FREEWAY DVD-2685 User manual

Category
Car media receivers
Type
User manual
DVD-2685
User s Manual
http://www.freewaychina-na.com
FREEWAY ELECTRONICS CO.,LTD.
Add: NO.9 Industrial District, Shuibei, Huizhou City, Guangdong Province,P.R.C.
TEL: 86-752-2828488
Fax: 86-752-2828480
FOLD DOWN DETACHABLE PANEL
3 INCH TFT WIDE DISPLAY
USB FUNCTION
16:9 OR 4:3 WIDE DISPLAY
NTSC&PAL COMPATIBLE
PICTURE CONTROL: BRIGHTNESS/CONTRAST/CHROMA/HUE
SUPPORT DVD/DVD-R/VCD/CD/CD-R/CD-RW/MP3/WMA/JPG
REPEAT/PROGRAM/RANDOM
AM/FM STEREO RADIO SYSTEM
30 PRESET STATIONS
AUTO MEMORY STORE/PRESET SCAN
PRESET EQ MODE
CLOCK DISPLAY
SUBWOOFER OUTPUT
AUX INPUT FUNCTION
4 CHANNELS RCA OUTPUT
HIGH POWER OUTPUT
CARD SIZE FULL FUNCTION REMOTE CONTROL
DVD-2685
DVD/VCD/CD/MP3 PLAYER
& AM/FM tuner
00
2
Contents
DVD
1
Before You Start
Installation
Common Operations
Important Safeguards 4
About this manual 4
Precautions 5
Maintenance 6
Location & function of the controls 7
Remote control 9
Specifications 11
Wiring Connections
Installation
Detach the Unit
Cleaning the Connector
12
13
15
16
17
17
17
17
17
18
18
Clear
18
18
18
18
Reset the Unit
Turning the Unit On/Off
Volume Control
Setting the Sound Characteristics
EQ Setting
Turning Loudness On/Off
Mute Function
Mode Selector
Display Mode
Infrared Sensor
AUX In
18
Force Disc Out 18
Basic Operation of DVD
Playing the Previous/Next Track
Playing the Track F.F/F.REW
Stop the Playback
Slow Motion Playback
System Button
Increase Picture Size
Pause the Playback
Number Buttons
Repeat Playing
On Screen Display
Setting the Playing Time
Changing the Viewing Angle
Changing Audio Language
Changing the Subtitle Language
Selecting Different Menu/Title
Eject a Disc
Set Up Menu
23
23
23
23
23
23
23
23
24
24
24
24
24
25
25
25
25
25-31
6
VCD/CD/MP3/MPEG-4/USB
Playing Discs/USB
Playing the Previous/Next Track
Playing the Track F.F/F.REW
Playing Tracks in Random Order
Stop the Playback
Pause the Playback
Changing Audio Language(Multi-audio)
File Selector
Slow Motion Playback
Picture Sizes
On-Screen Display
32
32
32
Repeat Playing 32
32
32
33
33
33
33
33
33
Main Menu
Main Menu Setup 19
Audio Adjust 19
Video Adjust 20
Source Setup 21
Others 22
5
00
3
Contents
08
38
Eject a Disc
Program Playing
33
Number Buttons 34
Setting the Playback Time 34
MO/ST Selector 34
34
Playing PBC (Menu) 34
Exit an USB 34
Tuner
Band Selector
Manual/Automatic Tuning
Selecting the Stored Station
DX/LOC Selector
MO/ST Selector
On-screen Display
Scanning/Memorizing Stations
Automatically
Number Buttons
Selecting Station Directly
35
35
35
35
35
36
36
36
36
To Capture Picture 36
Radio Menu 37
7
Additional Information
Simple Troubleshooting Guide 38
8
Simple Troubleshooting Guide
No power.
Check and make sure whether the fuse is blown,
replace with the proper value if necessary.
Some errors occur in
LCD or no function
pressing the button.
the
when
Unable to receive stations.
Poor effect on receiving a
station.
CDs cannot be loaded.
Sound skips.
No images.
Images skip.
Press RESET button.
Check and make sure whether the antenna is
inserted or the antenna is properly connected, if
not, insert the antenna or connect it properly.
Antenna may not be the proper length. Make sure
the antenna is fully extended; if broken, replace
the antenna with a new one.
A CD is loaded in the mechanism.
The CD is dirty or damaged.
The Video line from main unit to the TV is not
connected properly.
Improper setting of the color system. Set the color
system according to the
connected television.
to PAL or NTSC
.
.
.
Note:
If any of the problem persist after check list had been made, consult your nearest service dealer. Never
attempt to disassemble your unit by yourself.
The following checklist might help to solve the problems which you meet when using
the unit. Please double check and make sure if the connection and the procedure of
the operation is properly before using the checklist .below
Problem
Cause/Solution
.
.
.
.
.
The antenna is poorly grounded, check and make
sure the antenna is properly grounded at its
mounting location.
.
Due to continuous product improvement, the operations
are subject to run the model.
Additional Information
07
37
Before You Start
IMPORTANT SAFEGUARDS
About this manual
1. Be sure to connect the color coded
leads according to the diagram.
Incorrect connections may cause
the unit to malfunction or damage
,
the vehicle s electrical system.
2. Be sure to connect the speaker (-)
leads to the speaker (-) terminal.
Never connect the left and right
channel speaker cables each other
or to the vehicle body.
3. Make sure all the connections are
completely correct before turning
on your unit.
4. When replacing the fuse(s), the re-
placement must be of the same am-
perage as shown on the fuse holder.
5. Do not block vents or radiator pa-
nels. Blocking them will cause heat
to build up inside and may result in
fire.
6. After completing the installation and
beginning to play the unit(including
replacing the battery), please remove
the front panel at first, and then press
RESET button on the base with
pointed object (such as ball-point
pen) to set the unit to initial status.
This unit features a number of sophisti-
cated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
This manual main explains remote
control operation. However, in
addition to those functions related with
DVD/VCD/CD/MP3/MEPG-4/USB
operation that can only be operated by
the remote control, there are also
functions can be operated by the buttons
provided for the main unit.
Tuner
Radio Menu
Press SETUP button, the monitor shows the radio setup menu, you can press [ ][ ][ ]
[ ] to select your desired item, then press ENTER on the remote control.
Press , or to select EXIT, then press ENTER to exit the setup.
27
19
Note:
* This function is only operated by using remote control.
RADIO MENU
AREA
STEREO
LOCAL
PICTURE
EUROPE
AREA
EUROPE
U.S.A
FM ONLY
EUROPE
AREA
To show how to set the radio area:
Press or , then press ENTER Press , or , then press ENTER
EXIT
RADIO MENU
AREA
STEREO
OFF
STEREO
ON
OFF
OFF
LOCAL
STEREO
To show how to set stereo or mono station:
Press or , then press ENTER Press , or , then press ENTER
PICTURE
EXIT
RADIO MENU
AREA
STEREO
LOCAL
ON
LOCAL
ON
OFF
ON
PICTURE
Press or , then press ENTER Press , or , then press ENTER
LOCAL
To show how to set local or long distant station:
EXIT
RADIO MENU
AREA
STEREO
ON
PICTURE
CAPTURED
PRESET
ON
PICTURE
Press or , then press ENTER Press , or , then press ENTER
PICTURE
To show how to set picture:
EXIT
LOCAL
01
5
Before You StartTuner
36
07
Handle the disc by its edge to keep
the disc clean, and do not touch
the surface.
Do not attempt to modify the unit,
modifying the unit may cause an
accident.
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
Do not work in extremely high or
low temperature. Be sure the
temperature inside the vehicle
is between +60 C and -10 C
before turning on your unit .
To enjoy optimum sound and
images while playing, handle the
discs as follows:
Do not use your CDs with paste residue
or ink attached.
Do not use CDs with labels or stickers
attached, which may leave a sticky residue
while beginning to peel off.
(Shown as the picture)
Clean the discs with an optional clean-
ing cloth. Wipe each disc from the center out.
(Shown as the picture)
PRECAUTIONS
This unit can play the following discs only:
* This function is only operated by using rem-
ote control.
Type of disc
VCD
12cm
MP3
12cm
CD
12cm
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.
12cm
DVD
Label on the disc Recorded material
Sound and moving
pictures
Sound and moving
pictures
Sound only
Sound only
Size of disc
MPEG-4
Sound and moving
pictures
12cm
MPEG-4
USB
Sound and moving
pictures
Version 2.0
and less
Scanning/Memorizing Stations
Automatically
During radio status, you can press AMS
button on the remote control to scan each
stored station 5 seconds respectively which
stored in Number Buttons (from 1 to 6).
You can press the corresponding Number
Buttons or AMS button when your desired
station is charged. And it starts playing that
station.
When press and hold AMS ,
automatically memory storing fun-
ction. The radio automatically selects a
station and has it stored in any one of the
Number Buttons from 1 to 6.
button it will
activate
4
23
Notes:
Number Buttons
During radio mode, Number Buttons
from 1 to 6 can help you store your
favorite station. You can follow the
as below:
steps
You can store up to 18 FM stations 6 each
for FM1,FM2,FM3),up to 12AM stations
(6 each for AM1/MW and AM2/LW).
(
23
When receiving a station, press and hold
any one of the Number Buttons until CH
appears in the LCD, which indicates that
station is already stored in the corres-
ponding number button.
Note:
This function is operated by using the remote
control only.
The unit can be stored up to 6 stations for
each band.
Regarding the function of Number Buttons,
refer to Number Buttons for more inform-
ation.
*
*
*
4
Selecting Station Directly
Press GOTO button, the monitor shows:
FR:, input the number to receive the station
of this frequencies.
Note:
2
* This function is only operated by using rem-
ote control.
To Capture Picture
Press P/N button, the monitor shows:
Wait, Capture Logo....,when the monitor
turn to black, the picture is captured.
11
* It had better to use the picture size is 4:3.
* To avoid big picture.
Note:
07
35
Before You Start
6
Replacing the Fuse
Make sure the amperage matches the
specified value when replacing the fu-
ses. If the fuse is blown, check the po-
wer connection and replace with a n-
ew one. If the same problem occurs,
it would be subjected to the malfun-
ction. In such cases, please consult
to the nearest service dealer.
When the range of the operation of the
card remote control becomes short or no
functions while operating. Replace the
lithium battery with a new button cell
(CR2025). Make sure the battery polarity
before replace.
Precautions on Using Lithium
Battery
Always keep the lithium battery beyond
children s reach. In case
swallowed, see a doctor immediately.
Cleaning the battery with a dry cloth,
to ensure its perfect connected.
Make sure the proper polarity when
loading with the battery.
To prevent short circuit, do not use
metal tweezer to clip the battery.
