D&B Z5460 Mounting instructions

Z5460
D&B
Brand
D&B
Model
Z5460
Type
Mounting instructions

This manual is also suitable for

d&b audiotechnik Z5460 is a versatile AL Stand adapter designed to mount a single AL60/AL90 or ALi60/ALi90 cabinet onto a standard loudspeaker high stand using the Z5458 AL Base plate. It enables the deployment of A-Series loudspeakers for various applications, including sound reinforcement for live events, corporate presentations, and house of worship services. With its sturdy construction and easy-to-use design, the Z5460 provides a secure and reliable mounting solution for A-Series loudspeakers in mobile or fixed installations.

d&b audiotechnik Z5460 is a versatile AL Stand adapter designed to mount a single AL60/AL90 or ALi60/ALi90 cabinet onto a standard loudspeaker high stand using the Z5458 AL Base plate. It enables the deployment of A-Series loudspeakers for various applications, including sound reinforcement for live events, corporate presentations, and house of worship services. With its sturdy construction and easy-to-use design, the Z5460 provides a secure and reliable mounting solution for A-Series loudspeakers in mobile or fixed installations.

Z
Z5460
Mounting instructions 1.1 en
S
y
m
b
o
l
s
o
n
t
h
e
p
r
o
d
u
c
t
P
l
e
a
s
e
r
e
f
e
r
t
o
t
h
e
i
n
f
o
r
m
a
t
i
o
n
i
n
t
h
e
m
a
n
u
a
l
.
W
A
R
N
I
N
G
!
D
a
n
g
e
r
o
u
s
v
o
l
t
a
g
e
!
General information
Z5460 Mounting instructions
Version: 1.1 en, 10/2020, D2749.EN .01
Copyright © 2020 by d&b audiotechnik GmbH & Co. KG; all
rights reserved.
Keep this document with the product or in a safe place
so that it is available for future reference.
We recommend you to regularly check the d&b website for the
latest version of this document.
When reselling this product, hand over this document to the new
owner.
d&b audiotechnik GmbH & Co. KG
Eugen-Adolff-Str. 134, D-71522 Backnang, Germany
T +49-7191-9669-0, F +49-7191-95 00 00
[email protected], www.dbaudio.com
1 Z5460 AL Stand adapter................................................... 4
1.1 Scope of supply.......................................................................... 4
1.2 Safety precautions...................................................................... 4
1.3 Intended use................................................................................ 5
1.4 Assembly..................................................................................... 5
2 Manufacturer's declarations........................................... 6
2.1 EU conformity (CE symbol)........................................................ 6
2.2 Disposal....................................................................................... 6
Contents
d&b Z5460 Mounting instructions 1.1 en 3
1.1 Scope of supply
Please verify the shipment for completeness and proper condition
of the items.
Pos. Qty. d&b Code Description
[1] 1 Z5460 d&b AL Stand adapter
Including:
[2] 4 Philips screw M6 x 16
[3] 4 Plastic washer Æ12
[4] 1 Fixing screw M8 x 16
1 D2749.EN .01 Z5460 Mounting instructions
Weight 5.8 kg (12.8 lb)
1.2 Safety precautions
General safety
▪ Installation and setup should only be carried out by qualified
and authorized personnel observing the valid national Rules for
the Prevention of Accidents (RPA).
▪ It is the responsibility of the person installing the assembly to
ensure that the suspension/fixing points are suitable for the
intended use.
▪ Always carry out a visual and functional inspection of the items
before use. In case there is any doubt as to the proper
functioning and safety of the items, these must be withdrawn
from use immediately.
Load safety information
NOTICE!
The Z5460 AL Stand adapter is designed to carry the weight of a
single AL60/ AL90 or ALi60/ALi90 cabinet mounted on the
Z5458 AL Base plate.
1 Z5460 AL Stand adapter
d&b Z5460 Mounting instructions 1.1 en4
1.3 Intended use
The AL Stand adapter is intended to deploy a single A-Series
loudspeaker on a standard loudspeaker high stand using the
Z5458 AL Base plate, as shown in the graphic opposite.
Applicable loudspeaker high stands are the d&b Z5009
Loudspeaker stand with winder and the d&bZ5013 Loudspeaker
stand with winder M20.
For low frequency extension, we recommend you to use the single
A-Series loudspeaker driven in CUT mode with one of the following
subwoofers:
▪ V-SUB
▪ V-GSUB
▪ Y-SUB
▪ B6-SUB
1.4 Assembly
Tools required:
▪ Philips screwdriver #PH2.
To attach the base plate to the stand adapter, proceed as follows:
1. Place the stand adapter on a suitable surface.
2. Attach the base plate onto the stand adapter, using the plastic
washers [3] and screws M6 x 16 [2], as shown in the
graphic opposite.
Attaching the cabinet to the base plate
For this purpose, please refer to the Z5458 Rigging manual which
is provided with the Base plate.
d&b Z5460 Mounting instructions 1.1 en 5
2.1 EU conformity (CE symbol)
This declaration applies to:
d&b Z5460 AL Stand adapter
manufactured by d&b audiotechnik GmbH & Co. KG.
All product variants are included, provided they correspond to the
original technical version and have not been subject to any later
design or electromechanical modifications.
We herewith declare that said products are in conformity with the
provisions of the respective EC directives including all applicable
amendments.
A detailed declaration is available on request and can be ordered
from d&b or downloaded from the d&b website at
www.dbaudio.com.
2.2 Disposal
When out of use the rigging components must be disposed of in
accordance with the national environmental regulations.
Ensure that damaged rigging components are disposed of in a
way that they cannot be used again.
2 Manufacturer's declarations
d&b Z5460 Mounting instructions 1.1 en6
D2749.EN .01, 10/2020 © d&b audiotechnik GmbH & Co. KG
www.dbaudio.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

D&B Z5460 Mounting instructions

Z5460
D&B
Brand
D&B
Model
Z5460
Type
Mounting instructions
This manual is also suitable for

d&b audiotechnik Z5460 is a versatile AL Stand adapter designed to mount a single AL60/AL90 or ALi60/ALi90 cabinet onto a standard loudspeaker high stand using the Z5458 AL Base plate. It enables the deployment of A-Series loudspeakers for various applications, including sound reinforcement for live events, corporate presentations, and house of worship services. With its sturdy construction and easy-to-use design, the Z5460 provides a secure and reliable mounting solution for A-Series loudspeakers in mobile or fixed installations.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents