iO HVAC Controls RBD-XX User manual

5351 East Thompson Road Suite 142

Indianapolis, IN 46237

P: 888.359.0362

F:317.489.5204

www.iOhvaccontrols.com

Specications:

Sizes 6”, 8”

Damper Actuator Type 24VAC, 1.5VA, 3-wire power open/power close

Timing 35 seconds

RBD-XX

Features and Benets:

• Solution for installing dampers when the ductwork

is not accessible

• Does not require the ductwork to be taken apart

• Compatible with most zone control panels and

systems

• Saves time and cuts labor costs

Warranty:

• 5 Years

The RBD Register Boot Damper is a retrot zone damper designed to be installed in a register boot without having to

take the duct work apart. RBD Register Boot Dampers are available for register boots with 6” and 8” collars and can be

installed in most boot congurations.

EQUIPPED WITH

ACTUATORS

Just slide damper in and screw down

the mounting bracket.

iO-04-1280-111022