Gently pull out the Battery Holder while
pressing the Stopper.
Put the button-type battery with mark(+)
upward into the Battery Holder.
Replacing the Battery
Insert the Battery Holder into the Remote
Control.
!
Maintenance
Warning
Never use the fuse with the rated
amperage more than that supplied to
your unit, otherwise it will damage the
unit.
Warning!
Improper handle with the battery may
lead to explosion.
It cannot be charged , disassembled or
thrown into a fire.
!
Tuner
FM2
MW2(AM2) MW1(AM1)
FM3
FM1
FM2
LW MW
FM3
FM1
(For Two Bands)
During radio status, repeatedly press
BAND button to select bands in
lowing order:
the
fol
Band Selector
Manual/Automatic Tuning
Manual Tuning: Briefly pressing (
button on the remote control continuously to
select a or res-
pectively.
or )
station downward upward
Automatic Tuning: ress and
button seconds, the
radio a station
or respectively and plays
when it finds a station.
P hold ( or
) for more than 3
automatically searches down-
ward upward
(For Three Bands)
It is set to LOC mode when button
is first pressed. LOC pears on the
display and only local tion is available.
LOC
ap
sta
It is switched to DX mode when
is pressed again. Both and local
stations can be received.
LOC
distance
During radio status, you can press ST
button on the remote control Mono
mode or Stereo
to select
mode.
DX/LOC Selector
During radio status, press LOC button on
the remote control to select or weak
station reception.
strong
Notes:
MO/ST Selector
Stereo reception is charged when ST
appears.
It is switched to MONO mode
disappears.
when
ST
3
5
6
Note:
Note:
Note:
20
1
1
2
2
* LOC mode is functional only in selecting
and memorizing stations.
* The initial mode is DX mode.
* Pressing BAND button on the head unit
performs the same function.
* Pressing button on the head unit performs
the same function.
12
Selecting the Stored Station
During radio mode, press to select the
upward stored station, press to select the
downward stored station.
Note:
27
* This function is only operated by using rem-
ote control.
* This function is only operated by using rem-
ote control.
20
5
5
On-screen display
Press OSD to display the current
information.
* This function is operated by using remote
control.
the
Note:
8
* This function is only operated by using rem-
ote control.
01
7
Before You Start
06
34
Location of the Controls
Front Panel
Base
Number Buttons
During playback, you any track
directly by ( 0~9).
The selected track will be played auto-
matically.
can select
using Number Buttons
* This function is operated by using remote
control only.
Note:
23
MO/ST Selector
During VCD playing, repeatedly press
AUDIO button to select the mode as bellow:
This function is operated by using the remote
control.
Mono left
Mono right
Stereo
6
Note:
*
Program Playing
During VCD/CD mode, press PROG, the
TFT displays the program menu. Pressing
NUMBER BUTTONS to select the track
Number and then press to move the cursor
to START, press ENTER to start program
playing; move the cursor to EXIT and press
ENTER to exit the program playing. Move
the cursor to and press ENTER to the last
page; move the cursor to and press
ENTER to the next page.
During this process, press to cancel
the program playing.
13
18
The function is only valid on remote control.
Note:
*
27
Playing PBC (Menu)
During VCD status, firstly pressing
TITLE, PBC playback starts and the menu
of entire disc appears on the monitor. And
then you can select your favorite track by
using Number Buttons . When a track is
playing, you can button to return
to if you would like to end the
track and select others. To cancel PBC
playing, press button again.
press
the menu
TITLE
18
23
3
This function is operated by using the remote
control.
Note:
*
PBC playing confirms to version 2.0 of SVCD/
DVD disc only.
*
3
Exit an USB
During USB mode, the main unit would
switch to TUNER mode directly when exit
the USB.
Fit on the harness rubber after exiting the
USB.
Note:
During other modes, the main unit will keep
the previous mode when exit the USB.
VCD/CD/MP3/MPEG-4/USB
27
During CD playback, first press GOTO,
and TFT shows : disc go to:--:--,press your
desired time of the playback by using num-
ber buttons. Secondly press GOTO button,
track go to:--:-- appears on TFT, also input
your desired numbers to play the current
time of your selection.
Setting the Playback Time
2
During VCD mode, press GOTO button
to set the playing time, when the TFT dis-
play :
. Press [ ][ ] to select the options,
press ENTER to set the status.Then press
NUMBER BUTTONS or [ ][ ] to set
the current status.
track/disc time/track time/repeat/time
disp
23
2
During MP3/USB mode, press GOTO
firstly to display : ---/all track, input the
numbers to play the desired track. Press
secondly : to adjust the playing time.--:--
2
2
During MPEG-4 mode, press GOTO first
to display : select:---, input the numbers to
play the desired track. Press seco-
ndly : to adjust the playing time.
GOTO
time-:--:--
10
16
13
1
5
23 46 7
8
9
11 12 14
15
17
06
33
Before You Start
8
Press this button to turn on the unit,
press it again to turn off.
PWR button
11
Press REL button to release the front
panel.
2
Rotate (VOL) button clockwise to
increase the volume level; and rotate
(VOL) button anticlockwise to de-
crease the volume level. Briefly press it
to set the volume characteristics; press
and hold it to show the system menu;
rotate it to set the item.
MENU-VOL button
3
USB Socket
5
During radio mode, briefly press it to
adjust the preset stations; press and hold
it to memory stations automatically.
Firstly press it, then press to
select stations.
