Spectrum Industries 97503 Assembly Instructions

Hello! I've reviewed the assembly instructions for the Spectrum Rack Mount Pull Out Shelves, models 97501 and 97503. This document provides a parts list and step-by-step instructions for mounting the shelf to rack rails, including the adhesive non-slip mat. I'm ready to answer any questions you have about its assembly or features.
What type of screws are used for assembly?

Where should the shelf be mounted?

Is there a non-slip surface provided?

Assembly Instructions:

PARTS LIST

(6) 10-32 x 5/8” Truss Head

Machine Screws #050184

1600 Johnson St. P.O. Box 400 Chippewa Falls, WI 54729 Ph. 1-800-235-1262 Fax. 1-800-335-0473

email [email protected] www.spectrumfurniture.com #050261QR5

1 of 1

RACK RAILS

SHELF

10-32 X 5/8” THMS

Before you begin, please make sure all parts and proper

quantities are included. Any parts damaged during shipment

must be reported within 15 days of receipt. To report informa-

tion regarding damages or if you have any questions, please

call 1-800-235-1262.

Figure 1

RACK MOUNT PULL OUT SHELF #97501 & 97503

A. Using the 10-32 x 5/8” THMS, attach the Rack Mount Pull Out Shelf

to the Rack Rails. See Figure 1.

B. Do not attach to rear Rack Rail if equipped. Shelf is designed to

mount on pull-out side only.

C. An adhesive mat is provided, this can be adhered to the shelf

to provide a non-slip surface.

CONNECT PULL OUT SHELF TO RACK RAILS

(1) Non-Slip Adhesive Mat

#052093