2. urban ambiance
  3. UQL1672

urban ambiance UQL1672 Installation guide

  • I have read the Installation Instructions for the UQL1672 Light Fixture. This document provides a step-by-step guide for installing the light fixture, including mounting the crossbar, wiring connections, and installing the fixture body. It also outlines safety precautions and bulb requirements. I'm ready to help answer any questions you may have about installing this product.
  • What type of bulbs are required?
    Are bulbs included in the package?
    What should I do if I have missing or damaged parts?
1of3
LightSourceToolsRequired
2BULBSREQUIRED
BULBSNOTINCLUDED
Warnings and Cautions
Turn off the electricity at the circuit breaker before installation.
Consult a licensed electrician if in doubt about installation.
Turn off power to the fixture and allow the bulbs to cool before
replacing.
Package Contents
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Fixture Body
x1
Table of
Contents
E
Crossbar
Assembly
x1
A
PARTS BAG
Outlet Box Screw
x2
C
Wire Connector
x3
D
Mounting Screw
x2
B
Exterior Caulk
Crossbar Assembly Wiring
STEP 1 STEP 2
Fixture Body
STEP 3
Bulb
STEP 4 STEP 5
Caulk
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
Installation Instructions: UQL1672
www.urbanambiance.com
2of3
STEP 1
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
White wire
from fixture
Black wire
from fixture
Ground wire
from Fixture
STEP 2
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
STEP 3 1
Remove papers
inside of the cage
Install fixture body
2
Remove
Papers
www.urbanambiance.com
3of3
STEP 4
STEP 5
Exterior Caulk
www.urbanambiance.com
/