During playback, press it to activate the
repeat play function.
AMS RPT button
6
7
88
Briefly press it to select radio mode or
playback mode; keep press it to mute.
9
MOD/MUT button
11
During radio mode, press it to select
different bands.
During playback, press it to play or
pause play.
BND/ button
12
Repeatedly press to do manual seek
tuning and track search controls.
14
4
To display current status.
LCD (LIQUID CRYSTAL DISPLAY)
13
Press it to eject the disc.
Press to set the unit to initial status.
10
RESET button
Disc Loading Slot
Infrared Sensor
15
EJECT button
Slow motion playback
During VCD mode, press to slow
forward or slow backward. There are such
speeds each pressing decreases the speed
until the minimum speed is reached.
* This function is operated by using remote
control.
the
1/8
1/ 2 1/ 4
10
Note:
During VCD mode, press ZOOM to
increase the picture in size. There are such
sizes as following:
* This function is operated by using remote
control.
the
Picture Sizes
9
Note:
2X 3X 4X
* To perform this function with the button.
27
On-screen display
During VCD/CD playback, press OSD,
the monitor shows:
* This function is operated by using remote
control.
the
Note:
8
Single elapsed time
Total
elapsed time
Total
remain time
Single remain time
OFF
Eject a Disc
Firstly press , then press button to
eject a disc.
*
This function only be operated by the head
unit.
can
Notes:
2
13
Pause the Playback
During playback, press
button to
suspend the playback, Press it again to
return to normal playback.
Pressing on the head unit also performs
the same operation.
Note:
*
17
File Selector
During MP3/MPEG-4/USB stop mode,
press to select file or file document.
Press ENTER to open it.
27
Note:
This function is operated by using remote
control.
the
*
button/
(RELEASE) button
16
Press it to
select the corresponding
preset modes to adjust the sound
quality.
EQ button
During radio mode, press it to select
the distant or local station.
LOC button
Press it to activate LOUD function
LOUD button
VCD/CD/MP3/MPEG-4/USB
Changing audio language
(Multi-audio)
MPEG-4 can provide audio playback with
different language. With discs featuring
multi-audio recordings, you can press
AUDIO to switch between language and
audio systems during playback.
AUDIO 1 AUDIO 2 AUDIO 3
Selection options switch as follows:
* This function is operated by using remote
control.
the
* This function only operates with MPEG-4
featuring multi-audio recordings.
* The number in the mark on a MPEG-4
package indicates the number of recorded
languages/audio systems.
2
Note:
6
During VCD/CD/MP3/MPEG-4/USB play-
back, hold and press this button to display
the current source information.
/
AUX In
17
01
9
Before You Start
06
32
Card Remote Control
Tips:
For more information as to replacing battery, please refer to Replacing the Battery
on page 6.
VCD/CD/MP3/MPEG-4/USB
Repeat Playing
During playback , press replay
the current track. Press it again to cancel
this function.
RPT to
Pressing RPT on the head unit also
performs the same operation.
15
Note:
*
Playing Tracks Random Orderin
During VCD/CD/MP3/MPEG-4 playback,
when RDM button , the unit
plays random under the
directory which you select. P
return to
pressing
any track at
ress RDM
again to normally playing.
16
The default setting is Disc Repeat.
*
During MP3/USB playback, press to
play the the previous track, press to play
the next track.
* Pressing button on the head unit also
the same operation.performs
Playing the Previous/Next Track
12
27
Note:
Press or to play the track fast forward
or fast rewind: each pressing, the change is as
following:
Playing Track F.F/F.REW
20
Note:
2X
Stop the playback
18
During MP3/MPEG-4/USB mode, press
to pause playing, press it again to play the
current track.
During VCD/CD/MPEG-4 playback, firstly
pressing to replay the current track,
press within 3 seconds to play the pre-
vious track, press to play the next track.
21
4X 8X 16X
18
Note:
During VCD/CD mode, firstly pressing
to pause playing, pres to play, press
button twice to stop playing completely, press
PLAY button to start playing.
17
* This function is operated by using the remote
control only.
Playing Discs/USB
While playing discs, just insert a disc (with
labeled side up) into (Disc Loading Slot)
(Shown as picture), t mechanism will
automatically on. If a disc is loaded,
press (MODE) button start the playing.
the
he
switch
to
9
When playing USB, firstly unstop the rubber
plug, then insert USB in USB socket, the
mechanism will automatically play. If USB
have been inserted, press MODE to switch
to USB playing mode.
Pressing SOURCE on the remote control also
performs the same operation.
Note:
Any modes there is a USB infixed, when close
the front panel, the unit will switch to the USB
mode.
21
6
Note:
* This function is operated by using the remote
control only.
1
2
3
4
5
6
20
7
8
9
10
11
12
13
14
15
16
17
18
19
21
22
23
24
25
26
27
* This function is operated by using the remote
control only.
05
31
DVDBefore You Start
10
1
GOTO (time/track) button
---Preferences page--
Default
Example showing how to set load factory setting:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Load Factory Setting
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Reset
PWR (turn on/off) button
2
BAND/TITLE (band selection/ title
menu) button
3
AMS/MENU (preset stations, memory
automatically/menu) button
4
5
LOC/SUB-T (long distant or local station
selection/region function/subtitle display)
button
6
ST/AUDIO (stereo or mono selection
/language or audio switch) button
7
ANGLE (play angle) button
8
Briefly press it to display the current
information; press and hold it to adjust
the current setup.
OSD (current display) button
9
ZOOM (briefly press it to zoom in or
out/ hold and press it to adjust video
display screen) button
10
(slow play) button
11
P/N (system adjustment) button
12
(mute) button
13
PROG (program play) button
14
VOL+/VOL-/SEL (volume adjust/sound
characteristics setup) button
15
RPT (repeat play) button
16
RDM (play at random) button
17
(Play/pause) button
18
(Stop play) button
19
SETUP button
20
(F. /F.F) buttonREW
/
21
(Previous/next track) button
/
22
CLEAR button
23
0~9 (number) button
24
SOURCE (mode switch) button
25
LOUD (loudness) button
26
EQ (equalizer) button
27
ENTER(Left/Right/Up/Down
ENTER)
01
11
Before You StartDVD
30
05
AM Tuner Section
CD Player Section
522-1620(KHz)
(Europe/Russia)
530-1710 (KHz)
(U.S.A.)
450KHz
28dBuV
VCD Signal System
PAL/NTSC
65dB
60dB(1KHz)
0.1%
General
FM Tuner Section
87.5-108(MHz)
(Europe)
87.5-107.9(MHz)
(U.S.A.)
10.7MHz
10dBuV
60dB
30dB 1KHz
30-15000Hz
Note:
Due to continuous product improvement,
specifications and design are subject to
change without prior notice.
Specifications
Power Requirement
14.4V DC
(11-16V allowable)
Load Impedance
10dB
Bass 100Hz
Treble 10KHz
Tone Controls
Approx.192 x 178 x50
mm
(d/w/h)
Dimensions
Approx.1.75kgWeight
Mounting
Dimensions
Approx.169 X 182X53
mm
(d/w/h)
Tuning Range
IF Range
Usable Sensitivity
(-30dB)
Signal-to-noise Ratio
Stereo Separation
Frequency Response
Frequency Range
IF Range
Usable Sensitivity
(-20dB)
Signal-to-noise Ratio
Separation
Distortion
DVD Player Section
Number of channel
5Hz to 20,000Hz
98dB
73dB
Frequency Response
Dynamic Range
Signal-to-Noise Ratio
2 channels
Less than
measurable limit
Wow and Flutter
65-74(MHz)
Russia)
Max.Power Output
45W X 4
(Optional )
(Optional )
---Preferences page--
Disc Menu
Example showing how to set Disc Menu Language:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Preferred Menu Language
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Parental
Example showing how to set parental control:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Set Parental Control
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Password
Example showing how to set password, and the default pas sword is 8888.
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Change Password
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Change
2
3
4
5
6
7
8
Off
G
PG
PG 13
PGR
R
NC 17
Adult
English
French
Spanish
Chinese
Japanese
Russian
Thai
Korean
05
29
DVDInstallation
12
02
---Preference page---
TV Type
Example showing how to set TV type:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Set TV Standard
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
PAL
Auto
Audio
Example showing how to set Audio language:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Preferred Audio Language
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
Subtitle
Example showing how to set subtitle language:
(Press , or , then press ENTER)
(Press
--Preference Page--
Go To Preference Page
Preferred subtitle Language
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Parental
Password
Default
Auto
Eng
Eng
Eng
NTSC
English
French
Spanish
Chinese
Japanese
Russian
Thai
Korean
English
French
Spanish
Chinese
Japanese
Russian
Thai
Korean
Wiring Connection
1
Front RCA
Antenna Receptacle
3
2
Rear RCA
Video Out Receptacle
4
7
6
2
3
4
5
L white
R red
L white
1
Front RCA
Rear RCA
Light Grey
Dark Grey
Video In
Yellow
Black
Video Out
Yellow
Grey
Antenna
Black
5
Video In
Output Plug (Male)
Output Socket (Female)
6
7
8
Subwoofer
Brown
Brown
AUX In (optional)
9
R red
8
Note:
* Do not connect the pink wire to the battery,otherwise it will use up the power of the battery.
Subwoofer
9
L white
AUX In
Black
R red
7
Antenna
Power +
Rear R
Speaker
Front R
Speaker
Parking Brake
Ignition Key
Rear L
Speaker
Front L
Speaker
Ground
Yellow
Red
Blue
Green/Black
Green
White/Black
White
Violet/Black
Violet
Grey/Black
Grey
Black
FILTER
&FUSE
BOX
Pink (optional)
Brown
Battery +
Lamp In
Reversing video in
Brown
Yellow
10
Reversing Signal
10
Reversing Video In
Orange
(Optional)
02
13
Installation DVD
28
05
A
B
REL
Install the Front Panel
Put notch (Shown as picture)
shaft . And then press into the
right side.
onto
slightly
A
B
Note:
Never put any objects into the panel. front
2
Press button in the upper
corner, and then the front panel will be
folded down.
right
(REL) (REL)
When the front panel was turned down
to a position of 45 , hold and slide the
front panel to left, pull it out . and then
--Dolby Digital Setup--
Dual Mono
Example showing how to set stereo mode:
(Press
(Press , or , then press ENTER)
--Dolby Digital Setup--
Dual Mono
Dynamic
Go To Dolby Digital Setup
Dual Mono
Dynamic
Dual Mono (1+1) Setup
Stereo
L-Mono
--Dolby Digital Setup--
R-Mono
Mix-Mono
Dynamic
Example showing how to set dynamic range compression:
(Press
(Press , or , then press ENTER)
--Dolby Digital Setup--
Dual Mono
Dynamic
Go To Dolby Digital Setup
Dynamic
Set DRC off
--Dolby Digital Setup--
1 4
1 2
3 4
Dual Mono
05
27
DVDInstallation
02
14
Installation Method DIN Front-Mount
11
Bend these claws
outward for a tight fit,
if necessary.
