Ponte Giulio USA G55JCR38 Dimensions Guide

Basic technical data sheet

G55JCR38

Stainless Steel

Code

Series

Use and installation info

Included with the product

Fasteners

90° Angle floor to wall stainless steel grab bar with outrigger and concealed

flange plates, right handed orientation. 1.25” diameter, 1.2mm wall thickness,

304 stainless steel.

Packaging information

8-1/8 x 31-1/2 x 34-1/2

Nylon bag in cardboard packaging

Type of package

Dimensions [WxDxH] In.

Weight lb.

Available colours

N1 Satin

Use

Wall installation

Clean using pure water and home disinfectants which have been sufficiently

diluted in water. Do not use abrasive detergents and trichloroethylene,

oxygenated water or acetone-based solvents.

Cleaning

331,00

88,00

Vertical lb.

In use weight capacity

Net weight lb.

8-1/16 x 31-1/2 x 34-1/2

Dimensions [WxDxH] In.

05/12/2011

Issued

29/04/2020

Revised

All herein data are subject to continuous technical updating. The manufacturer reserves the right to make change and

improvements to the product herein described without any previous notice.