Contec CPSN-DI-08BL Reference guide

Type
Reference guide

This manual is also suitable for

Reference Manual
(Hardware)
CONTENTS
Digital Input Module
CPSN-DI-08L
Digital Input Module Built-in power supply
CPSN-DI-08BL
Introduction .................................................................. 4
Safety Precautions .................................................... 10
Product Nomenclature and Function................ 16
Installation ................................................................... 22
Appendix ...................................................................... 35
Optional Products .................................................... 41
Customer Support and Inquiry ............................ 43
2
Table of Contents
Introduction .................................................................... 4
1. Related Manuals ...................................................................................................................................... 5
2. Check the Firmware Version .................................................................................................................. 6
3. About the Product ................................................................................................................................... 7
4. Features ..................................................................................................................................................... 8
5. Product Configuration List..................................................................................................................... 9
Safety Precautions ........................................................ 10
1. Safety Information ................................................................................................................................. 11
2. Handling Precautions............................................................................................................................ 12
1. FCC PART15 Subpart B Class A Notice ........................................................................................ 15
2. CE EMC Directive Class A Notice .................................................................................................. 15
Product Nomenclature and Function ........................... 16
1. Nomenclature of Product Components............................................................................................ 17
2. Description of Product Components ................................................................................................. 18
1. LED Indicator..................................................................................................................................... 18
2. Isolation Digital Input Connector ................................................................................................. 19
3. Other Functions ..................................................................................................................................... 21
1. Input Pulse Filter .............................................................................................................................. 21
Installation ..................................................................... 22
1. Install the Product ................................................................................................................................. 23
1. Installation Conditions .................................................................................................................... 23
2. Installing and Removing I/O Module and Blank Panels .......................................................... 26
2. Connecting to an External Device ...................................................................................................... 28
3. Cable Connection .................................................................................................................................. 29
1. Digital Input ...................................................................................................................................... 29
2. Digital Input (DI)............................................................................................................................... 30
Appendix ....................................................................... 35
1. Specifications.......................................................................................................................................... 36
2. Physical Dimensions .............................................................................................................................. 38
3. Relationship between logic ports, logic bits and connector signals ........................................... 39
4. The Details of Model Name................................................................................................................. 40
Optional Products ......................................................... 41
1. Optional Products.................................................................................................................................. 42
3
Table of Contents
Customer Support and Inquiry..................................... 43
1. Services .................................................................................................................................................... 44
4
Introduction
This section provides necessary information of the product
such as the outline, bundled items and manuals before
actual use.
Introduction
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
5
1. Related Manuals
The manuals related to the product are listed below.
Read them as necessary along with this document.
Must Read the Following Manuals.
Name
Purpose
Contents
How to get
Product Guide
Must read this after opening the
package.
This lists the product configuration
and describes the precautions.
Included in the package
(Printed matter)
Reference Manual for I/O
Module (Hardware)
(This Document)
Read this when operating the
I/O module with CPU Unit.
This describes the hardware aspects
such as functions and settings of the
I/O module.
Download from
the Contec
website (PDF)
CPU unit Reference
Manual (Hardware)
Read this when operating the
product.
This describes the hardware aspects
such as functions and settings.
Download from
the Contec
website (PDF)
CPU unit Reference
Manual (Software)
Read this when setting up the
"CONPROSYS nano WEB
Setting"
This describes how to set each
function of "CONPROSYS nano WEB
Setting".
Download from
the Contec
website (PDF)
USB I/O Unit - Module
Type Reference Manual
(Hardware)
Read this when operating the
product.
This describes the hardware aspects