To support the unit
Fire Wall
Installation Method
2
Installation using the screw holes at
sides of the unit.
the
1. Remove the hooks on both sides.
2. Select a position where the screw holes
of the mounting bracket supplied with
the car and the holes of the main
unit (are fitted), and
screws (see at 2 places
on each side. And then fasten them to
the car.
screw
become aligned
tighten the
4
Outer Trim Frame Hook
Mounting Sleeve are not used
and
for installa-
tion method
5
1
9
2
NOTE:
Bracket supplied
to your car
Bracket supplied
to your car
H
o
o
k
H
o
o
k
Dashboard
or Console
Dashboard
or Console
--General Setup Page--
Captions
Example showing how to set captions on/off:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To General Setup Page
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Wide
On
Eng
Off
Screen Saver On
Closed Captions
Off
On
Logo Type Def
Screen Saver
Example showing how to set Screen Saver on/off:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To General Setup Page
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Screen Saver
On
Off
Logo Type Def
Logo Type
Example showing how to set Logo Type:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To General Setup Page
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Logo Type
Default
Captured
Logo Type Def
Logo Type Def
Logo Type Def
Logo Type Def
02
15
InstallationDVD
26
05
£p £p
Detach the Unit
1.Take out the Outer Trim Frame after
detaching the front panel.
Detach the front panel before disassembl-
ing the unit. F
efer to the Front
Panel .
or more details regarding
this section, r Detach
2.Insert the keys supplied to the unit at
both sides of the unit (shown as illustrat-
ed) until they click. Pulling the keys
makes it possible to remove the unit from
the dashboard.
Main Parts List
Mounting Sleeve x1 Rear Mounting Bolt x1
4 Screws
M 5 x 5
Harness Rubber x1
Keys x 2
Outer Trim Frame x 1
Connecting Wire x1
Steel Bar x 1
--General Setup Page--
TV Display
Example showing how to set TV Display mode:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To General Setup Page
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Set TV Display mode
Normal/PS
Normal/LB
Wide
Logo Type Def
Angle Mark
Example showing how to set picture mode:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To General Setup Page
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Set Angle Mark
On
Off
Logo Type Def
OSD Lang
Example showing how to set language mode:
(Press
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Go To General Setup Page
--General Setup Page--
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Wide
On
Eng
Off
On
Set OSD Language
English
French
Logo Type Def
Logo Type Def
Logo Type Def
Logo Type Def
05
25
DVDInstallation
16
02
Cleaning the Connector
If the connector between the main unit and the
front panel is dirty, it may result in unit s ab-
normal working condition. To avoid such pro-
blems happening, please detach the front panel,
and clean the connector with an swab.
Gently clean and avoid damaging the connector.
alcohol
* For safekeeping, always shut down the generator
and take out the key ignition before cle-
aning.
Never keep your finger or any metal touch
the connector directly.
from the
device
Notes:
The main unit
The backside of the front panel
Selecting Different Menu/Title
Under DVD playback mode, press MENU
or TITLE to return to the root menu or
the title menu, the monitor display all the
chapters or all titles. You can press and
Number Buttons on the remote co-
ntrol to select different chapter or title.
* This function is operated by using remote
control.
the
27
Note:
Changing audio language
(Multi-audio)
DVDs can provide audio playback with
different language. With DVDs featuring
multi-audio recordings, you can press
AUDIO to switch between language and
audio systems during playback.
AUDIO 1 AUDIO 2 AUDIO 3
Selection options switch as follows:
* This function is operated by using remote
control.
the
* This function only operates with DVDs fea-
turing multi-audio recordings.
* The number in the mark on a DVD's
package indicates the number of recorded
languages/audio systems.
2
Note:
6
Changing the subtitle language
(Multi-subtitle)
With DVDs featuring multi-subtitle recor-
dings. You can press SUB-T to switch
between subtitle languages during playback.
Subtitles 1
Subtitles 2
Subtitles OFF
Selection options switch as follows:
* This function is operated by using remote
control.
the
* This function only operates with DVDs fea-
turing multi-subtitle recordings.
* The number in the mark on a DVD's
package indicates the number of recorded
subtitle languages.
2
Note:
5
23
3
SET UP MENU
During DVD playback, press SET UP ,
the screen will display system setting pic-
ture, the user can select some relative con-
stant parameters. The user also can set it as
needed by moving he cursor and using
[ ][ ][ ][ ] buttons, and then press
ENTER to
t
execute the selecting or enter-
ing item.
* The selections are the preferred options that
will be chosen if they are available on a disc.
If the disc that is inserted does not have the
preferred option then the discs own pre-
ference will be used.
Note:
19
27
27
* Some functions varies depending on the types
of models or formats of the disc.
* Regarding SETUP MENU, please refer to
the following pages for more details.
Eject a Disc
Firstly press , then press button to
eject a disc.
*
This function only be operated by the head
unit.
can
Notes:
13
2
4
Common OperationsDVD
03
17
24
05
Reset the Unit
Operating the unit for the first time or after
replacing the car battery, you must reset
the unit.
VOL
FAD
BAL
TRE
BAS
Setting the Sound Characteristics
Press VOL+ button to increase sou-
nd level and press VOL- button to decr-
ease sound level.
the
the
Repeated briefly pressing SEL button to
select the mode in the following order:desired
Volume Control
* Rotating VOL on the head unit also performs
the same operation.
* Pressing SEL and rotating VOL button on the
unit perform the same function.head
Note:
* When ome errors occur on the
also press RESET
it will
s display, you can
button to resume to normal,
and erase the clock setting and some me-
morized functions.
* This function can only be operated by the
head unit.
Remove the front panel at first, and then
Press RESET button on the base w
object, (such as a ball
the unit to initial status.
ith
a pointed point pen)
to set
10
Turning the Unit On/Off
Press PWR button to turn on the unit,
press it again, the unit is still in waiting
status. When insert a disc, unit will au-
tomatically start playing. Keep pressing it
to turn off the unit completely.
the
the
1
* Pressing PWR button on the head unit also
performs the same operation.
Note:
14
14
Note:
14
1 After selecting the desired mode, you
adjust the current level by pressing
.
can
VOL buttons
14
,
2 If you don t adjust VOL buttons
in 3 seconds after selecting the desired
mode, the unit will automatically return
to the current mode being displayed.
wi-
th
14
Note:
EQ Setting
Repeatedly pressing button to choose
the following modes turn:
EQ
in
While listening to the popular music, classic
music or rock music, you select the co-
rresponding preset modes to adjust the sou-
nd quality ing EQ button.
can
perfectly by us
ROCKPOP CLASSIC
OFF
* Pressing EQ button on the unit also
performs the same operation.
head
26
26
Note:
On-screen display
During DVD playback, press OSD, the
monitor shows:
* This function is operated by using remote
control.
the
Note:
8
ANGLE 1 ANGLE 2 ANGLE 3
Changing the viewing angle
(Multi-angle)
With DVDs featuring multi-angle (scenes
shot from multiple angles) recordings, you
can press ANGLE to switch among
viewing angles during playback.
Selection options switch as follows:
7
Repeat Playing
press RPT on the remote control to re-
play as following:
* Pressing AMS on the head unit also performs
the same operation.
* The default setting is DISC REPEAT.
Note:
15
Number Buttons
press Number Buttons to input the
desired tracks, then it will be played auto-
matically.
Note:
23
* This function is operated by using remote
control.
the
Chapter
Title
Off
Title elapsed time
Chapter
elapsed time
Chapter
remain time
Title remain time
OFF
* This function is operated by using remote
control.
the
Note:
* This function is operated by using remote
control.
the
Note:
3
* This function is only operated by DVD with
multi-angle recordings.
* This mark on a DVD package indicates
it features multi-angles scenes,
The number in the mark indicates the
number of angles from which scenes were slot.
3
* If you press ANGLE during fast forward/fast
reverse or pause, fast forward/fast reverse or
pause is canceled and normal playback resumes
but the viewing angle does not change.
Press and hold this button to display the
current information.
Setting the Playing Time
During DVD mode, press GOTO button
to set the playing time, when the TFT dis-
play : /chapter/audio/subtitle/angle
/title time/chapter time/repeat /time disp.
Press [ ][ ] to select the options, press
ENTER to set the status.Then press NU-
MBER BUTTONS or [ ][ ] to set the
current status.
title
2
7
2
7
23
2
Common Operations
03
18
05
23
DVD
Receptor on the head unit for the card
remote commander.
7
¼òµ¥¹ÊÕÏÅųýÖ¸ÄÏ
Turning Loudness On/Off
Press
activate LOUD function. You can
this button to increase the low
quency, which can improve sensi ty for
ears. And LOUD pears . Press
it gain to down LOUD function.
LOUD button on the remote co-
ntrol to
press fre-
tivi
your ap
a shut
25
Note:
Press button to shut off sound
output. Press it again to resume to previous
volume level.
the
Mute Function
Mode Selector
Press SOURCE button to select radio
mode or playback mode.
* Briefly press MODE on the head unit also per-
forms the same operation.
Infrared Sensor:
Note:
Note:
24
You can input the audio frequency into the
main unit to increase the volume through
AUX.
AUX In(optional)
12
Basic operation of DVD
Insert a DVD disc into the slot, the unit will
automatically switch on, if a DVD disc is
loaded, press SOURCE on the remote
control to start the playback.
* Pressing button on the head unit to eject
a disc.
24
Note:
During DVD playback, firstly pressing
to replay the current track, press within
3 seconds to play the previous track, press
to play the next track.
* Pressing button on the head unit also
the same operation.performs
Stop the playback
Playing the Previous/Next Track
12
21
Note:
18
Note:
System Button
During DVD playback, press P/N button
to select standard TV system as following:
Note:
11
Press ZOOM to increase the picture in
size. There are such sizes as following:
* This function is operated by using remote
control.
the
Increase the size of the picture
9
Note:
* This function is operated by using remote
control.
the
Press or to play the track fast forward
or fast rewind: each pressing, the change is as
following:
Playing Track F.F/F.REW
20
Note:
2X 4X 8X 16X
During DVD mode, firstly pressing to
pause playing, pres to play, press
button twice to stop playing completely, press
PLAY button to start playing.
17
Slow motion playback
Press to slow forward or slow back-
ward. There are such speeds each pressing
decreases the speed until the minimum
speed is reached.
* This function is operated by using remote
control.
the
10
Note:
AUTO NTSC
PAL
2X 3X 4X
No Change
Pause the playback
Note:
* Press on the head unit also performs the
same function.
During DVD mode, press to switch
pause and play mode, during stop mode,
press it again to resume to the playback mode.
17
* This function is operated by using the remote
control only.
1/8
1/ 2
1/ 2
1/ 4
1/ 8 1/ 4
* Press LOUD on the head unit performs the
same function.
Force Disc Out
During playback, when a disc was locked or
can not eject, press MODE on the head unit,
and hold and press the button 3 seconds,
that disc can be forced out.
* Press and hold MUT on the head unit performs
the same function.
Press CLEAR to clear the mistake input.
CLEAR
Note:
22
* This function is operated by using the remote
control only.
21
Display Mode
During video playback, press and hold
ZOOM button to select 4:3 display mode,
press and hold it again to display the previous
one.
* To set this function by WIDE in MAIN MENU.
Note:
9
* This function is operated by using the remote
control only.
Main Menu
04
22
04
19
Set up Main Menu
Press and hold SETUP, the setting picture
appears as follow:
* Buttons of ENTER are
on the remote control.
[ ] [ ] [ ] [ ]/
The main menu includes 5 selections above,
press or button to select the requisite it-
em, then hit ENTER to set it; press or
button to reach EXIT, press ENTER to
exit setting.
Note:
4.PREFERENCE SETUP
Select PREFERENCE, then press ENTER.
This menu can set up the above items by
pressing [ ] and [ ] and ENTER.
Press or BACK, then press ENTER to
back to the previous menu.
Clock System
Setting CLOCK SYSTEM in this menu,
according to the desired setting 12 HOUR
or 24 HOUR, the default setting is 24 HO-
UR. Press [ ] and [ ] and ENTER.
Press or BACK, then press ENTER to
back to the previous menu.
Clock Adjust
KEY BEEP
Setting CLOCK ADJUST in this menu,
Press [ ] and [ ] and ENTER.
Press or BACK, then press ENTER to
back to the previous menu.
Setting KEY BEEP ON or OFF in this menu,
the default setting is OFF.. Press [ ] and
[ ] and ENTER.
Press or BACK, then press ENTER to
back to the previous menu.
Main Menu
* Rotate and press VOL button on the head unit
performs the same function.
1.Audio Adjust
After Selecting AUDIO, press ENTER to
enter the setting system:
You can adjust BALANCE, FAD, BASS
TREBLE, EQUALIZER, LOUDNESS,
press [ ] or BACK then press ENTER to
back to the previous menu.
For example, press [ ] [ ] to select FAD,
the setting menu will appear as follow:
Press to increase or decrease the
size, and then press ENTER. Press [ ] to
back to the previous menu.
[ ] [ ]
* Adjusting the other items perform the same
operation.
Note:
BATTERY
GROUND
REVERSE POLA
Setting reverse pola in this menu, The signal
is +12V when you back a car, please set
BATTERY; if the signal is 0V, please set
GROUND.Press [ ] and [ ] and ENTER.
Press to go back to the previous menu.
04
20
04
21
Main Menu
Main Menu
2.Video Adjust
Selecting VIDEO in main menu, press
ENTER to enter setting system.
The main menu includes items above.
Press or BACK and then press ENTER
to back to the previous menu.
Image Adjust
Adjusting the CONTRAST : press[ ]or
[ ] to select CONTRAST, then press
ENTER, the setting menu appears as
follow:
Press to increase or decrease the
size, and then press ENTER. Press [ ] to
back to the previous menu.
[ ] [ ]
Adjusting the
other items perform the same operation.
3.Source Setup
Selecting SOURCE SEL by pressing
in main menu, press ENTER to enter
setting system.
This menu can set up the above items by
pressing [ ] and [ ] and ENTER.
If you set one of them OFF, the function
is invalid. For example, if one item set OFF
pressing SOURCE button can not activate
it. During playback mode, you can not
set it OFF.
USB ON/OFF
Turning on or off the USB can be set in this
menu, the default setting is ON.
Press or to select, then press ENTER.
EQUALIZER
Press[ ]or [ ] to select EQUALIZER,
then press ENTER, the setting menu
appears as follow:
Press to select your desired item,
then press ENTER, press to back to the
previous menu.
[ ] [ ]
LOUDNESS
Press[ ]or [ ] to select LOUDNESS,
then press ENTER, the setting menu
appears as follow:
Press to select your desired item,
then press ENTER, press to back to the
previous menu.
[ ] [ ]
WIDE
WIDE
Press[ ]or [ ] to select WIDE, then press
ENTER, the setting menu appears as follow:
Press to select your desired item,
then press ENTER, press to back to the
previous menu.
[ ] [ ]
Default
Adjusting the DEFAULT : press[ ]or [ ]
to select DEFAULT, then press ENTER,
the setting menu appears as follow:
The main menu includes selections above,
after selecting any one of them, DEFAULT
will switch to USER.
press or button to adjust item, then press
ENTER.
Press to back to the previous menu.
DVD ON/OFF
Turning on or off the DVD can be set in this
menu, the default setting is ON.
Press or to select, then press ENTER.
AUX ON/OFF
Turning on or off the AUX can be set in this
menu, the default setting is ON.
Press or to select, then press ENTER.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

FREEWAY DVD-2685 User manual

Category
Car media receivers
Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI