pan and Scan, the image is cut in order to fit the whole screen.
4:3 LB: Letter box, two black bands will appear on the upper and lower part
of the screen.
According to the TV type, you can choose 16:9,4:3LB or 4:3PS.
16:9 : The picture fills the screen of a wide screen TV.
4:3 PS : Pan and Scan, the image is cut in order to fit the whole screen.
4:3 LB: Letter box, two black bands will appear on the upper and lower part
of the screen.
4£º3PS
4£º3LB
16£º9
4£º3PS
4£º3LB
16 £º9
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
DEFAULT
EXIT SETUP
14
Advanced Features
ENGLISH
SLOVAK
CZECH
POLISH
ENGLISH
SLOVAK
CZECH
POLISH
LANGUAGE SETUPLANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
2.2.2 AUDIO LANG2.2.2 AUDIO LANG
Highlight the AUDIO LANG option, and press the Arrow buttons to choose the
audio language you prefer. Press Enter to confirm. If the disc you are playing
has that language, it will display that language.
Highlight the AUDIO LANG option, and press the Arrow buttons to choose the
audio language you prefer. Press Enter to confirm. If the disc you are playing
has that language, it will display that language.
2.2 LANGUAGE SETUP2.2 LANGUAGE SETUP
2.2.1 OSD LANGUAGE2.2.1 OSD LANGUAGE
Highlight the OSD LANGUAGE option, and press the Arrow buttons to choose
the OSD language you prefer. Press Enter to confirm, then the language will be
set as OSD language.
Highlight the OSD LANGUAGE option, and press the Arrow buttons to choose
the OSD language you prefer. Press Enter to confirm, then the language will be
set as OSD language.
The language setup options are illustrated as below:The language setup options are illustrated as below:
RESTORERESTORE
SYSTEM SETUPSYSTEM SETUP
TV SYSTEM
VIDEO
TV TYPE
DEFAULT
EXIT SETUP
2.1.4 DEFAULT2.1.4 DEFAULT
The DEFAULT setup options are RESTORE factory setup. The DEFAULT setup options are RESTORE factory setup.
When your unit does not work properly, It may probably result from some wrong
settings. Please try the Restore Factory Setting function to see if the unit can
restore to its normal working status.
When your unit does not work properly, It may probably result from some wrong
settings. Please try the Restore Factory Setting function to see if the unit can
restore to its normal working status.
15
Advanced Features
LANGUAGE SETUPLANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
Notes:If your preferred language is not available, the disc s default language
will be played.
Notes:If your preferred language is not available, the disc s default language
will be played.
,
LANGUAGE SETUPLANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
2.2.4 MENU LANG2.2.4 MENU LANG
Highlight the MENU LANG option, and press the Arrow buttons to
choose the menu language you prefer. Press Enter to confirm. If the
disc you are playing has that Language, it will display the menu in the
language.
Highlight the MENU LANG option, and press the Arrow buttons to
choose the menu language you prefer. Press Enter to confirm. If the
disc you are playing has that Language, it will display the menu in the
language.
ENGLISH
GERMAN
SPANISH
FRENCH
SLOV AK
CZECH
POLISH
LATIN
ENGLISH
GERMAN
SPANISH
FRENCH
SLOVAK
CZECH
POLISH
LATIN
ENGLISH
GERMAN
SPANISH
FRENCH
SLOVAK
CZECH
POLISH
OFF
ENGLISH
GERMAN
SPANISH
FRENCH
SLOVAK
CZECH
POLISH
OFF
Highlight the SUBTITLE LANG option, and press the Arrow buttons
to choose the subtitle language you prefer. Press Enter to confirm.
If the disc you are playing has that language, it will display subtitles
in that language.
Highlight the SUBTITLE LANG option, and press the Arrow buttons
to choose the subtitle language you prefer. Press Enter to confirm.
If the disc you are playing has that language, it will display subtitles
in that language.
2.2.3 SUBTITLE LANG2.2.3 SUBTITLE LANG
LANGUAGE SETUPLANGUAGE SETUP
OSD LANGUAGE
AUDIO LANG
SUBTITLE LANG
MENU LANG
EXIT SETUP
ENGLISH
GERMAN
SPANISH
FRENCH
SLOVAK
CZECH
POLISH
LATIN
ENGLISH
GERMAN
SPANISH
FRENCH
SLOVAK
CZECH
POLISH
LATIN
16
Advanced Features
2.4 VIDEO SETUP2.4 VIDEO SETUP
The video setup options are illustrated as below:The video setup options are illustrated as below:
VIDEO SETUPVIDEO SETUP
BRIGHTNESS
CONTRAST
HUE
SATURATION
SHARPNESS
EXIT SETUP
SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
SPDIF/OFF
SPDIF/RAW
SPDIF/PCM
AUDIO SETUPAUDIO SETUP
AUDIO OUT
EXIT SETUP
Highlight the AUDIO OUT option, and press the Arrow buttons to
choose the audio output mode you prefer. Press Enter to confirm;
There are 3 optional audio output modes: SPDIF/OFF, SPDIF /
RAW, and SPDIF/ PCM.
Highlight the AUDIO OUT option, and press the Arrow buttons to
choose the audio output mode you prefer. Press Enter to confirm;
There are 3 optional audio output modes: SPDIF/OFF, SPDIF /
RAW, and SPDIF/ PCM.
2.3.1 AUDIO OUT2.3.1 AUDIO OUT
SPDIF/OFF: Digital audio output off.
SPDIF/RAW: When the player is connected to an amplifier through the coaxial
cable.
SPDIF/PCM: When the player is connected to a 2 channels digital stereo amplifier.
SPDIF/OFF: Digital audio output off.
SPDIF/RAW: When the player is connected to an amplifier through the coaxial
cable.
SPDIF/PCM: When the player is connected to a 2 channels digital stereo amplifier.
2.3 AUDIO SETUP2.3 AUDIO SETUP
The audio setup options are illustrated as below:The audio setup options are illustrated as below:
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