such as functions and settings.
Download from
the Contec
website (PDF)
Download Manuals
Download the manuals accordingly from the following URL.
Download
Introduction
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
6
2. Check the Firmware Version
Before start using the product, visit our website to check the firmware version and update to the
latest one if necessary.
Updating firmware to the latest version will resolve troubles and stabilize the operation.
Download
Refer to the "Reference Manual (Software)" for CPU Units or "Reference Manual" for Modular
USB I/O Units for the details of the firmware updating.
Introduction
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
7
3. About the Product
This product is an expansion I/O module that adds an opto-coupler isolated input interface with a
response speed of 200 μsec or less to the CPU unit of the CONPROSYS nano series or USB I/O Unit
- Module Type.
The CPSN-DI-08L is equipped with 8 inputs and 1 common that support current sink/source output.
This product can also be used with an external circuit power supply of 12 to 24 V.
The CPSN-DI-08BL is equipped with 8 inputs and 1 common that support current sink output. This
product's internal circuit also has a built-in power supply, so no external circuit power supply is
necessary.
Introduction
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
8
4. Features
Opto-coupler isolated input
CPSN-DI-08L has the opto-coupler isolated input 8 channels (supporting current sink/source output) whose response speed is 200µsec
or less.
CPSN-DI-08BL has the opto-coupler isolated input 8 channels (supporting current sink output) whose response speed is 200µsec or less.
Internal circuit power supply (CPSN-DI-08BL only)
The CPSN-DI-08BL ‘s internal circuit has a built-in power supply, so no external circuit power supply is necessary.
All of the input signals are usable as interrupt events.
You can use all of the input signals as interrupt events and also disable or enable the interrupt in bit units and select the interrupt edge.
Equipped with an input pulse filter function to prevent
false recognition of input signals due to noise and
chattering
This product is equipped with an input pulse filter that can prevent input signal noise and chattering. The input pulse filter can be applied
to all input terminals, and configuration can be performed using the software.
Easy installation and removal
This product can be installed in and removed from the CPU unit or USB I/O Unit - Module Type without any tools.
Adaptable to a wide range of temperature between -20
and +60°C
The product is capable of operating in the temperature between -20 and + 60°C. It can be installed
in the various environments.
Equipped with the LED for an operation check
The product has the LED for an operation check, which helps you visually confirm the communication status of each interface.
No electrolytic capacitor
Without an electrolytic capacitor, which has a limited life, we are creating the product with a longer life.
Introduction
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
9
5. Product Configuration List
The product consists of the items listed below.
Check, with the following list, that your package is complete.
If you discover damaged or missing items, contact your retailer.
Product…1
10-pin Connector…1
(attached to the product)
Product Guide & Warranty
Certificate…1
Serial Number Label…1
10
Safety Precautions
Understand the following definitions and precautions to
use the product safely.
Never fail to read them before using the product.
Safety Precautions
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
11
1. Safety Information
This document provides safety information using the following symbols to prevent accidents
resulting in injury or death and the destruction of equipment and resources.
Understand the meanings of these labels to operate the equipment safely.
DANGER
Signal word used to indicate an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING
Signal word used to indicate a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION
Signal word used to indicate a potentially hazardous situation which, if
not avoided, could result in minor or moderate injury.
Safety Precautions
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
12
2. Handling Precautions
DANGER
Do not use the product in locations exposed to a flammable or corrosive gas. It may cause
explosion, fire, electrical shock, or malfunction.
Do not allow the device to come into contact with foreign substances (metal particles,
flammable substances, liquids, etc.) Otherwise, it can cause fire or electrical shock.
Do not place the product in an unstable location or use incomplete mountings. Otherwise, it
may cause the device to fall.
Be sure to connect the product to the stipulated power supply voltage. Connecting to a
different voltage might cause a fire or electrical shock.
If the product is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired.
The product is not intended for use in aerospace, space, nuclear power, medical equipment,
or other applications that require a very high level of reliability. Do not use the product in
such applications.
If using the product in applications where safety is critical such as in railways, automotive, or
disaster prevention or security systems, please contact your retailer.
CAUTION
Be certain the following requirements are satisfied when using the product.
- Indoor use
- Altitude up to 5000m
- Applicable POLLUTION DEGREE 2
When using the product at high altitudes, refer to the relational expression below to find an
appropriate ambient temperature. The heat dissipation decreases due to air pressure drop
and could lead to damages or a shorter product life.
- Ambient temperature = 60[°C] - 0.005 x altitude [m]
An Example)
The product is used at 3000 meters
60°C - (0.005 x 3000m) = 45°C (Ambient temperature)
Do not use or store the product in a location exposed to extremely high or low temperature
that exceeds range of specification or susceptible to rapid temperature changes.
e.g. - Exposure to direct sun
- In the vicinity of a heat source
Safety Precautions
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
13
Do not use the product in extremely humid or dusty locations. It is extremely dangerous to
use the product with its interior penetrated by water or any other fluid or conductive dust. If
the product must be used in such an environment, install it on a dust-proof control panel, for
example.
Avoid using or storing the product in locations subject to shock or vibration that exceeds
range of specification.
When transporting the product, take suitable measures to avoid applying shock or vibration
directly to the product.
Impact resistance: 15G (11ms) below.
Use the product in the specified operating condition (temperature, humidity, vibration and
shock).
Avoid installing in the place where ventilation of the product may compromise. Insufficient
aeration could heat up the product and lead to malfunctions or damages.
Do not use the product in the vicinity of devices that generate strong magnetic force or noise.
Such products will cause the product to malfunction (stop, reboot).
Do not use or store the product in the presence of chemicals.
When removing connectors or cables, always unplug the power cables of the CPU unit or USB
I/O Unit - Module Type first, and confirm the LEDs are turned off.
Do not modify the product. CONTEC will bear no responsibility for any problems, etc.,
resulting from modifying the product.
In the event of failure or abnormality (foul smells or excessive heat generation), unplug the
power cables of the CPU unit or USB I/O Unit - Module Type immediately and contact your
retailer.
When using the product in an overly noisy environment, use a grounded, shielded cable to
connect with peripherals.
To clean the product, wipe it gently with a soft cloth dampened with either water or mild
detergent. Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent
the paint to be scraped or discolored.
When connecting cables, first check the shapes of connectors, and then insert them in the
correct orientation. After they are connected, do not put too much load on the connected
part. Doing so may result in poor contact or damage to the product and the connected part.
Do not touch metal parts or terminals with your hands when the product is in operation.
Otherwise, the product may malfunction, or cause failure.
Do not touch the front panels with your hands when the product is in operation. Otherwise,
the product may malfunction or cause failure.
Do not touch the product or connectors with a wet hand to avoid electric shock.
The specifications of the product are subject to change without notice for enhancement and
quality improvement. Even when using the product continuously, be sure to read the manual
in the CONTEC's website and understand the contents.
When the product is used in a place that is affected by overcurrent or overvoltage (lightning
surge), select appropriate surge protection device for all of the route (Signal line, Power line,
Safety Precautions
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
14
Earth etc.). Consult with the specialist regarding selecting, purchasing, and setting the surge
protection device.
The product is an open-type device (a device designed to be housed inside other equipment)
and must always be mounted inside a mechanical enclosure having enough strength.
Do not strike or bend this product. Otherwise, this product may malfunction, overheat, cause
a failure or breakage.
Do not touch this product's metal plated terminals (edge connector) with your hands.
Otherwise, this product may malfunction, overheat, or cause a failure.
If the terminals are touched by someone's hands, clean the terminals with industrial alcohol.
When disposing of the product, follow the disposal procedures stipulated under the relevant
laws and municipal ordinances.
Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(Including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
Safety Precautions
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
15
1. FCC PART15 Subpart B Class A Notice
NOTE
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own
expense.
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
2. CE EMC Directive Class A Notice
EN55032 Class A Notice
Warning:
Operation of this equipment in a residential environment could cause radio interference.
16
Product Nomenclature
and Function
This section describes product component names and their
functions, pin assignment of each connector.
Product Nomenclature and Function
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
17
1. Nomenclature of Product Components
Component names of the product are shown in the figure below.
No.
Name
Function
1
LED Indicator
Displays the digital input status.
2
Interface Connector
This is a connector for digital input.
Use the 10-pin connector, included in this package.
Product Nomenclature and Function
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
18
2. Description of Product Components
Components such as connectors, switches are described.
1. LED Indicator
When all the digital inputs are OFF, the LEDs all turn off. The hexadecimal value (0x00) can be
obtained with the software. When all the digital inputs are ON, the LEDs all turn on. The hexadecimal
value (0xFF) can be obtained with the software. The lowest-order bit corresponds to DI0, and the
highest-order bit corresponds to DI7.
Color and Description
LED
Color
Display
Description
DI0 - DI7
Green
ON
It lights up upon inputting.
OFF
It indicates there in no inputting or the CPU unit or USB I/O Unit
- Module Type is powered off.
Product Nomenclature and Function
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
19
2. Isolation Digital Input Connector
This product has 8 channels of digital input. Use the 10-pin connector, included in this package.
Connector type : DEGSON 15EDGKC-3.81-10P-13 (or equivalent)
Digital input connector <CPSN-DI-08L>
Pin Assignment
Pin No.
Signal Name
Description
1 COM
When connecting to sink output, connect this pin to the positive side of the
external circuit power supply.
When connecting to source output, connect this pin to the negative side of
the external circuit power supply.
There is one common for DI0 to DI7.
2
N.C.
This pin is not connected.
3 - 10 DI0 – DI7
This indicates the input signals. It connects the output signals from the
other devices.
1
2
3
4
5
6
7
8
9
10
Product Nomenclature and Function
CPSN-DI-08L, CPSN-DI-08BL Reference Manual (Hardware)
20
Digital input connector <CPSN-DI-08BL>
Pin Assignment
Pin No.
Signal Name
Description
1 PCOM
This pin outputs the positive side of the internal power supply. It can be
used in operations such as lighting LEDs on other devices.
2 MCOM
This connects the negative-side of the external power. It shares with 8
channels of input signal (DI0 - DI7).
3 - 10 DI0 – DI7
This indicates the input signals. It connects the output signals from the
other devices.
CAUTION
To implement input/output of this product with our device driver, it is necessary to specify logical
ports and logical bits when executing each function. For details, refer to "Relationship between
logic ports, logic bits and connector signals (Page39)”.
1
2
3
4
5
6
7
8
9
10
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46

Contec CPSN-DI-08BL Reference guide

Type
Reference guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI