2. ESAB
  3. Accessories for 4HD and 2E Wire Feeders

ESAB Accessories for 4HD and 2E Wire Feeders Accessories

  • Hello! I am an AI chatbot trained to assist you with the ESAB Accessories for 4HD and 2E Wire Feeders Accessories. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
ACCESSORIES FOR 4HD AND 2E WIRE FEEDERS
F-15-168
February, 1995
BOOM HANGING BRACKET KIT
P/N 34321
The Bracket Kit provides a way to hang the
wire feeder from a fixed or mobile overhead
mount.The Kit includes mounting hardware.
CARRYING HANDLE KIT
P/N 34320
The Carrying Handle Kit facilitates movement
of the wire feeder. The Kit includes the handle
with rubber grip and hardware.
WIRE FEEDER WHEEL CART
P/N 34324
The Wheel Cart makes it easy to roll the wire
feeder around job site. Cart is 5-7/8 in. (15 cm)
high and includes base, front swivel caster
wheels, rear caster wheels, and mounting hard-
ware.
SWIVEL POST
P/N 34350
The Swivel Post installs into a tube on the top of select
power sources and allows the wire feeder to swivel freely
on the post.
WIRE REEL ADAPTOR
P/N 34323
The Wire Reel Adaptor provides a way to easily mount
the wire reel onto the wire feeder.
SWIVEL POST WITH MOUNTING
BRACKET
P/N 34075
The Swivel Post with Mounting Bracket attaches to the
Inverter Cart (P/N 31700) or other flat mounting surfaces
and allows the wire feeder to swivel freely on the post.
F-15-168 2/95 5C Printed In U.S.A.
SPOOL COVER KIT
P/N 34326
The Spool Cover Kit protects wire reels from job site
debris while the wire feeder is not in use.
/