OS10
MIYOTA MOVEMENT
TW STEEL
MAINTENANCE
TW Steel uses the best materials and carries out
strict controls before the watch leaves the factory.
The way in which you wear or treat your TW Steel
will determine whether the appearance of the
watch is maintained in the future, or whether it will
deteriorate. In order to enjoy wearing your TW Steel
as long as possible, we include a number of tips: If
the watch comes into contact with hard or corrosive
materials, this can cause damage, which, if it occurs
regularly, will become clearly visible in the form of
scratches.
Your watch should be cleaned with a soft cotton cloth
that is not impregnated with any cleaning material.
Absolutely no cleaning materials should be used. It
is advisable to regularly polish your watch with a soft
cotton cloth. The watch is a precision mechanical
instrument and should be treated as such. Adjusting
the time or date, opening or closing the crown or
crowncap, should not be done roughly, but carefully.
TW Steel is a watch brand harmoniously combining both design and
innovation. ‘The Watch in Steel’ leads the oversized market with style and
quality guaranteed. TW Steel values the most important relationship of all
– the one with the consumer. To express this, we hereby give you all the
information that you need to enjoy your TW Steel watch to the fullest.
OS10 MIYOTA MOVEMENT
SETTING THE TIME
1. Pull the crown out to the 2nd Click Position.
2. Turn the crown to set hour and minute hands.
3. When the crown is pushed back to the normal position,
small second hand begins to run.
SETTING THE DATE
1. Pull the crown out to the 1st position.
2. Turn the crown counter-clockwise to set the date.
*If the date is set between the hours of around 9:00 PM
and 1:00 AM, the date may not change on the following day.
3. After the date has been set, push the crown back to the
normal position.
USING THE CHRONOGRAPH
The chronograph is able to measure and display the time
in 1/1 second united up to a maximum of 11 hours 59 minutes
and 59 seconds. The chronograph second hand keeps running
continuously for 11 hours 59 minutes and 59 seconds after starting.
Measuring time with the stopwatch
1. The chronograph can be started and stopped each time
button “A” is pressed.
2. Press button “B” to reset the chronograph and the chronograph
second hand, chronograph minute hand, and chronograph hour
hand return to the zero positions.
CAUTION : IF THE CROWN IS NOT PRESSED IN PROPERLY, THE WATCH IS NO
LONGER WATERPROOF AND THE MOVEMENT CAN BE SERIOUSLY DAMAGED!
CHRONOGRAPH RESET (INCL. AFTER
REPLACING BATTERY)
This procedure should be performed when the chronograph second
hand does not return to the Zero position after the chronograph has
been reset, and including after the battery has been replaced.
1. Pull the crown out to the 2nd position.
2. Press the button “A” to set the chronograph second hand
to the Zero position.
3. Press the button “B” once to set the chronograph 1/20
second hand to the Zero position.
*The chronograph hands can be advanced rapidly by continuously
pressing button “A”.
4. Once the hand have been zeroed, return the crown
to the normal position.
*Do not push crown to normal position while the chronograph
second hand returns to zero position. It stops on the way when
crown are returned to normal position and its position is
recognized as zero position.
1st position
2nd position
Minute hand
Button A
Chronograph
second hand
Chronograph
minute hand
Button B
Hour hand
Chronograph
hour hand Calendar
Normal crown position
Small second hand
-
1
-
2
-
3
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
seapro 7750 Instruction Manual And Warranty
-
Festina F16169 Owner's manual
-
Quicksilver Hedi User manual
-
BREIL OS10 Owner's manual
-
Lancaster MIYOTA OS21 User manual
-
Airspeed MIYOTA JAPAN User manual
-
Aulta KAINOA User manual
-
JACK MASON JM-A602-103 User manual
-
XERIC Halograph II Chrono Operating instructions
-
Aulta ACUATICO AUTOMATIC User manual
